ARISTON Electric oven reasons do not work. Repair of a power regulator

The oven of the electric does not turn on. The oven does not work

No matter how good and high.quality household appliances would be sooner or later, it will begin to fail. This applies to both gas and built.in electric ovens. Even such well.known manufacturers as Bosch, Electrolux, Ariston, Hans, Kaiser and Samsung cannot guarantee the eternal work of their works. It’s good if the purchased equipment is still under warranty, and if not, all repair work will have to be done with your own hands or call the master. So, how to eliminate the malfunctions of an electric oven cabinet?

Elimination of faults of ovens, if they are still under warranty, passes quite simply. A master from the service center is called to the house and inspects the unit. If the breakdown is insignificant and it can easily be eliminated in place, then this is what is done. In more complex cases, the oven is taken to the service center. Its repair time is usually no more than 45 days. Sometimes there are cases that a gas or electric built.in oven is changed to a new. This happens if the device was faulty from the very beginning.

Typically, warranty repairs are free, but you will have to pay if the Bosch, Hans, Ariston, Electrolux, Samsung or Kaiser has broken as a result of:

Also, the repair will not be free if there are scratches, scuffs or traces of autopsy on the device, and its configuration has also changed.

Basic breakdowns

If a gas or electric built.in oven is no longer under warranty, then you will have to repair it with a master or with your own hands. When choosing the last method, before moving on to eliminate the malfunction, it is necessary to determine its cause.

Most often, the following faults of the oven Electrolux, Bosch, Hans, Kaiser and Ariston:

The breakdown of one or several heating elements should be thought if the dishes are prepared unevenly, one side of them when cooking at maximum temperature is greatly baked, and the second remains practically untouched. In order to verify the assumption, you need to turn on the oven and after a while with the hand wrapped in a towel, touch the hetes. If one of them is cold, you will have to replace it with new. You can easily do it with your own hands.

It happens that the heating elements are normal, the temperature is set correctly, and the dishes still do not want to evenly bake. In this case, the thermostat was most likely broken. The elimination of such malfunctions of the ovens Ariston, Bosch or Electrolux requires the involvement of an experienced master.

Typically, the oven of manufacturers of Bosch, Hans and others are equipped with a self.diagnosis system (see. a photo). If malfunctions occur in the operation of the equipment, errors are immediately indicated on the electronic screen. It is worth noting that each manufacturer has its own codes, so before moving on to eliminate the malfunction, you must carefully familiarize yourself with the instructions.

Often problems with household appliances arise due to the inattention of the owners. They forget to clean it, close the door tightly during cooking, accidentally turn it off from a power source and t.D. As a result of this, dirt accumulates inside the oven, heating elements overheat, t.to. cannot provide the necessary temperature, other failures occur. So, you often have to eliminate the faults of the oven Bosch, associated with the breakdown of the timer, contacts and other elements. Often it is not possible to eliminate such breakdowns independently, so you have to seek help from experienced craftsmen, which is not always cheap.

Ovens are used, in industrial and in home cuisines. Experienced cooks and housewives know that dishes cooked in the oven are many times more useful, fried and boiled products. But, the need and usefulness of household appliances does not guarantee the eternal operation of the unit. Damage of kitchen equipment is often found. In this situation, it is important not to be confused, but to understand the essence of the problem in order to know exactly what measures to take in this case. So what to do if the oven is not turned on?

Certificates of the service center

The professionalism of our service center is confirmed by a large number of different certificates

Ariston electric ovens is chosen by many lovers of modern household appliances. However, even the latest oven model over time may fail. Sometimes the device does not turn on. Let us dwell on this problem in more detail.

Why does the HotPoint Ariston Electric oven not turn on

If the Ariston device does not respond to inclusion, there may be several causes. Let us dwell on the popular ones with whom the master of the service center can help.

  • The failure of the heating element. With a breakdown of heating, the oven does not perform its functionality. The master will replace the damaged part with the working.
  • Problems in the fan, or elements involved in the heating of the unit. Thermal protection is triggered, and the operation of the Ariston HotPoint electrical device is interrupted. During the diagnosis, the engineer will find out the condition of the internal parts, if necessary, install new components instead of damaged.
  • Tymer malfunction. Когда возникают проблемы с электротаймером, включается блокировка на активацию работы электрической духовки. As a result, the unit does not turn on.
  • The switches failed. Perhaps the contacts of the details have burned out. The specialist seals damaged wires or replace the switches provided that serious malfunctions.
  • The terminal block was damaged.

If the electrical appliance does not turn on, the help of a qualified service specialist will be required. However, a number of events can be done independently.

Tips on how to extend the life of the oven in an electric stove

So that the oven breakdown does not happen, and the unit served as long as possible listen to the following tips.

  • It is necessary to clean the inner surface of the oven neatly. Soft sponges are suitable for these purposes. Metal brushes scratch the surface, so using them is not recommended. Ideal creamy or cleaning products.
  • If there are aluminum elements on the outer surface of the oven, then before washing it is recommended to lubricate them with vegetable oil. End the procedure with alcohol.based cleaning agent.
  • A solution of vinegar will cope well with pollution. This method is suitable for internal surfaces.
  • To remove accumulated fat, and with it an unpleasant smell, you need to put a frying pan from 1/3 cup of ammonia in a not.waristic oven in a warmed oven.
  • If the menu involves the preparation of a pie with a juicy filling, the drops of which are left with difficult spots, it is appropriate to put a deep tray.
  • No need to put dishes with a raw bottom in a hot oven.
  • With old fat pollution, you should warm the device up to 50 degrees. Then wipe the inside of the wet soft rag.
  • Cleaning the external parts of electric articulation should be carried out in the state turned off from the network. This will not fail in software settings.
  • It is better to clean the glass door with a soap solution.
  • It is necessary to periodically (once every 2-3 months) visual inspection of the main elements.
  • In the inaccurate state, the door should be closed.
  • All switches need to be washed very carefully. The oven must be turned off.

In the hands of a caring housewife, any item of household appliances will last a long time. It is important to regularly check the elements of the oven cabinet. Take care of them, observing recommendations. With proper operation, this electrical device is able to last up to 15 years.

Do.it.yourself oven repair

Details: Repair of Ariston oven with your own hands from a real master for Olenord.com.

No matter how expensive and high.quality household appliances may be, in the process of long or improper operation, it can fail. This also applies to electric ovens. Even such well.known manufacturers as Whirlpool, burning, Ariston, Electrolux and Bosch cannot guarantee the smooth operation of their products in various conditions. And if the warranty time has already come out, then the repair of oven with your own hands will be required.

In the case when the oven fails, and the guarantee still continues to operate, then it is worth contacting the service center or a trading institution for help in which the equipment was purchased. After writing the application at the specified address, the master must come to inspect the unit. In the case of a simple breakdown or a master of the desired spare part, the device can also be performed at home. If we are talking about more complex cases, then the service center takes the oven, undertaking to return it for 45 days without any defects and failures in work.

If the breakdown did not occur due to the fault of the owner of the oven, and the master could not eliminate it completely, then the company is obliged to exchange the device for a new. As a rule, all well.known manufacturers, including Whirlpool, burning, Ariston, Electrolux and Bosch, provide a warranty period for their own products from 2 years.

However, even if there is a valid warranty, free repair will not be carried out in the following cases:

  • Damage occurred due to voltage drops.
  • Docks in the work are related to the initially incorrect connection of the oven cabinet.
  • The device has broken due to its inner rodents or insects that have penetrated its inner.
  • If there are traces of independent repair or autopsy on the unit. all kinds of scratches, solders or scuffs. In this case, the repair of electric ovens will be paid, even if the breakdown is associated with marriage in production.
ariston, electric, oven, reasons

If the guarantee is already overdue or the malfunction occurred through the fault of the owner himself, then the repair of built.in ovens can occur in two ways. with professional masters or with their own hands, as shown in the video.

First of all, you will need to independently determine the cause of the malfunction. If we are talking about a simple breakdown, then you can eliminate it with savings for the family budget with your own hands. If we are talking about replacing an expensive spare part, then it is worth entrusting such a responsible work to a specialized service center.

Most often, the repair of Ariston ovens and other manufacturers is required when the following breakdowns occur:

  • Stan problems. If the dish is prepared for a long time at maximum temperature, and at the same time one side is much paler than the other, then we can talk about failures in the operation of one of the heating elements. It is very simple to identify such a breakdown and with your own hands. just turn on the electric oven for a couple of seconds, and then touch the dress dressed with your hand to the heater. If they do not heat up, then they are required to replace them with a new part. As a rule, this kind of spare parts is inexpensive, and their replacement can be carried out with your own hand.
  • The thermostat broke. With the correct operation of all heating elements and a properly set temperature, the dish was not baked even after a long time? We can talk about malfunctions in the work of the thermostat. It is quite problematic to identify such a breakdown on your own, so it is better to immediately call an experienced master.
  • Errors displayed in codes. As a rule, Whirlpool units, burning, Ariston, Electrolux and Bosch with an electronic display are complemented by self.diagnosis function, as shown in the photo. If malfunctions occur in the system, then information about them in the form of characters will appear on the monitor. Each manufacturer uses its own codes, which are necessarily prescribed in the instructions for the technique. No matter what error is displayed on the screen, it can be eliminated independently, while following all the tips written in the instructions.

Tearing portal about repairing washing machines with your own hands, repair of dishwashers, repair of boilers and refrigerators

There are instructions for electric and gas plates, hobs and ovens of Ariston and HotPoint-Ariston. To download the leadership, you need to find a model of your device and click on the name, the file will open in a new tab.

ariston, electric, oven, reasons

The products of the company are known and loved all over the world thanks to several important parameters that highlight the brand among other manufacturers.

Firstly, HotPoint is distinguished by the ability to create smart equipment with a stylish design. The company has a long and rich history, vast experience, which allows you to use the latest technologies and development in production. Therefore, the products of this company always look unsurpassed in the kitchen and make our life easier, thanks to their outstanding characteristics.

Secondly, the devices of this manufacturer are smart, which means that they used innovations aimed at reducing electricity consumption. Technologies that are used in brand devices allow you to carefully spend natural resources.

Various devices can be used for cooking, but due to frequent use and intensive work, they are especially susceptible to breakdowns. Repair of electric stoves can be carried out with your own hands at home without taking a bulky equipment to a service center.

Despite external complexity, this device has a very simple design. All working elements are installed in a special heat.resistant cabinet made of alloy steel.

The principle of operation of the electric stove is based on heating the heater by leaking electric current on it. The device is equipped with heating elements that are necessary for cooking. They are ceramic, tubular, halogen, continuous.

Hotpoint Electric Oven Troubleshooting

  • Ceramic burners are presented in the form of a tube, so they can be used for any electric stoves and their repair is very easy to carry out yourself. The spiral is laid in the hole in the plate and fixed using special parts. Now glass ceramics are increasingly used, which is more affordable and durable, in addition, it is washed;
  • Halogen burners are considered economical, they work due to halogen lamps with reflectors. These lighting devices are installed in various areas of the hob and provide rapid heating and low electric energy consumption;
  • In old domestic tiles (dream, ZVI and others), cast.iron spiral hets were often installed. They slowly heated, but after disconnecting they gave the heat for a very long time. Separately, it is necessary to note their durability and resistance to moisture and the effects of high temperatures;
  • Tubular spiral made of a hollow pipe. When heated, it not only gives heat, but also promotes the circulation of warm air inside itself, which allows you to increase the efficiency of the device. This type of fireplace is most difficult to repair yourself.

To power the slab, a power wire is used, which is connected to all burners. In addition, they are also connected to regulators and thermostats that act as a system of safety system. After turning on, the wire begins to transfer energy to the heater, which is necessary for cooking. Control the level of heating and the burner must be using the corresponding handle. Many household plates of Ardo (Ardo), Indesit (Indesit), Electrolux (Electrolux), Zanussi (Zanussi) and others besides these devices also build.ups and signaling devices. They help to control cooking time.

Photo. modern slab with halogen lamps and sensor

Unlike gas, electric stoves are considered quite safe in everyday use. Their repair and maintenance can be easily performed independently, and in terms of durability they are much better than gas models. In particular, this is because they can be cleaned at home, and not wait for the arrival of a specialist.

  • When working, the smell of burning appears. If the smell of burning food is worried, then the repair is not needed, it is required to clean the cooking surface. If it stinks of plastic or rubber, then you need to urgently call an electrician;
  • The burner does not warm. The reason may be the absence of voltage, the problem of the spiral or the control handle. It will be required to repair the burner or its wire;
  • The heating temperature is not tuned. It will definitely require repair of the mode switch;
  • The burner does not heat up. The frequent problem of desktop and stationary plates is that they crackle. They can be destroyed as a result of a blow or from a sharp temperature difference (for example, the spiral was heated, and cold water accidentally fell on it). This is the reason for the lack of heating of the burner or uneven heating of food. Independent repair of the spiral is very easy to carry out without the help of the master. the thicket of everything just needs to be replaced;
  • Bad work of the oven. Most likely, the problem also lies in the breakdown of the spiral.

It should be noted right away that the corporate service will not undertake to carry out warranty repairs after extraneous intervention. Therefore, if you do not have such an experience, then it is better to immediately contact specialized workshops.

The arrangement of the oven

When looking at the oven, the user will see little. Lattices, backlight lamp, grill and protective thermal casing open. But the arrangement of the oven is much more complicated. The design includes a number of key components responsible for the formation of temperature and air circulation.

Lower Ten

The heating element below is in all ovens. It is he who forms the main heat stream for cooking. This element is not visible, closed by a thermal coojukh.

Ring Ten

Ring Ten works in convection mode. At the same time, a fan turns on, which distributes hot air throughout the oven volume. Such an option is not in all models of cabinets.

Upper Ten

Open Upper Ten is only in oven with an option of grill. Its task is both to ensure baking the product from all sides, and creating an appetizing crust on the surface of the dish. The security system controls the operation of the upper heating element, the heater automatically turns off when the door is opened.

The regime selection unit

It can be either a circular switch or an electronic program for choosing a program. Depending on the complexity of the oven model, the user can stop at the grill mode, activate the convection system, and use other options.

Temperature regulator

In models of ovens with electronic control, the temperature can be adjusted automatically, depending on the cooking program chosen by the user. There is also an opportunity to set an exact value. In inexpensive models, this is done by a circular regulator, a familiar pen.

Thermal cake

The task of thermal coojukh, the internal walls of the oven, consists not only in protecting the user from the danger of touching hot heaters. This metal shell evenly distributes heat, providing proper cooking.

Ventilation holes

Ventilation holes paired with a fan not only take off pairs of food and excessive heated air. They cool the inside of the oven by the moment when it is time to remove cooked food from it, for the complete comfort of using the device.

The fan in the oven is responsible for the distribution of heat

Information table

The main information that is displayed on the display of the oven is the time of execution of the given program. When the device is not busy with its main work, hours or other data can be displayed on the scoreboard.

Door with heat.resistant glass

The door performs several tasks at once. She closes the oven camera and does not allow heat leaks. Through its transparent heat.resistant glass, you can monitor the state of food. In addition, the door works like a user protection. Contact modules built in it are monitored by the safety system of the oven.

Finally, the functioning of the oven is impossible without an electronic control module and numerous temperature control sensors. The complexity level of electronic and hardware components depends on the class of the oven, its cost and the number of options offered.

What can break

Any oven, as well as another complex device, may break. There are many typical faults, the reasons for which are understandable even to users without special knowledge.

  • If after setting the temperature, time and modes the device does not warm, you need to check the condition of the power cable. It will not be superfluous and make sure that the rosette is normal voltage.
  • If the heater does not shine, and there is no heating, it is recommended to first check the correct setting of the modes and the choice of the program. You can also use the recommendations of the manufacturer to eliminate such a problem.
  • There is overheating, products burn. this shows the thermostat. The wrong operation of this device also leads to a low temperature inside the oven.
  • If the food is poorly baked, it is not prepared normally even with an increased process time. you should pay attention to heaters. Most likely, one of the hets will have to be replaced.

In a completely non.working oven, in most cases, the electronic control module fails. It can be replaced or reflash. However, such a repair requires special knowledge.

Some models of ovens have a self.diagnosis system. They report about the breakdown with codes on the display. For example, the ER17 error in Ariston models shows that the temperature in the oven does not grow within 125 seconds, and you need to check the power, condition of the heating elements, and the control sensor. If this or that device has a self.diagnosis system, all errors are given in the instructions for its operation.

Common breakdowns of ovens Ariston

In order not to damage the oven even more, do not disassemble and do not open the device yourself. Contact our HotPoint Ariston service center if the following violations arose during operation:

  • At the set level of temperature, the dish is prepared longer than usual, not baked;
  • At the selected temperature, the dish is burned, it is impossible to set the minimum temperature;
  • switches do not work;
  • The oven display does not burn or does not switch the modes;
  • The grill spin does not spin;
  • The dish is baked unevenly.
ariston, electric, oven, reasons

If you need to replace the cracked glass or sealing of the oven door, then our engineers will produce these works at home. In our staff there are masters of the station wagon. They are equally well versed in electrical and mechanical faults of ovens and repairs qualitatively.

Choose us

Despite the external simplicity, the repair of electric wind cabinets is complicated and requires experience. Do not try to repair Ariston yourself.

We strive to ensure that the quality of our services leave customers satisfied. Our service center offers Ariston equipment repair.

  • Diagnosis of electric wind cabinets is carried out for free.
  • The master will examine the device and find out all the damage.
  • To replace, our center uses only certified original spare parts.
  • A guarantee applies to repair work and parts during the year.
  • If you are required to repair complex damage using stationary equipment, we dismantle the built-in wardrobe for free and provide delivery to the HotPoint service center.

Call us and solve questions about the repair of the oven or refrigerator. Tell us about the violations noticed, and the manager will name the preliminary cost of repair work. What are the signs of a malfunction and the master will know which spare parts to take with you. You yourself set a convenient time to visit the repairman. If the call is emergency, then the master will arrive at you within an hour.

Repair of ovens Ariston

Ariston ovens. Italian household appliances, which in the market caused approval among housewives and professional chefs. Are equipped with an automatic system for control over gas leaks, with a sudden extinguishing burner. As a technical product, Ariston ovens is worn and stops working from the smallest breakdowns.

The first sign of a malfunction is the poor quality of baking or disconnecting gas during heating. The time increases with the ignition of the burner, the owner has to hold the handle for more than 10 seconds at a rate of 2-3 seconds. These breakdowns are the first signs of a defect in the GAZ-Control system and the thermostat. To eliminate problems, residents and the region can contact the company “Gazervice” and order diagnostics of the device with the departure of the master at home.

Pay attention to the operating instructions for the oven. In the Assistance section, you will find recommendations for eliminating the malfunctions of the Ariston oven from the manufacturer. Use tips, some problems are repaired without involving third parties and consist in cleaning and degreasing nodes.

Typical fault faults Ariston

Ariston oven breakdown is equipped with a safety device. gas control. The effect of fire destroys the components, the gas lights up, but after releasing the handle is instantly rotten. In this case, repair will be required with the replacement of a thermocouple or electromagnetic valve.

Ten breakdown. tubular electric heater. The malfunction of the heating element consists in the destruction of the case and the increased leakage of electricity on the body of the device. The shutdown of heating is accompanied by flash and cotton, which is a malfunction and requires a replacement.

Do.it.yourself ovens repair

Details: Repair of Ariston ovens with your own hands from a real master for Olenord.com.

Modern ovens break quite rarely, but problems in their work are not excluded. The difficulty is that the design and all its elements do not provide for extraneous intervention. Repair of ovens at home is usually carried out by replacing components and conducts it in most cases an experienced master. However, in some cases, breakdowns can be eliminated independently.

If you decide to try to repair the oven with your own hands, then you should know situations when this should not be done. Definitely do not need to open the body if:

  • The electric oven is under warranty;
  • The oven‘s information panel shows that the problem is to break down the complex component;
  • You don’t know anything in electrical engineering.

During the warranty period, all repairs are made for free. With the exception of the following cases:

ariston, electric, oven, reasons
  • There are traces of opening attempts on the design. erased or damaged heads of bolts, screws, removed seals.
  • Insects or rodents penetrated the oven, which caused a short circuit or mechanical damage to the nodes and wires.
  • The connection was made incorrectly, without compliance with the recommendations of the manufacturer.
  • Damage to the electronic components occurred due to changes in voltage parameters, as a result of which it went beyond the critical limits indicated by the manufacturer.

In all cases when the warranty is removed, the repair will have to be paid in full. The same situation is observed with the expiration of the warranty service.

Before grabbing the multimeter, put on gloves and get a set of screwdrivers, it makes sense to check the presence of energy in the oven. It is worth looking for answers to the following questions:

  • Whether food is supplied?
  • Is the power cable okay?
  • Is it good contact between a socket and a fork?
  • Are there any traces of soot, melting on a fork and outlet?
  • Whether a fork or oven was out of order?
  • Is the power wire ideal, are there any fractures, scuffs or melting?

If there are no problems described above, but the oven still does not start, it is worth checking the device for standard malfunctions.

Consider typical malfunctions, methods of their diagnosis and the necessary repair of electric wind cabinets at home. As mentioned above, most work to eliminate problems is to replace the nodes and details.

If the block of electronic control of the oven suddenly fails, then be prepared to give a tidy amount for repairs. In most cases, nothing needs to be done to identify this problem. Modern models of ovens are equipped with a self.testing system: electronics will independently give a signal by output of an error code display.

DIY control module repair is possible only if there is experience and knowledge in electronic technology.

Details are replaced, they can be ordered according to the manufacturer catalog. It is better to call users who prefer to get a baked chicken from the oven, not electronic boards, it is better to call a qualified master.

If this is not possible or the qualifications of service personnel are not trustworthy, you can order a entire control unit. This can be done on the official website of the manufacturer or in a specialized online store. Setting a fee to the place of burnt usually is not difficult.

FIX ARISTON GL4 or GL6 GL2.4 Electric Water Heater No Heat Fix

Most modern models equipped with mechanical regulators do not provide for their disassembly and cleaning. Primary repair consists in removing pollution from the outside, removing contact carts and stripping plate-outputs on the regulator or timer. If this does not help or helps not fully, the part should be replaced.

Some old models allow cleaning mechanical regulators, after which the latter work perfectly, without complaints. Service must be carried out using non-aggressive solvents, for example, white spirit or a weak solution of ammonia. Cleaning oxides from contact groups should be a very small skin, special primers are used to eliminate traces of corrosion.

This is a detail that is often changed, including when the gas oven repair is repaired. Interference in the design of the device is not provided for. The element is replaced entirely.

Fans of blowing and grill over time cease to create a high.quality air flow. If the engine works, then the impeller should be cleaned. Dust constantly accumulates on it, while on blowing fans. fat and oil.

After a certain service life, it is necessary to disassemble the oven and lubricate the engine, if this is provided by its design.

In the case of the extinguisher failure, rewinding or other repair is simply unprofitable. the node is replaced entirely. Similarly act with the grill engine. It is placed in a non.dissimilar case with the gearbox.

The heating elements of the oven constantly work in critical mode. Determine whether the heater works is quite simple. To do this, turn on the oven for the corresponding heating mode and check the temperature by touching the hand in the kitchen mittens. The method works, however, for a more accurate result, it is better to use a pyrometer. The device will clearly show the uniformity of heating over the area, indicate the maximum temperature in a given mode. This will diagnose a “burnt” heating element not only completely, but also partially.

Heaters are replaced after disassembling the case, buying the appropriate part is not difficult. A specific marking can be found after removing the heater or according to the reference data of your electric admiration model.

The last three elements that change without doubt and fluctuations are a backlight lamp, heat.subject and sensory film panel. All these parts are not subject to cleaning and repair.

The operation of an emergency mode will be reported to the operation of the oven, and the problems in the operation of the film touch panel are diagnosed by the lack of reaction, the need to exert excess pressure, and random operations. The backlight lamp can be replaced independently, but to install new thermal guide or film sensor, it is better to contact the master.

Ten breakdown

The heating elements of the oven constantly work in critical mode. Determine whether the heater works is quite simple. To do this, turn on the oven for the corresponding heating mode and check the temperature by touching the hand in the kitchen mittens. The method works, however, for a more accurate result, it is better to use a pyrometer. The device will clearly show the uniformity of heating over the area, indicate the maximum temperature in a given mode. This will diagnose a “burnt” heating element not only completely, but also partially.

Heaters are replaced after disassembling the case, buying the appropriate part is not difficult. A specific marking can be found after removing the heater or according to the reference data of your electric admiration model.

The last three elements that change without doubt and fluctuations are a backlight lamp, heat.subject and sensory film panel. All these parts are not subject to cleaning and repair.

The operation of an emergency mode will be reported to the operation of the oven, and the problems in the operation of the film touch panel are diagnosed by the lack of reaction, the need to exert excess pressure, and random operations. The backlight lamp can be replaced independently, but to install new thermal guide or film sensor, it is better to contact the master.

| Denial of responsibility | Contacts |RSS