Floor standing gas boiler with electronic control

best heating gas boilers for your home

The advantages of installing a gas boiler for heating in Russia are obvious: the gas supply is more stable, it will not cut off suddenly, and gas is cheaper than electricity. What we need from a good gas boiler? In order to keep the house warm, the appliance must be safe and last for a long time.

The temperature readings of all models are about the same. All heating boilers meet safety standards, but the more expensive models have a complex multistage self-diagnostics system, effective protection automation. Reliability and service life is defined by the quality of parts and assembly (and of course it is necessary to follow the rules of use)!). We have studied the opinions of experts and buyers reviews and selected the best models of gas boilers that combine reliability, safety and efficiency.

Let’s find out what manufacturers of gas boilers deserve our attention first of all.

Gas boilers with electronic control in Kiev Instructions online store Vencon: how to choose, buy, use

We offer to buy Gas boilers with electronic control for the price from 9 499 UAH. in Ukraine

Gas boilers with electronic control Data on 07.02.2022
Quantity of goods 949
️ Number of manufacturers 31
Minimum price 9 499 UAH
️ Maximum price 1 462 189 грн
Average price 78 604 UAH

In vencon price list.Gas boilers with electronic control can be purchased favorably with delivery in Ukraine. When buying Gas boilers with electronic control in our store a variety of payment methods, purchase on credit and a lot of actions and discounts are available for each buyer.

Gas boiler with electronic control is a highly efficient heating system. Such boilers are installed in private houses and cottages. If you want to buy a gas boiler for installation in an apartment building, ask your local gas supply company.

Gas boilers are used for heating rooms with simultaneous water heating or without it. Single-circuit boiler, working only for heating, installed in those homes where you do not need water heating, t.к. It is performed centrally or you have already installed a boiler.

The boiler is connected to the gas mains, and is controlled by a reliable electronic system. The electronic control unit controls the burner, regulates the gas supply and ensures the shut-down of the unit when the water temperature is reached and blocks the gas supply if any problem is detected.

Gas boilers with electronic control have a number of advantages:

  • A complete electronic control system;
  • accurate temperature measurement and control;
  • The presence of anti-freeze protection functions and self-diagnosis;
  • high energy efficiency;
  • boilers are equipped with reliable fuses.

All models presented on the VENCON web-site are characterized by excellent build quality, high efficiency and durability. The reliability of the units is confirmed by appropriate certificates.

Floor standing gas boiler with electronic control

Gas boiler for floor (stationary) placement in the furnace room. Rated heat output of the boiler. 50 kW, actual. 48 kW. KOLVI 50 CET boiler is able to provide large square living and industrial premises with heat and hot water heating. Boiler is energy dependent, i.e. requires uninterrupted power supply. Boiler chimney. forced ventilation, through one of the outer walls of the room, where the boiler is located.

Boiler specifications:

Rated heat output, kW 48
Heat output regulation, kw 25-48
EFFICIENCY, % 92
Gas consumption, m.cubic meters per hour 1,6-5,58
Nominal gas pressure, Pa 2000
Temperature of combustion products, C 130
Rated power capacity, W 60
Water pressure in the heating system, bar 0,5-3
Overall dimensions, mm, GxHxV 751х630х1094
Gas connection diameter, inch ½
Diameter of connection to heating system, inch 2
Flue gas outlet diameter, mm 164 (80. turbo attachment)
Boiler weight, kg 174 (179. with turbo attachment)

The main overall dimensions of the boiler:

Т1 Infeed tube
Т2 Return nozzle
Г1 Gas connection

Boiler functional characteristics:

Floor standing gas boiler “KOLVI” 50 SET is a multifunctional heating appliance. Its basis is a steel heat exchanger, which is made of boiler steel and sections of steel straight-seam flue pipes arranged vertically. Like the whole line of KOLVI boilers, the 50 CET has stainless steel turbulators, not subject to rancor, inside the above-mentioned pipes. The body of the boiler is insulated with foil-coated mineral wool. Boiler ignition and flame control are automatic by means of special electrodes (ignition electrode, and ionization electrode). Boiler burners. Micro flare, high quality stainless steel.

Standing pilots, combination gas valves, Thermocouples.

The boiler is equipped with a special device for forced flue. turbo attachment. Use of the turbo attachment allows equipping of the furnace room without a chimney construction. Gas valve of boiler “KOLVI” 50 SET. modulating, correcting the required boiler output of 25 to 48 kW. Availability of modulation reduces the clocking (number of ignition cycles / attenuation of the main burners), which positively affects the service life of the ignition electrodes. Electronic control unit shows a clear indication of the current mode of the boiler, using the buttons set the detailed temperature of the coolant. The control unit can monitor the operation of external water heaters, ensuring the principle of DHW priority. Boiler operation with a water tank heater can provide the user with a large volume of hot water for a short period of time. When using the boiler and water heater together it is necessary to match the boiler output and boiler coil. Control unit of boiler “KOLVI” 50 CET is compatible with mechanical and electronic external thermoregulators, sensor of equithermal control of the street temperature. Boiler group 50 CET can work in cascade, t.there is a certain number of heaters is switched on as the heat load changes. Cascade operation ensures achievement of the same operating time of each of the boilers in the group during the heating season. If cascade control is required, a special interface panel is installed on the KOLVI 50 CET boiler by factory order.

Floor standing gas boiler Acv Alfa Comfort E 30 v15. 22 kW cast iron with electronic control

The company carries out return and exchange of this goods in accordance with the requirements of the legislation.

Returns terms

Returns are possible within 7 days after receipt (for goods of proper quality).

Return delivery of the goods is carried out at the expense of the buyer.

De Dietrich Floor Standing Condensing Boilers

Exchange and return of goods of appropriate quality: Goods must not have traces of operation, its packaging, trade dress, consumer properties, seals, factory labels, and all documents received from the seller (payment documents, warranty card, instruction manual) must be preserved. Return of the goods of proper quality is possible only within two weeks from the date of purchase. Goods of proper quality cannot be exchanged or returned if they are included in the list of goods that cannot be returned or exchanged, according to the Law on Protection of Consumer Rights. You can also exchange purchased goods of proper quality for a similar product of the same value or for a different model, paying the difference in price. For presentation of requirements about replacement or return of the goods got in the Internet-shop You should call by phone specified on a site.

How to Install a Combination Boiler/Water Heater | Ask This Old House

Heating cast iron hot water boiler ACV Alfa Comfort E 30 v15 capacity of 22 kW 04531511 with electronic control is designed for heating individual residences and domestic purpose buildings. Applicable for open or closed heating systems with an atmospheric or membrane expansion tank, with natural or forced circulation of the coolant, with a maximum temperature of water in the heating system up to 95 ° C and a maximum operating pressure not exceeding 3 bar. Water is used as the coolant in this boiler.

Alfa Comfort Water Heater E 30 is equipped with a single-stage atmospheric burner and works with natural gas within the pressure range before the boiler of 0.8. 3.0 kPa. The gas valve is automatically controlled. Mode “soft start” provides a smooth increase in gas supply to the burner at its ignition, which significantly improves the characteristics of ignition, reduce temperature deformation, thereby increasing the reliability and durability of the boiler.

The heat exchanger of the boiler is made of cast iron using modern technologies, allowing a high efficiency, and at the same time is practically not subject to corrosion, compared to heat exchangers of other materials. The crystalline structure of gray cast iron ensures uniformity of heat flow, resulting in a longer life of the heater.

On the front panel of the boiler there is a pressure gauge that helps control the water pressure in the boiler heat exchanger, a thermometer that shows the water temperature at the boiler outlet, and a regulation thermostat that automatically maintains the set temperature. The desired boiler outlet water temperature is set from 50 to 90 °C by turning the thermostat knob. Integrated safety devices cause the automatic blocking of gas supply to the burners in case of pilot burner flameout (button “Flameout failure”), in case of exceeding the boiler outlet water temperature of 95°C and in case of chimney draft failure (the respective safety thermostats are located under the removable front panel of the boiler). Boiler can operate in “Winter” and “Summer” modes if there is a hot water boiler in the heating system.

Boiler Alfa Comfort E v15 series is energy-independent and for its operation requires a connection to a domestic power supply network with voltage 220 V and frequency of 50 Hz.

The main features and benefits of the boiler Acv Alfa Comfort E 30 v15:

  • Cast iron heat exchanger with increased heat exchange surface (increased warranty. 5 years!)
  • High efficiency: up to 91,5 %
  • Natural gas operation
  • Single-stage atmospheric burner (automatic gas valve control)
  • Low noise level
  • Electric ignition
  • Soft start mode
  • Convenient control panel
  • Manometer, thermometer, regulation thermostat in the basic package
  • Built-in safety devices
  • Alarm indication
  • Boiler control function with DHW priority
  • External thermostat connection possible
  • Universal use: all heating systems
  • Full equipment for the operation of the boiler
  • Compact size
  • Electric connection 220 V / 50 Hz
  • Reliable design, time-tested
  • Service life: at least 10 years

Floor standing gas boiler with electronic control

Heating cast iron hot water boiler ACV Alfa Comfort E 50 v15 rated at 42 kW with electronic control is designed for heating individual residences and domestic purpose buildings. Applies to open or closed heating systems with atmospheric or membrane expansion tank, with natural or forced circulation of the coolant, with a maximum temperature of water in the heating system up to 95 ° C and a maximum operating pressure of not more than 3 bar. Water is used as the heating medium in this boiler.

Alfa Comfort Water Heater E 50 is equipped with a single-stage atmospheric burner and works on natural gas within the pressure range upstream the boiler 0.8. 3.0 kPa. The gas valve is controlled by automation. Mode “soft start” provides a smooth increase of gas supply to the burner at ignition, which can significantly improve the ignition characteristics, reduce temperature deformation, thereby increasing the reliability and durability of the boiler.

The heat exchanger of the boiler is made of cast iron using modern technologies that allow obtaining high efficiency, while being virtually immune to corrosion compared to heat exchangers made of other materials. The crystalline structure of gray cast iron ensures uniformity of heat flow, resulting in a longer life of the heater.

On the front panel of the boiler there is a pressure gauge that helps control the water pressure in the boiler heat exchanger, a thermometer that shows the water temperature at the boiler outlet, and a regulation thermostat that automatically maintains the set temperature. The desired boiler outlet water temperature is set from 50 to 90 ° C by turning the thermostat knob. Built-in safety devices cause automatic blocking of gas supply to the burners when the pilot burner flame goes out (button “Flame failure”), when the water temperature at the boiler outlet exceeds 95 ° C and in case of chimney draft in the boiler (corresponding safety thermostats are located under the removable front panel of the boiler). In the presence of hot water boiler in the heating system boiler can operate in “Winter” and “Summer” modes.

Boiler Alfa Comfort E v15 series is energy-independent and for its operation requires connection to a domestic power supply network with voltage of 220 V and frequency of 50 Hz.

Main features and advantages of the boiler Acv Alfa Comfort E 50 v15:

  • Cast iron heat exchanger with increased heat transfer surface (increased guarantee. 5 years)!)
  • High efficiency: up to 91,5
  • Natural gas operation
  • One-stage atmospheric burner (automatic gas valve control)
  • Low noise level
  • Electric ignition
  • Soft start” mode
  • Convenient control panel
  • Pressure gauge, thermometer, regulation thermostat in basic version
  • Integrated safety devices
  • Alarm indication
  • Boiler control function with DHW priority
  • External thermostat connection possible
  • Versatile use: all heating systems
  • Full equipment for the operation of the boiler
  • Compact size
  • Connection to the electric network 220 V / 50 Hz
  • Robust and time-tested design
  • Service life: at least 10 years

Boiler with electronic control floor ACV Alfa Comfort E 40 v15 32kW

on order

Home heating is one of the main tasks, which directly affects the degree of comfort and livability of the home as a whole. For its solution many different options have been invented, one of which are floor standing heating boilers. Such devices are divided into several types. These are:

  • Floor standing gas heating boiler,
  • A boiler that operates on wood and other solid fuel,
  • Oil-fired boiler operating on diesel, kerosene or waste oil.

Hercules Solar 26 2 ErP: Gas floor boiler control

All controls are from the control panel of the Immergas Hercules Solar 26 2 ErP floor standing gas boiler. Thanks to the boiler, the boiler is able to deliver 19 l/min for the first 10 minutes and 13 l/min in continuous use.

The main elements of the hydraulic circuit are a stainless steel condensation module, a hydraulic arrow and two circulation pumps for the basic version, which is designed for the high-temperature zone.

The main element of the control panel is a large-format, backlit liquid crystal display, which is one of the hallmarks of premium equipment.

How to choose

The key factors for selection are:

  • Boiler capacity.
  • Type of combustion chamber.
  • Control type.
  • Design of heat exchanger (for forced or natural circulation).

Once you have decided on these parameters, you can select a limited number of suitable models from different manufacturers.

Powerful enough to cover all heat losses of the house or apartment during the toughest frosts. It is obligatory to take into account the surcharge when using an external boiler with indirect heating, focusing on the optimal capacity of the latter. Floor standing single circuit boilers give the enormous power up to 250 kW and more. However, for a private home is more relevant models with a capacity in the range from 10 kW to 45 kW, able to heat the premises with a total area of up to 350 m.

Type of combustion chamber is chosen based on the presence or absence of a normal chimney. If it is not available, then only the option with a closed combustion chamber is left.

floor, standing, boiler, electronic, control

Type of control affects more on the cost of the boiler and the comfort of operation. If you want to adjust the equipment once, and forget about it for a long time and know that the temperature in the house will always be adequate, the choice is clearly in the side of electronic control. If you want to save money and you are not afraid of manual adjustment, the energy-independent boilers with hydrothermal control are just right.

Naturally, and the type of heat exchanger, it all depends on the planned configuration of heating. For natural circulation only boilers with accumulation tank and volumetric heat exchanger are chosen.

| Denial of responsibility | Contacts |RSS