Bosch dishwasher malfunction and how to fix it

Dishwasher error codes (Bosch)

Nowadays, Bosch has already made quite a few models of dishwashers with different technological platforms, with different control modules, different types of control panels (user interface).

For the models of the Bosch dishwasher with a display, error codes are generally standardized, but in the previous era, when errors were displayed by indicators (LEDs), things were much more complicated. On machines without displays, there was basically no concept of an error code: there the problem occurred corresponded to a certain combination of lit or blinking indicators. And although the error codes were always the same, they were displayed in countless variations.

In this article we will give examples of the many options for Bosch dishwasher control panels and a description of how error codes were displayed and how to get them through the service tests.

In order not to repeat description of the same error codes, they will be given in full only in the first table of codes for washing machines with display, and all following ones will refer to it, thankfully, set of codes of modern Bosch dishwashers is wide enough to cover all earlier variants.

Dishwasher repair with your own hands

As you have understood, frequent causes of breakdowns are clogs or improper connection. Consider how to perform the repair yourself, without the help of a master.

Getting ready for disassembly

In a Bosch dishwasher, as in other brands, all of the most important parts are at the bottom of the machine. At first glance, it seems that there is nothing complicated about turning the machine upside down, removing the pan and getting access to everything that is required. In fact, in practice, everything looks a little bit more complicated, but about that a little later, first preparations.

In any case, preparation. is the basis of all work, about half of all failures. is the fruit of poorly prepared workplace, tools and materials, as well as the lack of necessary information. To avoid getting into trouble let’s begin preparation of the workplace. Naturally, few people have a full-fledged workshop at home, if you have one. good, no. also not a problem. Do the following.

  • Slide the Bosch, Siemens (or other brand) dishwasher out of the niche in the kitchen unit, then turn off the water supply and unplug the power cord.
  • Disconnect the inlet hose as well as the drain hose.
  • Spread some cellophane on a comfortable place, put some rags on top and place the dishwasher on top of them.

Note! Some people find it easier to disassemble a Bosch dishwasher in the bathroom so that the water draining out of the machine doesn’t flood the floor. If you have a spacious bathroom you can try this Focus.

“The dishwasher is ready for disassembly. Now the tools are ready. Note at once. the dishwasher can be disassembled practically with bare hands, the maximum we need is this:

bosch, dishwasher, malfunction

For realization of repair other tool, for example a multimeter, tweezers, a soldering iron, side-cutters, adjustable wrench, can be required also, but it already a separate story for the separate article.

E25 Bosch Dishwasher Error Code Quick Fix

Disassembly steps

After disconnecting the hoses from the housing, remove any residual water from the chamber. it may remain in the tray. Open the door and remove all appliances from the chamber. Pull out the baskets and racks at the same time.

See also  Xiaomi Mi electric kettle review

Do I have to take the dishes out right away after washing them?? Wait about 10 minutes for it to cool down.

bosch, dishwasher, malfunction

The principle of disassembly of Electrolux, Beko and other dishwashers is basically the same. Only a few details may be different.

  • Remove the decorative panel under the door. To do this, unfasten the catches, unscrew the screws that hold the metal plate behind the panel. Remove the heat insulating layer. The disassembly diagram will help you.
  • Open the door. On the inside unscrew the screws around the perimeter to remove the control panel and then the circuit board. Close the door and carefully remove the top panel, disconnecting the black wire along the way. Now you need to remove the control box and the controller.
  • To remove the module, disconnect the wiring harness. It is desirable to take a picture of their location, to make it easier to assemble later.
  • If your model (“Bosch”, “Siemens”, “Indesit,” “Ariston”) has a drying system, it must also be disassembled. Unscrew the door from the bracket. Disconnect wiring. Disconnect the air duct, twist the inner flap counterclockwise and remove the detergent dispenser. See illustration below.
  • It is time to remove the door. Remove the spring by pulling it up and removing the hook from the hole. Pull up the door and remove it from its hinges.
  • Inside the hopper, remove all sprays. There can be one to four of them. To do this, just press their latches and remove them from the seat.
  • Unscrew the drain filter in the sump. There may be water behind it. Scoop it out with a sponge.
  • Unscrew the bolts around the filter seat. They fasten the circulation unit. Remove the pump flap by pulling it to the side and toward you. Inspect the impeller.
  • For your convenience, turn the oven upside down or place it “on its back”. Now you can remove the pan.
  • Remove the mounting screws or unfasten the latches. Before opening the drip tray, disconnect the float sensor that is attached to it. Disconnect the sensor wiring, unscrew the bolt and remove the part.
  • The inlet valve is also secured to the base. Remove it by unscrewing the fasteners.
  • There are many parts attached to the circulation pump. On the side you will find the drain pump. Remove the screws and undo the latch. Turn the pump counterclockwise, set it aside.

Using the information from our article, you will be able to check and replace any part with your own hands. Good luck!

The dishwasher doesn’t turn on

You have plugged in the machine, pressed the “Start” button, but nothing happens? No light on the panel, no buzzer sounds. What you need to check:

  • Power cord. Sometimes it kinks if it is pressed against the dishwasher when you move it. If you notice damage to the insulation, do not do homemade twists. Such an approach can cause a fire. Replace the cord right away.
  • Plug. Melting and underburning indicates failure. Reinstall the defective component.
  • The socket. To check if it is working, connect another appliance. Is working? Then the outlet is serviceable.

It is worth checking the surge protector (capacitor). Located near the engine. Visual inspection should be alert for bloating and browning. Part to be replaced. You can buy it inexpensively in the online store.

Bosch dishwasher repair maintenance (vids and slides) on water inlet SGS45M12EX/35

Electronics and control box problems should be left to the handyman. Accurate diagnostics should be carried out with a multimeter.

Trouble in the water intake and drain

In this type of failure, simple negligence must be ruled out. So, it’s worth checking:

  • Whether the shutoff valve is open. It may have been accidentally overlapped.
  • Is the inlet hose correctly positioned? If it is kinked or pinched by a foreign object, no water will flow.

When installing a hose with the Aquastop protection, you need to watch it work. When the system trips, the absorbent becomes saturated with moisture and blocks the passage. This is a one-time protection, so you have to change the hose completely.

See also  How to build a dishwasher into a kitchen knoxhult

Bosch Dishwasher Not Draining Properly. How to Fix

It’s important to service the dishwasher at least once every 1 to 2 weeks.

Maintenance involves cleaning debris from the system:

  • Flush it out of the clog.
  • Check the operation of the inlet valve. Inspect its orifices. The passage is clogged with debris, making it difficult for the diaphragm to move. It does not open and no liquid is coming in.

The pump is not necessarily broken if there is a problem with the drain. Check the parts for clogs:

  • Unscrew and clean the part.
  • Check the pump impeller. Pieces of food getting through the filter can block its rotation.
  • Remove water from orifice.
  • Remove the cover by pulling it toward you.
  • Wear gloves, remove blockage.

Bosch dishwasher malfunctions

The operation of a Bosch dishwashing machine can be accompanied by malfunctions. The machine self-diagnostic system displays an error code on the display. this allows the user to check the cause of the malfunction.

What are the most common breakdowns in a Bosch dishwasher?? Is it possible to carry out repair with your own hands?? You can find the answers in this article.

Bosch automatic dishwasher error codes are collected and described in detail in a separate article.

How to repair your dishwasher yourself?

There are two particular malfunctions for Bosch Dishwasher models. They are water-related. Often users complain about the E15 code appearing on the display. This means that the “Aquastop” protection has tripped. But it’s not always a leak. Proceed as follows:

  • Swing the cabinet back and look in the drip tray.
  • If there really is water accumulated there. drain it.
  • Return the float switch to the “OFF” position.

Sometimes the cause of the malfunction is the incorrect placement of the fill hose gasket. Maybe it was misaligned during installation. Therefore, follow the user manual for connection.

The dishwasher won’t turn on

You plugged in the machine, pressed the “Power on” button, but nothing happens? The bulbs on the panel do not light up, you do not hear any beeps. What you need to check:

  • Power cord. Sometimes it kinks if it is pressed by the dishwasher’s body during repositioning. If you notice that the insulation is damaged, do not make any unauthorized ties. Such an approach could cause a fire. Replace the cord immediately.
  • Plug. Melted or burned surfaces indicate a malfunction. Replace with defective unit.
  • The socket. To check if it’s working, plug in another appliance. Working? That means the outlet is in good working order.

It is worth checking the line filter (capacitor). It is located near the motor. Visual inspection should be alert for bloating and browning. The part should be replaced. You can buy it inexpensively in the online store.

Leave the problems with electronics and control unit to the master. Here you need an accurate diagnosis, which is carried out with a multimeter.

Water intake and drain malfunction

In such a malfunction, simple inattention should be ruled out. So, it is worth checking:

  • Whether the stop valve is open. It may have been blocked by accident.
  • Check that the water inlet hose is properly seated. If it is kinked or pinched by an object, no water will flow.

If you install a hose with Aquastop protection, you need to monitor its operation. When the system is triggered, the absorbent is saturated and blocks the passage. This is a one time protection, so the hose must be completely replaced.

It’s important to service the dishwasher at least once every 1-2 weeks.

Maintenance involves cleaning debris from the system:

  • Flush it out of the clog.
  • Check the operation of the inlet valve. Inspect its holes. Debris clogs the passage, making it difficult for the diaphragm to move. It does not open and no liquid is dispensed.

If there are problems with the drain, the pump is not necessarily broken. Check the parts for clogs:

  • Unscrew and clean the part.
  • Check the pump impeller. Pieces of food, penetrating through the filter, can block its rotation.
  • Remove water from the opening.
  • Remove the lid by pulling.
  • Wear gloves, remove the clog.
See also  How to install an ikea dishwasher in an ikea kitchen

Bosch dishwasher malfunctions and troubleshooting

Bosch dishwashers are among the highest quality on the market. However, even such a reliable appliance, despite its premium quality, can break down, making it necessary to carry out repair work. A distinctive feature of the German brand technology is that it is able to detect most problems on its own, displaying an error code.

Causes of dishwasher malfunction.

No dishwasher brand is immune to serious malfunctions. Even such giants as Bosch break down. What to say about other manufacturers such as Hotpoint Ariston, Ardo, Electrolux, Hansa. All of them are subject to wear and tear of the main parts, lack of water supply to the dishwasher and its drain.

  • Hard and super-hard water made up of mineral salts and other particles.
  • Regular power outages.
  • Use of inappropriate chemicals for maintenance of the appliance.
  • Manufacturing irregularities that cause the devices to malfunction.
  • Violation of the rules and norms of dishwasher’s operation.
  • Trouble with connection or quality of socket.
  • Improper installation and connection.
  • The use of non-original spare parts in the previous repair.
  • Failure to close the door tightly also prevents the dishwasher from starting.
  • Incorrectly loaded dishes can affect the quality of washing.

In most cases, the dishwasher is not working as it should, not because of the stripe of the most important units, but for quite trivial reasons: clogging of nozzles and filters, scale build-up in the valves, clogging of the machine.

For troubleshooting your own technically complex dishwasher, the appliance’s instruction manual will help you. This approach is relevant for machines with automatic fault detection and its indication on the display. For owners of less advanced dishwashers, the manual is of little help, but this text, which identifies the main faults of Bosch dishwashers and their remedies, will definitely help. Users of dishwashers of other brands will also learn more about possible malfunctions.

Bosch dishwasher: troubleshooting

Bosch is a major player in the domestic appliance industry, with a significant share of the dishwasher market. They tend to be very reliable, but unfortunately, sometimes something can go wrong and you’ll need to fix the breakdown by having your Bosch machine repaired.

The good news is that because these dishwashers are so popular, service, parts and repairs are widely available. These appliances are actually quite simple, so most of the problems you may encounter often require fairly simple repairs that you can do with your own hands.

Here are some tips on some of the most common dishwasher problems you may encounter. For more advice on Bosch dishwashers, check out our other articles on the subject.

Bosch Dishwasher Repair

Despite the high quality of German workmanship, Bosch dishwashers are just as prone to malfunction as any other. There is no such thing as a perfect appliance. a dishwasher is a complicated electrical device, whose operation depends on many factors. So the dishwasher can break down at some point. How to repair Bosch dishwashers by yourself, what breakages happen most often and let’s talk about it.

What to do if the dishwasher does not work repair with your own hands

The dishwasher is not as complex equipment as it seems at first glance. Most breakdowns are caused by simple reasons. You do not need high qualification or special knowledge to repair them. If the technique is no longer under warranty, it is quite possible to try to repair with your own hands. The main faults of dishwashers and ways to fix them, and describe further. In most cases, the causes and methods of elimination do not depend on the brand of the machine. Bosch, Siemens, Sumsung, Electrolux, Miele, Indesit, Candy, Beko does not matter. The repair is the same. The disassembly process, fastening, etc. may be different.д. But the basic principles of troubleshooting of dishwashers are the same.

| Denial of responsibility | Contacts |RSS