Electric Fireplaces Dimple with Steam goes out

Electric fireplaces

You want to add something unusual to your interior? You want to make your home just a little bit cozier? Do you want your guests to feel comfortable and relaxed, or are you just an extraordinary person and you lack something fabulous in your usual apartment??

Online store of electric fireplaces will help you make the right choice. But first, let’s understand what an electric fireplace is and how it differs from a conventional wood-burning fireplace?

The first and most important difference is that you do not have to redo your interior to install a chimney, constantly clean it and look for firewood. This option is too troublesome even for the most experienced fireplace lovers, in a modern apartment it is almost impossible to do. But electric fireplaces are very popular nowadays because they are very simple and easy to use.

Electric fireplace. This heating device with a simulation of real fire, which is absolutely easy and simple to install, turn on and work almost silently. An electric fireplace has a low weight, depending on the model and equipment. You can control the electric fireplace with the remote control, without getting up from the couch, enjoying the game of flames in a comfortable home environment. You won’t have to worry about wood and fuel, and you can adjust the brightness of the fire.

Also, in addition to the technical qualities of electric fireplaces differ in design. The range is so huge that anyone can find an electric fireplace to their liking. Electric Fireplace. it is not just a heater, such as a fan heater or radiator. In contrast to them, the electric fireplace has a picture of a live fire and a pleasant shell in the form of a portal, which can be chosen for absolutely any interior. Capacity of an electric fireplace can reach up to 2 kW, and it is enough to heat almost 25 sq.m.m of living space.

How the electric fireplace with a flame effect is set up

Ordinary electric heaters are well known to everybody, but an electric fireplace with a flame effect is quite another matter. The flame here is cold, it is created by steam, combined with modern imaging technology. The result is the effect of a real fire with the smoke that comes from the wood “burning” in the firebox.

Dimplex OptiMyst Open Hearth Electric Fireplace Log Insert | DLGM29

Yesterday, the best models simulated fire, showing it on the screen, but whether it creates a real effect of the presence of fire in the fireplace? It doesn’t. If you look at the screen from the side, the artificiality of the fire will be evident, and the whole idyll will be broken.

Otherwise is the case with fireplaces, where the illusion of a flame is created just by a steam generator with the right illumination of halogen or LED lamps. Such a fireplace will provide realistic and voluminous flames with dispersing smoke. It is about such fireplaces, about their device, and we will talk in this article.

Of course, the function of a fireplace with a flame effect is primarily decorative. But some models even heat. Built-in electronics simulates very accurately dancing on the wood fire, maintain the correct temperature regime to the spectacle was truly a calming, that the room came to the comfort.

It is very convenient to control the intensity of the flame, the backlight, the heating mode. can be controlled by remote control. Audible sounds such as the crackling of logs or the sound of a fire dancing on the logs are always present. Such a fireplace will certainly create a cozy, if necessary, warmth, if it is winter, or allow you to enjoy the view of the burning logs in the summer.

Today electric fireplaces with steam generators give the most realistic effect of all presented on the market electric fireplaces.

The main function of steam here is to reproduce the aesthetic effect of burning logs. The steam in the fireplace does not work like in a humidifier, because its amount is dosed precisely enough to get the most realistic picture, so that the overall humidity in the room is not affected by such a fireplace.

Pour the water, plug the device into the socket, and the fireplace is working. It can be a free-standing or built-ins fireplace.

Steam generator has two compartments, the first compartment contains the steam generator itself, the second is the water tank. If the water runs out, the steam generator sensor triggers and the system shuts down. The steam is cold and does not burn, while the flame effect spreads across the entire width of the firebox where the decorative logs are stacked. One full refill of water is sufficient for more than a day of continuous operation.

There is a valve at the bottom of the steam generator tank, through which water is dosed. This regulates the intensity of the steam flow to the logs. Through a filter, the lamps light up the steam puffs from below, giving the fire its characteristic tint and imitating the natural movement of the flames.

See also  Warm steam in a humidifier why

The steam rises and passes through the logs and looks like real flames, i.e. like a real fire inside the stove. Since the lighting is stronger on the bottom side than on the top, the upper steam puffs are poorly lit, creating the illusion of smoke.

As soon as the fireplace is switched on, the steam generator is the first to start, followed by a dosage of water, and after a short time the steam appears. So the clouds of steam begin to rise through a special diffuser, and the lighting completes the creation of the image of a real fire.

The more powerful the lamps and the more of them, the brighter the flame is illuminated. And even in daylight, with a certain setting the flame will be bright enough, it will be visible. So you can use this kind of fireplace for aesthetic pleasure in the dark or in daylight. When the intensity of the steam is adjusted, the picture changes smoothly and the illusion of real fire is not disturbed.

So, the main elements of a steam fireplace are a firebox with logs, a steam generator and halogen or LED lamps.

These elements are installed each in its place. In the plastic reservoir of the steam generator steam is formed, which will become a flame with smoke. Next to the reservoir is a board for fixing the lamps, it is located under the logs. The reservoir is secured by swivel latches. Water flows automatically from the storage tank to the steam generator via a valve.

The steam generator is a chromium-plated cylinder with a wire and is inserted into a drilled hole on the side of the steam tray. The function of the steam generator is to turn the water into a mist through high frequency membrane vibrations.

The lamps for illuminating the steam are equipped with light filters so that the puffs shimmer in different colors from red to orange to yellow. The use of halogen lamps has the advantage that the heat radiated by the lamps heats the steam particles causing them to move constantly and an extremely natural illusion of a flame is created across the entire width of the firebox.

The steam is stirred by a diffuser located on the plastic tank and secured with snap fasteners. Thanks to the diffuser, the steam is not going up in a straight stream, it is mixed all the time, and the movement of “tongues of flame” becomes chaotic and even more natural.

The more intensely the flame is set, the faster the water is consumed, and here the volume of the storage tank, which differs from model to model, plays an important role. On average, an electric fireplace with a fully filled reservoir lasts for 6 to 12 hours, but some models have a reservoir that lasts for about 1.5 days.

Decorative logs are plastic, and the plastic here is not the usual. it scatters light. For the fire to flicker between the wood, really burst between them, the logs are stacked with distance, and in some places are transparent. The lamps continuously illuminate from below while the fireplace is in operation.

The fireplace hums or runs too loudly

Only those parts of the fireplace that are movable can make loud noises. Often the fireplace is noisy because the bearing inside the electric motor is clogged. In order to insure the bearing against unscheduled replacement, it is necessary to regularly remove dust from all moving elements of the electric fireplace with a vacuum cleaner. It is helpful to lubricate the bearings with grease or oil from time to time.

Sometimes the cause of the noise lies in the heat fan, or rather in the impeller. Often the impeller that creates the illusion of fire hums. it rotates under the influence of thermals. The backlight bulb has a high temperature. this is why the needle bar bracket (with which the impeller rotates) can begin to deform.

Due to the change in direction of rotation of the impeller, it can catch the elements that are in close proximity. In order to eliminate this defect it is necessary to restore the initial position of the needle, in addition you need to replace the lamp with a less powerful one.

Another cause of extraneous noise during operation of the chimney may lurk in the transformer of the ultrasonic generator. If the image is generated with steam, the transformer of the ultrasonic generator may vibrate during operation. To solve the problem you need to mount the transformer with rubber inserts to stop the noise during fireplace operation.

Repair of Dimplex heaters

Repair of computers and the Moscow region. Repair of PC of any complexity on the day of treatment. from 500r, diagnosis 0 Warranty from 1 year under the contract.

MASTER-TV Appliance Repair Shop has been open since 2003. Quality repair with warranty at affordable in the shortest possible time

Why customers choose us? Free diagnostic. Guarantee of services. Qualified specialists. Professional equipment. Original spare parts.Service Center “BudetSdelano”. Show text Show text

Electric Fireplace Repair

Varieties and types of electric fireplaces a huge number, they can differ in shape, power, body material and more. But by design they are not much different.

See also  What is better cast iron batteries or bimetallic

We are talking about fireplaces, where the heating element is a nichrome wire, twisted into a spiral of a certain length.

The cross-section of the wire can vary, it ranges from 0.4 to 0.8 mm?, but still the most “popular” wire is 0.6 mm? To ensure that the coils do not connect to each other during operation and no short circuit occurs, a heat-resistant frame is used to hold them in place.

It can be a mica plate or a ceramic tube with grooves for laying the coils.

This is the kind of fireplace with a ceramic tube, we will talk about in this article.

They are lightweight, mobile and quite effective. Like all high-current equipment, fireplaces operate in an extreme mode and periodically require maintenance or repair.

Below, will be described the main breakdown and repair of electric spiral fireplace at 1000 watts. This model of electric device was released in the seventies, but it is successfully used even now, giving a head start to modern devices.

This model’s success is simple. it’s good quality, a margin of safety, and a reliable housing material. Interestingly, of the three identical fireplaces that came into the shop for repair, the problem of their inoperability was the same.

So, here is this device in all its glory.

It has a heating element in the form of a ceramic tube with a nichrome wire wrapped around it. On top of the nichrome tube is a quartz glass. It serves to prevent debris on the coil and not to dry out the air in the room, as open nichrome burns oxygen.

The case is made of metal, in the place of heat output a grid is made and on the sides there are L-shaped legs screwed with thumbscrews.

On one side, there is a junction box, in which there is a mounting terminal. The nichrome from the coil goes through the side opening in the housing and is connected to the terminal.

To prevent short-circuiting the nichrome on the body, ceramic inserts are put on the terminals.

On the opposite side of the coil, the wire goes in a glass tube and also sits on the terminal block.

The first thing to do is to remove the lid of the box. This is done with a straight screwdriver.

When the cover is removed, underneath you can see the terminal block and the conductors that go with it.

There are mica gaskets in the cover itself, protecting the current-carrying circuits from accidental contact with the case.

These gaskets should be sure to stay in their places, when you install the cover in place.

On examination you can see that the ends of the power cable are burnt, and one has fallen off completely.

This is most likely due to poor contact on the terminal, due to heat and loosen the clamp nut.

Remove the burnt end of the wire to the side, and spray the corroded connection with VD-40. This fluid will allow the clamp nut to be unscrewed over time.

While the solution is doing its job, check the continuity of the coil with a wire gauge.

When connecting the device directly to the studs. the circuit does not show. But when one (lower) probe was connected directly to the wire, the indicator showed a circuit.

It became clear that for some reason in the place where the seat ring was formed, there was a breakage of the nichrome wire. Perhaps when you clamp it with a nut, it was already partially damaged, well, over time. from the shaking or overheating of the thinned place. the nichrome fracture occurred.

Repair of electric fireplace

There are a huge number of varieties and types of electric fireplaces, they can differ in shape, power, body material and much more. But by design they have few differences.

We are talking about fireplaces, where the heating element is a nichrome wire, twisted into a spiral of a certain length.

The cross section of the wire can vary, it ranges from 0.4 to 0.8 mm?, But still the most “popular” wire is 0,6 mm? To coils do not connect with each other during operation and did not cause a short circuit, for their fixation a heat-resistant frame is used.

It can be a mica plate or a ceramic tube with grooves for laying the coils.

It is about this kind of fireplace with a ceramic tube, we will talk about in this article.

They are lightweight, mobile and quite efficient. Like all high-current equipment, the fireplaces operate in an extreme mode and require periodic maintenance or repair.

Below, will be described the basic breakdown and repair of the spiral electric fireplace on the power of 1000 watts. This model of electric device was released back in the seventies, but it is successfully used even now, giving a head start to modern devices.

Such success of this model is simple. it is good quality, safety margin and reliable body material. Interestingly, of the three identical fireplaces that came into the shop for repair, the problem of their inoperability was the same.

So, here is this device in all its glory.

Dimplex Danville. getting the best from your Opti-myst electric fire

See also  Braun carestyle 3 steam generator how to clean

It has a heating element in the form of a ceramic tube on which a nichrome wire is wound. On top of the nichrome tube, there is quartz glass. It serves to prevent debris from getting on the coil and not to dry out the air in the room, as open nichrome burns oxygen.

The body is made of metal, in the place of the heat outlet there is a grid and on the sides there are L-shaped legs screwed down with wing nuts.

On one side, there is a junction box, in which there is a mounting terminal. The nichrome from the coil passes through the side hole in the housing and connects to the terminal.

To prevent short-circuiting the nichrome on the body, ceramic inserts are put on the leads.

electric, fireplaces, dimple, steam

On the opposite side of the coil, the wire passes through a glass tube and also sits on the terminal block.

The first thing to do is to remove the lid of the box. This is done with a straight screwdriver.

When the cover is removed, you can see underneath the cover the terminal block and the conductors that go with it.

There are mica gaskets in the cover itself to protect the current-carrying circuits from accidental contact with the case.

These gaskets must be left in place when replacing the cover.

On examining it is possible to see that the ends of the power cable are burned out, and one has fallen off at all.

It is most likely due to poor contact at the terminal, caused by heating and loosening of the nut’s clamp.

Let’s take the burnt out wire end aside and spray the corroded connection with VD-40 spray. This fluid will allow the clamp nut to be unscrewed over time.

While the solution is doing its job, check the continuity of the coil with a wire-caller.

When connecting the device directly to the studs. the circuit is not shown. But when one (lower) probe was connected directly to the wire, the indicator showed a chain.

It became clear that for some reason there was a break in the nichrome wire in the place of the seat ring formation. It is possible that when you clamp it with the nut it was already partially damaged, and in time. from shaking or overheating of the thinned place. the nichrome was fractured.

General problems

In case of any malfunction it is recommended to contact the service center immediately. Self-repair of the device is difficult, because such parts as the control system, the ultrasonic generator or the LED panel are hardly repairable. But most malfunctions can be repaired by yourself.

New on the market is a fireplace with a steam generator, which has gained its place under the sun among other models. It works like this: a small ultrasonic steam generator. the cube with the side of 5 cm (there are different models) is placed in water and produces steam, i.e. by means of ultrasound it breaks water into very small drops.

The steam generator in an electric fireplace is a consumable part and sometimes it needs to be replaced. And, we want to emphasize that the steam generator for the fireplace aliexpress are not suitable for these fireplaces, because they have other sizes and a different power watts.

electric, fireplaces, dimple, steam

The droplets are affected by halogen lamps, which, when heated, cause the water vapor to rise almost chaotically, creating the illusion of flame. The cause of humming electric fireplace. a steam generator for an electric fireplace. A vibrating transformer is responsible for generating the steam. During operation, the transformer is in contact with the case and makes an unpleasant noise. You can solve this problem by putting rubber washers under the transformer.

Limescale and scale build-up in the steam lines leads to premature failure of the steam generator. Scale builds up due to hard tap water. Use distilled or filtered water to prevent damage, but preferably the former.

To prevent damage to the entire system, always keep a close eye on the unit and replace all necessary consumable parts in good time.

Info

☎ 7 (495) 150-52-58☎ 7 (915) 000-8-111 info@dimplex-electrokamin.Monday to Friday / 9:00 to 21:00, Saturday to Sunday / 9:00 to 18:00

© 2011-2021 dimplex-electrokamin.ru. online store electric fireplace Dimplex. Dealer Certificate DIMPLEX.

Dear visitors to our website: Please note that all the information (product descriptions, specifications and prices) on dimplex-electrokamin website.Quality of our service is for information purposes only, and under no circumstances is this a public offer (information can be changed at any time without notice), as defined by the provisions of Articles 435 and 437 (2) of the Civil Code User Agreement.

Your order, including price and availability, will be confirmed by our manager by phone call to the number you indicated when placing the order.

Using material from the dimplex-electrokamin website.It is forbidden to use the dishwasher rinse aid in whole or in part without permission. Thank you for your understanding.

| Denial of responsibility | Contacts |RSS