HotPoint Ariston washing machine squeals during. Repair method when it is faulty…

popular faults of Ariston washing machines, the causes and methods of their elimination

The creator of the Ariston brand was the legendary figure and inventor of ordinary household weights Merloni Aristide. He founded his own company back in 1930, after which he managed to redeem several more companies in household appliances. The main of the distributors of electrical appliances was Indezit, which also oversaw Aristide. First of all, washing machines gained their distribution in Europe, after which they began to be delivered in France, Italy, Germany. To date, after the next ransom of the HotPoint plant, Ariston has become washing machines, having its branch in, respectively, we can say that the manufacturer of Ariston today is the branch built in history by the owner of the company to become the official representative of several companies manufactured by washing machines.

  • Advantages and disadvantages of Ariston washing machines
  • Ariston washing machines with vertical and front loading: Differences and features of devices
  • Characteristics and parameters of popular models of washing machines Hotpoint-ariston: review and prices
  • Operating instructions for the washing machine Hotpone-ARISTON
  • Common codes of errors in Ariston washing machines: Conditions
  • Common faults of Ariston washing machines: DIY repair
  • How to replace the heater of the ARISTN washing machine

Features of AM Ariston

To produce practical, reliable, durable cars is the main task of the company. That is why the Italian company Ariston has been holding a leading position in the production of washing machines in the world market for many years.

Differences and advantages

  • The minimum noise level. Due to the special design and accuracy of the location of the mechanisms, the engine works as quietly as possible.
  • Economic energy consumption. Italian engineers took care of the minimum consumption by the technique of electricity and water. Their consumption also depends on how much the washing machine is loaded.
  • Safety. All models are equipped with protective devices that protect against voltage drops and stopping water supply.
  • Aesthetics. High.level designers have worked out the appearance of the products. Therefore, the cubes ariston have excellent aesthetic qualities. Among the lineup, each user can choose a suitable machine for himself, which will complement the interior of the room. Overlapping the water supply tap after washing?

The principle of operation of washing machines

First, it is recommended to figure out how any washing machine works. Water is supplied through the filter and valve to the unit. The output valve controls the hatch lock, which works when linen will be loaded and contact on the hatch is activated. Water level relay regulates its supply to the drum.

Then the water and rotation of the engine are heated. All stages of washing are activated according to the specified time in case of one or another mode. Water drain from the system occurs through the drain pump.

Having sorted out the washing machine, you can pay attention to various reasons in its incorrect work. It all starts, as a rule, with the simplest checks:

  • Whether the fork of the power supply wires on the network is included.
  • Is there any electricity in the outlet. Checking this is quite simple: it is enough to include another electric device in the outlet, for example a nightlight.
  • Cord and forks are checked. To do this, inspect them. They should be without damage, not have a burning or melting. Sometimes this is one of the reasons why the Ariston car does not turn on.

In this situation, it is forbidden to include the car again in the network. Cord repair is to replace it. It is purchased in special stores for household appliances. After acquisition, it is replaced. If the check did not give results, then the reasons must be sought inside the washing machine itself.

The causes of breakdowns

The check begins with the determination of the reaction of the device to the tasks of the program of its operation. If when the start button is pressed, the Ariston machine does not react and indicators do not burn, then we can safely say that any element of the machine has failed.

In addition, a cold water supply filter from the system may clog. In this case, the camera is not filled with water, and the machine is blocked. It is necessary to promote the adapter on the typewriter through which water enters, clean the filter mesh, install everything in place and try to start the unit again.

There are situations, the indicator flashes and does not turn on the Ariston machine. Also, sometimes the hatch door for laying underwear is not blocked. The reason for this is damage to the blocking device. If so, then it must be replaced. This repair is recommended to trust professionals.

Sometimes situations may occur when the squeezer does not turn on. There is a high probability in the controller malfunction. Measures aimed at checking it are as follows:

  • The block is removed and opens. It is closed by two side latches. They are easy to open with a screwdriver.
  • Then the fee is inspected, whether there are burned elements, or bloated electrolytic capacitors on it. If any, they need to be replaced. The replacement process is carried out using a soldering iron. It must have a power of not more than 40 watts. It is necessary to drop elements very carefully, as they can move due to high temperatures. For soldering and soldering, a solder with rosin is used. Before plowing, it is necessary to determine the polarity of the capacitors. This is usually written on their body.
  • If the installed block still does not work, then the most optimal option is to contact a specialized workshop or service center.

In addition, Ariston washing machine may not turn on when internal wiring is damaged. However, there are malfunctions, which is quite problematic to determine. For example, the cause of the breakdown can be lowered isolation in relation to the body of the apparatus, engine and plaits.

This can only be determined using the device. To do this, it is better to use a multimeter. The measurement range is selected within 20 MOM.

Probable malfunctions

If independent attempts to correct the error have not led to the result, then your smell is faulty, and the help of a professional master is required. These are the breakdown of our masters with the H20 code on the screen.

Pour valve. from 1600

With this error, the water supply valve to the machine most often fails. Usually the electromagnetic coil of the valve is burned out, so it does not open, and the washing machine does not gain water at all or only on rinsing.

The second situation is found in Ariston washing machines with a two.section valve. In this design, one valve section is responsible for a set of water on washing, the second part is on a rinse. When that part of the valve that opens on rinsing failed, the HotPoint-Ariston washing machine does not rinse the linen and gives out an error N20. And on the washing in this case, the car floods the water normally.

The valve is not subject to repair, it is required to replace it.

Water level sensor (Pressostat). from 1700

Pressostat measures how much water in Ariston washing machine. With the error of H2O, the signs of its malfunction are as follows:

hotpoint, ariston, washing, machine, squeals
  • The Ariston washing machine constantly floods and drains water, and then the H2O error code is displayed;
  • The washing machine pours water (too much water in the tank), then drains it and shows h20.

The pressure chamber is clogged in the press start, damaged, clogs or flows its hose or the sensor itself is out of order. The master diagnoses the level sensor and:

  • cleans the pressure chamber;
  • blowing a hose of the press start;
  • puts the hose onto the sensor if it flew;
  • Changes the phone when damaged;
  • The press is completely changed if its sensor is faulty.

Electronic controller (control module). from 2100

The control unit is the “brain” of the washing machine, it contains all the algorithms of the work. With this error, that part of it, which controls the water set (valve control, resistors, capacitors, etc.D.) or the firmware is knocked down. In this case, the Ariston machine does not pour water at all or picks up little water, then drains it and gives out an error N20.

It is necessary to replace the failed elements on the board in the chain of the water of the water, plunge burnt or rotten paths and contacts on the microcircuit. When firmware failures, the master takes off the fee and takes it to the workshop. There, the master electronic man falls out in memory, programs it again using special equipment and solders back.

With impressive damage to the controller or failure of the processor, the control module changes entirely.

Wiring, contacts in the filling valve circuit. from 1600

The wiring is grinding, and in private houses, rats or mice often gnawed at it. Contacts are oxidized or burned. As a result, the signal does not reach the filling valve, and on the washing machine the hotpont-argon is an error h2O. At the same time, it does not gain water.

It is required to restore the integrity of the wiring. The master makes twisting wires or changes the train. Contacts are cleaned and lost.

only for the work of the master, details, if necessary, are paid separately

Vosh Meng. Outbound repair service of washing machines. We arrive instantly, diagnose and repair washing machines at home. We give a guarantee for repairs up to 2 years.

hotpoint, ariston, washing, machine, squeals

Work prices

Services Price from) Request
Departure Diagnostics of the problem (in case of repair work) 0 ₽
Departure Diagnostics 500 ₽.
Replacement of shock absorbers 1150 ₽.
Drum replacement, tank 2000 ₽.
Motor replacement (motor, drum drive, electric motor) 1200 ₽.
Replacing the wiring harness 800 ₽.
Replacement of the filling / intake valve (kena, water supply valve) 650 ₽.
Replacing buttons, switches 700 ₽.
Replacing the crosses (shaft) 2200 ₽.
Luke’s replacement (doors, lids) 1100 ₽.
Replacement of the handle cuff (elastic bands, rubber seal) 850 ₽.
Replacing the support of the tank 2500 ₽.
Replacing the pipe 1200 ₽.
Replacement of the bearing 2500 ₽.
Replacement of the presetate (water level sensor, relay) 1300 ₽.
Replacing a drive belt 700 ₽.
Replacing the programmer (program selector, command equipment, timer) 1500 ₽.
Replacing the counterweight 2200 ₽.
Replacing springs 1750 ₽.
Replacing the handle of the hatch 1000 ₽.
Replacing the oil seal 500 ₽.
Replacement of the network filter (FPS, start capacitor) 1150 ₽.
Replacement of a drain / pouring hose 750 ₽.
Replacing the drain pump (pump) 1200 ₽.
Replacing the drain filter 1000 ₽.
Replacing the glass of the hatch 1000 ₽.
Replacement of the thermostat (water temperature sensor) 1000 ₽.
Replacement of the heater (heating element) 1200 ₽.
Replacement of UBB (Luke lock, castle) 1000 ₽.
Replacing the pulley of the drum 1300 ₽.
Replacing the curtain of the drum vertical machine 2200 ₽.
Replacing engine brushes 1100 ₽.
Repair of the control module, board, block, simistor 2000 ₽.
Gulf cleaning / drain system 700 ₽.
Elimination of blockage 800 ₽.
Removing an extraneous subject 900 ₽.
Installation / connection of the machine 2000 ₽.
Consultation by phone 0 ₽.
Malfunctions Price from) Request
It is current 200 ₽.
Vibration / greatly vibrates / jumps / shakes / jumps 700 ₽.
Stinks / rotten smell 600 ₽.
Knocks the machine (RCD, traffic jams) 600 ₽.
Gives a snack 500 ₽.
Erases for a long time 500 ₽.
Freezes / stopped during washing / hangs on an annex / stopped with water 500 ₽.
Programs hung 600 ₽.
The smell of burning / smoked 700 ₽.
The key flashes 400 ₽.
Indicators (buttons, light bulbs) blink 400 ₽.
Does not turn on / does not start / does not start work / stopped working 500 ₽.
Indicators do not burn 400 ₽.
Does not warm water / does not heat water 500 ₽.
The door does not close / does not block the hatch 600 ₽.
The drum does not spin / jammed the drum / the drum does not rotate 700 ₽.
Does not gain water / does not enter water / does not fill water 500 ₽.
Does not gain momentum / The drum is poorly spinning 600 ₽.
Does not stop / does not turn off / does not finish the wash 500 ₽.
Does not squeeze the linen / stopped squeezing / does not work out 600 ₽.
The hatch does not open (door, cover) / blocked / jammed 400 ₽.
Does not rinse the laundry 550 ₽.
The timer does not work 700 ₽.
Buttons do not work 600 ₽.
Does not react / does not switch the modes 400 ₽.
Does not drain water / does not work drain / does not let water / poorly drains 500 ₽.
Does not erase / picks up water, but does not wash / does not start washing 400 ₽.
Water remains in the drum 400 ₽.
Remains powder, air conditioning 300 ₽.
Disconnected during washing 500 ₽.
Getting under the linen / does not wash things 400 ₽.
Water overflow / gains a lot of water 600 ₽.
Squeaks 400 ₽.
Poor squeezes badly 400 ₽.
Constantly picks up water / constantly floods water 300 ₽.
Trips things 600 ₽.
Program failure 600 ₽.
The handle of the hatch broke 700 ₽.
Luke broke (door, cover) 700 ₽.
Immediately drains water / floods and drains water / constant drain 400 ₽.
Flows / leaks / flowing 700 ₽.
Noisy / buzzing / knocks / thunders / creaks / cracks / whistling 800 ₽.
Another malfunction Call
Full price list view “

Ariston washing machines are equipped with a display, which displays information about the washing process, mode. But there is another indispensable function of such a display. It will also be displayed on the breakdown codes of malfunctions. Each such code is responsible for some kind of breakdown and knowledge of their values ​​will help to quickly determine and eliminate the malfunction.

The following codes can be displayed on the displays of Ariston washing machines

  • F01: indicates a short circuit of the drive engine of the device. It is necessary to check the contacts of the controller, it is impossible to allow moisture to enter the motor. If a breakdown is detected, replace an electronic controller or drive engine.
  • F02: The electronic controller does not have information about the work of the motor. Inspection of the motor rotor will help to determine the problem (its work can be blocked by jamming of the bearings), also check the connections of all parts. The breakdown can be eliminated by replacing the engine or controller.
  • F03: malfunctions of the sensor responsible for temperature indicators, Ten. To eliminate this code, you need to check whether the controller with the temperature sensor is correctly connected, you should see if the electric resistance sensor has a sensor. If all these manipulations have not eliminated the problem, you need to replace the sensor.
  • F04: breakdown of the sensor determining the amount of water. Here, problem areas are the sensor itself, with its connection to the controller. If everything is in order, but the code does not disappear. replace the sensor.
  • F05: Problems of the drain pump. Check how the controller and pump are connected. If there are no breakdowns, but the problem is not eliminated, you need to check the pump, whether there is a network voltage in it. You should also check if there are clogs in a drain hose. If the breakdown after these actions remains, the pump is replaced, the press.
  • F06: There was an error with buttons. You need to check if the buttons of the device are working, check the panel for the presence of contacts with the controller. The discovered breakdown is eliminated, often a replacement of the control panel of the device is replaced.
  • F07: It is displayed if there is no immersion in the water of the heating element. Actions: checking the quality of the connection of the sensor that determines the amount of water and the controller, the sensor with the controller, as well as the heater, is tested. To eliminate the breakdown, you need to replace the problematic element.
  • F08: The “sticking” of the relay or problems with the sensor that determines the amount of water occurred. It is worth checking the sensor, relay connection with the controller. If a breakdown is detected, a replacement of the corresponding part is to be replaced. If the breakdown is not found, the controller is changed.
  • F09: Failure in energy.dependent memory. To eliminate the breakdown, the controller is changed. You can also try to make a firmware of the microcircuit responsible for the memory of the machine.
  • F10: the sensor of checking the amount of water does not send signals. It is necessary to check the joints, wiring, serviceability of the sensor itself and the controller with the replacement of the served part.
  • F11: Data from the drain pump do not receive. A check of the operability of the connectors from the controller to the pump should be verified, test the pump, if necessary, to replace it. You should also check the sensor.
  • F12: There is no connection between the indication module and controller. Similarly, the compound is checked with previous breakdowns, the detected breakdowns are replaced by new details.
  • F13: malfunction of the temperature control circuit of the drying mode. It is worth checking the connection of the controller with drying, check the sensor and replace the inoperative element.
  • F14: At the drying stage, it does not include it. It is necessary to check whether the heating element is interconnected by each other, to check the performance of both elements.
  • F15: The “drying” mode is not turned off. Check the connecting board, check with the subsequent replacement of the level sensor and the connecting fee.
  • F17: testifies to the open door of the hatch. Check if there is a network voltage, whether a micro-switch is working, how reliably it is clicks. The identified breakdown is repaired by the replacement of the lock lock of the hatch door.
  • F18: incorrect work of the microprocessor. To eliminate the code, you need to replace the controller.

The Atlant machine is squealing

The explanation is as follows: the indication unit functions together with the selector of the choice of programs, which is not particularly reliable in the machine of this brand, and begins to squeak as a result of work.

Due to the fact that the washing machine Atlant is squealing, it does not work worse. The image on the display is occasionally lost: instead of the selected mode, another is shown. The inscription Sel may appear, meaning the erroneous operation of the selector.

The irritating sound is eliminated: the indication module is replaced. But after a while, the problem may return.

Pisk in Atlant typewriter

All of the above does not belong to the owners of the Atlanta Silmers of the 50s82 Atlanta. This machine also squeals, but does it a little different and completely different. Here, in annoying sounds, the indication unit and the shifting block of programs are to blame.

The squeak is explained as follows: the indication unit works only along with the mode switch, which does not differ in a reliable design. The reason for the signing is just in the gear selector.

It is worth noting that the squeal of the washing of the washer is not reflected. It is rarely possible to malfunction in the form of an erroneous display on the display of one program instead of the user selected. For example, the regulator stops in the “cotton” mode, and the indicator shows the time and temperature for “fast washing“. Sometimes a “SEL” error appears at the same time, which deciphens as a “selector malfunction”. At Atlant, the squeak is eliminated by the replacement of the indication module. You can try to carry out repairs, but often the breakdown returns again.

Why doesn’t the heater warm the water

If water does not heat up in the washing technique, the problem is hidden in a broken heating element or violation in the wiring. So, the wires in most cars (no exception and indesit bwsa71253weu) are located near the case: the wiring is ground over time from vibrations that are created by technology. You need to stock up damaged sections of the wire, but it is better to replace with new.

Common reasons

  • Ten malfunction. To check the condition of the washing element that heats the water for washing, you need a “call” by a tester. If the heater breaks. it needs to be changed. It is not difficult to do it yourself. You will need to remove the rear “wall” of the machine, for example, Candy CSS4 1372D3/1-S (the unit should be disconnected from the power), after-weaken the mounts of the installed part, dismantle it and install a new. When replacing you need to be neat, so as not to damage the body of the washer.
  • Scale. Sometimes Ten begins to work weaker because of the resulting scale. It is enough to get the part and clean it. To avoid this in the future, it is recommended to use special softening products or install an additional water filter.
  • Relay or programmer malfunction. Repair and replacement of these components is best entrusted to the master.
  • Broken heating sensor. This element informs the “manager” module when you need to run the heater. If the sensor breaks, it will have to be changed.
  • A sensor that determines the water level broke. The breakdown leads in the tube (it is not difficult to clean it) or the case is wear. then you need to make a replacement.

After washing, the machine does not drain water

After completing the cycle in the washing machine (for example, Gorenje Wei74S3B), water remains? There are 4 reasons for this:

  • Program failure-often occurs due to disconnecting electricity-solved by restart. First, the program is canceled urgently: the device is disconnected from the outlet (for example, a convenient ground option. Mosaic Legrand 3XSchuko) and again turns on after five minutes. Another way is to change the program to the most short.term. For example, turn on the “Rinse Pusias” mode or a quick wash that Samsung WF60F1R0G0WD also has. If it did not help, you need to call the master.
  • The filter was worn out. To check the condition of the filter, you must first drain the water using the door, which is located in the lower corner of the unit. This procedure should be carried out carefully, having previously prepared a container for draining water so as not to flood the room. If the filter is clogged, it should be cleaned or changed.
  • The hose has worn out. you have to replace the part. If it looks whole, it is worth checking if the sewer pipe or siphon clogged. To do this, the hose is disconnected, hung in the sink and turn on the water drain mode. If it flows normally, then the problem is in the sewer itself.
  • The work of the pump is broken. If you can’t hear how it works or, on the contrary, it functions too loudly, it means that it has broken. Perhaps. clogged. To determine the exact reason, you need to get a pump and see if hair and thread have been wound on the shaft. If so. remove them and put the pump again. If the part is clean, but the tester shows that the voltage does not enter it. the element will have to be replaced.

Why is the washing machine when the spin is very noisy

Light noise during the operation of the ASM arises because:

  • Before operation, transportation bolts fixing the tank were not removed.
  • ASM is not installed as provided for in the operating instructions.
  • The washing machine was used for a long time, as a result, the drum bearings were worn out.
  • An extraneous item fell into the wall between the tank and the drum.
  • The pulley of the drum or a drive belt that transfers the rotational moment from the electric motor to the pulley was weakened.
  • The fastening of the counterweights stabilizing the ASM during the rotation of the drum was broken.

An extraneous noise in the washing machine with spinning can arise both immediately after buying equipment, and after several years of its work. If the unit is buzzing from the very beginning, the reasons are to be eliminated quite easy. But if the noise level during the rotation of the drum increased a long time, cm will have to be repaired.

Pisk not from the speaker

Когда писк слышится не из динамика стиральной машинки, а из барабана, сзади или сверху, то проблема в другом. It is likely that the audible sound is only similar to squeaking, but in fact it sounds different. Rather, the user “deceive” the following malfunctions:

hotpoint, ariston, washing, machine, squeals

In such cases, the squeak is necessarily accompanied by a suspicious clang, rattle and hum. But the problem can be solved faster and without involving professional masters. So, if the reason for the squeak in the belt, then it is necessary to remove it, rinse in a soap solution and grease with crushed rosin from pine. The latter is most important. the belt will not slide and make an unpleasant signing.

Pisk in Atlant typewriter

All of the above does not belong to the owners of the Atlanta Silmers of the 50s82 Atlanta. This machine also squeals, but does it a little different and completely different. Here, in annoying sounds, the indication unit and the shifting block of programs are to blame.

The squeak is explained as follows: the indication unit works only along with the mode switch, which does not differ in a reliable design. The reason for the signing is just in the gear selector.

It is worth noting that the squeal of the washing of the washer is not reflected. It is rarely possible to malfunction in the form of an erroneous display on the display of one program instead of the user selected. For example, the regulator stops in the “cotton” mode, and the indicator shows the time and temperature for “fast washing”. Sometimes a “SEL” error appears at the same time, which deciphens as a “selector malfunction”. At Atlant, the squeak is eliminated by the replacement of the indication module. You can try to carry out repairs, but often the breakdown returns again.

The most likely causes of creak

Modern washing machines of some brands are equipped with devices notifying the sound of the completion of the washing. In the instructions for the typewriter, this feature should be indicated. If the squeak is not a notifying sound, then the reasons should be sought in the wear of the household device.

  • weakening of the belt that drives the drum;
  • violations of the stability of the counterweight;
  • stuck of small objects and elements of clothing;
  • formation of rust on bearings;
  • weakening of the shaft mounts;
  • high degree of wear of springs;
  • friction of the details of the case on each other at the joints.

Consider why the washing machine is squealing, more.

Weakening of the belt

If the machine of the old brand, without a direct drive, is most likely that the belt that makes the drum move. A stretched belt slides, making a pronounced squeak. over, the sound is heard when washing is in active mode, the car is filled with a lot of things.

To check whether the belt is really to blame for the appearance, you need to get to it:

  • Remove the rear cover behind which the wheel is located. the pulley;
  • see if there is damage to the pulley;
  • Inspect the drive belt worn on the wheel.

The belt should be examined carefully. Even a small crack can negatively affect the work of the details, provoke an unpleasant squeak. If the damage is found, then the belt must be replaced. But sometimes it is enough to increase the tension of the drive part.

The instability of the counterweight

Removing the car cover, you can see a counterweight. He looks like a massive gray block. The detail requires a replacement if the diameter of the fasteners has become wider than the diameter of the attaching bolts. To make sure the structure of the structure, just shake it in different directions. If the counterweight is staggering, then it’s time to replace it.

Entering objects

By loading clothes into the car, housewives often forget to check the s for the presence of small objects, coins. During washing, this trifle spills out, through the hole in the cuff penetrates into the space between the drum and tank. In washing mode, the drum surface rubs on objects, making a squeak and creak.

To check whether small things are stuck inside, it is necessary to unscrew the wall of the washing machine (rear or front, determined by the model of the device), unscrew the heating element. Through the hole for the heater, you can see the objects inside, remove them.

Rust on bearings

If the drum is squealing in washing mode, then the problem can be serious, requiring professional repair. The drum is attached to the shaft, he is inserted into the bearings in the tank. Bearings are protected from moisture penetration. This rubber device gradually dries, defects appear on it. Damaged oil seal. As a result, bearings are covered with rust, begin to creak and squeak in working mode.

If the squeak of the washing machine is a consequence of the rust of bearings, then the washing must be stopped immediately. If the spoiled bearings work in the same mode, then they will finally break. And this will surely lead to a breakdown of other elements, and the car will have to be sent to the scrap. The only option to do in this situation is to contact the workshop.

Weak fasteners of the shaft

The problem is diagnosed infrequently, but still happens. Gradually, if the washing machine operates in active mode, the shaft fastening is loosened, weaken. The problem is a consequence and production marriage. The result is a drum unbalancing, the appearance of a characteristic squeak. The problem is easily easily: you just need to tighten the bolts. But getting to them is problematic, it is better to entrust this business to a professional.

Distribution of springs

Когда стиральная машина громко пищит при отжиме, проблема может заключаться в изношенных пружинах. When the device works, the tank shakes, and the springs are rubbing at the mounting site, making an unpleasant thin sound.

To confirm the cause of the sound, it is necessary to turn on the wash mode by removing the machine cover. Then press on the springs. If the squeak stops, then the problem is identified correctly. Usually, to eliminate it, it is enough to treat the lubricant of the place where the springs are attached. But sometimes it is necessary to replace the elements that have become unusable.

Friction of the details of the case

The fastening elements of the case are gradually weakening, the shifting parts during friction begin to squeak and grind. Sound is characteristic not only for worn instruments, it can be the result of production marriage. Carefully inspect the car, twist the loosened mounts.

If, after a thorough check, the cause of the squeak was not able to identify, then you will have to contact a qualified master so that he would diagnose and repair.

The Atlant machine is squealing

Owners of the Atlant washing machine (Series 50s82) have nothing to worry: the device is squealing, but the reason is not related to breakdown. Unpleasant sound. a consequence of the operation blocks and switching modes.

The explanation is as follows: the indication unit functions together with the selector of the choice of programs, which is not particularly reliable in the machine of this brand, and begins to squeak as a result of work.

Due to the fact that the washing machine Atlant is squealing, it does not work worse. The image on the display is occasionally lost: instead of the selected mode, another is shown. The inscription Sel may appear, meaning the erroneous operation of the selector.

The irritating sound is eliminated: the indication module is replaced. But after a while, the problem may return.

| Denial of responsibility | Contacts |RSS