How to build a dishwasher into a kitchen knoxhult

Can you put the dishwasher under the oven

When planning a kitchen space, many people try to make every inch useful. Before arranging the appliances, you should read the requirements and tips that are written in the instructions. After buying a dishwasher, some owners have a question. is it possible to put the dishwasher under the oven? Manufacturers do not recommend installing these two devices next to each other.

The work of the dishwasher is connected with water, so it is not allowed to stand near :

ikea Knoxhault Modular Kitchen

They can be damaged if they come into contact with water. During cooking, heat spreads from them, which negatively affects individual elements and electronic parts. So when answering the question of whether or not you can put the dishwasher under the oven, the experts give an unequivocal answer. no.

There are specific requirements. One of them concerns the gap that should be between the appliance and other surfaces. Do not place it too close together. Mounting the built-in device must be rigid, so you should not install the dishwasher in the extreme drawer of the kitchen set without reinforcing the side wall. The distance from the dishwasher to a corner section or wall must be 50 cm. Otherwise it will be inconvenient to open the door and perform loading and unloading of dishes.

Manufacturers do not advise to fasten the device on both sides, you can use the adjacent drawers of the set. It is not easy to meet the installation norms in a cramped and small kitchen. In such a case, you should not purchase the PM or you will have to break the rules, which will lead to serious breakdowns and loss of warranty. The risk of malfunctioning increases by 1.5 times.

If it’s not possible to extend the water supply and drain pipes, the appliance is placed closer to the sink. That is where the main communication systems that are needed for connection are located.

To place the dishwasher under the oven, it is necessary to observe a number of rules

How to build a non-built-in dishwasher. installation conditions

Before you can buy and install a dishwasher, you need to find a good place for it.

The easiest thing to do with freestanding units. a bit of free space on the floor or table will suffice for them. But what to do when you plan to buy a built-in model, which can be hidden behind a decorative panel?

The main advantage of built-in kitchen equipment is its “invisibility. Powerful, multifunctional units are hidden behind furniture fronts, not overloading the interior with their technicality

It is necessary to arm yourself with a construction tape measure and check which cabinets will fit for the installation of the PMM. To learn the dimensions of dishwashers is not difficult. the information is available on the official websites of stores that sell household appliances.

build, dishwasher, kitchen

Pay attention to. Machine manufacturers base their production on the height of the person and the size of the furniture and adjust their models accordingly.

For example, most of the dishwashers of well-known brands have a width of 60 cm (more precisely, 598 mm) or 45 cm (448 mm). 45-centimeter models are called narrow, and they have more possibilities for embedding in the finished kitchen.

Functionally and the number of programs narrow dishwashers are not inferior to wide machines, so sometimes it makes sense to analyze the proposals of this type of equipment

Narrow models usually have a height of 815 mm to 875 mm, which is equal to the standard height of kitchen tables and cabinets.

If the set is made to order, the level of countertops may be lowered for technical reasons, for example, a pipe gets in the way, etc. Therefore, when measuring you need accuracy. just one extra centimeter can be decisive.

The depth of the machines. 550 mm. Some centimeters are left over for comfortable connection of hoses and wires so that they do not clog.

There is a category of compact machines, which differ from the full-size ones in height. For ease of use, they are usually built into the upper modules.

Average dimensions of the compact machine: 550x500x438 (WxHxV). Unlike a freestanding model, a built-in model requires a furniture module with the necessary dimensions

If you have found a suitable size cabinet, then do not forget to consider the location of communications:

Additional electrical cable can be routed if necessary, and you can hardly move the pipes in the finished kitchen, so the place of installation of the machine is usually chosen next to the sink. that’s where the main nodes of water supply and drainage are concentrated.

If at least one of the conditions is not met, for example, there is no suitable module or can not get close to the communications, then you have to postpone the purchase of a built-in dishwasher or think about remodeling the kitchen.

Built-in options

Built-in cabinet can look in different ways. We suggest considering a few popular options that are easy to install.

Each type of installation presents its own set of challenges. To minimize them, it is important to follow the above conditions and requirements specified in the manufacturer’s instructions. Here are a few recommendations on installing the dishwasher in different places.

Built in cabinets

If you have a cabinet with a width of over 45 cm next to the sink, you can use it to mount the dishwasher. The advantage of installation close to the utilities. the possibility of integrating the hoses of the machine into the already installed system under the sink.

Dishwasher connection option: an extended cold water supply pipe with shutoff valve, drain hose outlet into the washing trap, a separate electrical outlet

From the cabinet will have to remove the shelves and the back wall, if necessary. the bottom panel. Built-in cabinet must be brought to a strict vertical position, for this purpose, adjustable legs are used.

Important. Then the appliance must be connected to the drains, water and power supply in turn. If necessary, an additional odour trap with a drainage pipe must be installed.

Decorative front panel, which is attached to the door of the machine, is usually assembled from the removed cabinet doors or ordered additionally. Partially built-in models do not need to be decorated, so their installation is a little easier.

Installation in a freestanding module

If no free cabinets for the new equipment are found, but there is enough space in the kitchen, you can order a separate module, but it must be installed near the communications.

A drawer unit for the additionally purchased appliances. compact washing machine and dishwasher. The module is mounted as close as possible to the sink, which makes it easy to connect

It is important to align and secure the unit so that it does not vibrate when operating and does not move the cabinet. Hoses and pipes are routed along the wall, but are easier to access.

To get to the utilities, you can not dismantle the machine, but simply move the cabinet away from the wall. When the dishwasher is installed under a common kitchen countertop, you have to dismantle it for maintenance, because otherwise the hose connections are not accessible.

Recessed mounting

If there is a niche in the kitchen for a microwave, oven or other small equipment, it can also be used to mount the dishwasher.

Dimensions of the compact model along with drawings can be found in the installation instructions. If the niche is located far from the utilities, you will have to stock up on long flexible hoses for the cold water supply and the drain of used water

Built-in compact models should not be confused with freestanding. The latter do not need to be placed in a niche. any horizontal surface will do.

So that the dishwasher is not conspicuous and is hidden like the rest of the equipment, the front part is covered with a decorative overlay in the style of the facade.

Developers usually think of different options for installing the technique, so in the installation instructions placed drawings and diagrams with dimensions, helpful hints, technical recommendations

Place for a compact model is easier to find, but do not forget that a large family will not be able to serve a mini-machine.

If recessed installation is not an option

What to do if there is no space at all for a built-in model? You only need to consider free-standing models that do not require any special installation. They can simply be installed on the floor, countertop or niche, aligned and then connected.

There is another way to fulfill your dream of installing a built-in dishwasher. a complete rearrangement of the kitchen set, with the possible repair or transfer of communications. It is more costly, it requires not only financial investment, but also time.

Dishwasher installation conditions

Before deciding to buy a dishwasher, decide on the place and the possibility of installing it.

This task is much easier with freestanding modifications. You won’t need a lot of free space in the kitchen, on any of the worktops, on the windowsill or even on the floor. A built-in model can only be installed in a specially prepared niche.

The indisputable advantage of built-in models. it’s high hygiene, reduced noise level, lack of visibility of the unit body, hoses and wires. All this makes such dishwashers more preferable. Ideally, our kitchen units come with a pre-installed dishwasher cabinet. Otherwise you would need to provide a suitable place for it yourself.

To do this, you must first find out the exact dimensions of the basic models offered by retailers. Such information is presented in advertising brochures and pamphlets, on store websites, or on price tags in the salesroom.

Next, using a tape measure, make measurements of all cabinets, other pieces of furniture in the kitchen. Account for any available clearances, e.g. between cupboards, between cupboard and refrigerator, etc. According to the results of these studies, choose a model of the machine according to its dimensional features.

Well known dishwashers are often 60 cm wide and less often 45 cm wide (narrow models). Narrow models have a height of 82 to 88 cm, which corresponds to the standard height of kitchen tables. The depth of all machines is 55 cm, which allows you to connect the communications to the fittings and connectors located on the back wall.

The next step in the preparation of the installation space is to take into account the available connection points for the utilities or the possibility of parallel entry.

To connect will require availability:

While the electrical cable can be easily installed if required, the water supply and drainage tubes are more problematic. For this reason, the place of installation is chosen next to the sink. The possibility of equipping risers with tee fittings will solve the problem of connection quickly and with minimal cost.

The choice of location depending on the type

To embed the device, you need to properly determine the location of the technique: the opening of the section should correspond to the dimensions of the box of the machine, the means of communication are not far away. Specialists offer several options:

Type of equipment Space for dishwasher Advantages Disadvantages
Partly and fully recessed Under the sink in the sink Many models are the same depth and width; proximity to the water drainage system You may need to redo the bottom of the sink; buy a new trap
Floor cabinet Appliance panel is hidden behind the decorative facade The necessity of remodeling a piece of furniture
Dismantling the niche in the kitchen set Matching the panel with the color of the furniture facade Reducing storage space for kitchen utensils
Compact models For a freestanding appliance Easy installation Considering the accessibility of the electrical appliances, as they reduce the space available in the room

This makes it easier to fit compact models into a finished kitchen.

Features of self-placement

Let’s consider two possible options for installing appliances in the interior. It is installation in a new set, the scheme of which takes into account the order of a special niche for the dishwasher. And also, placement in the old kitchen, taking into account the availability of ready-made cabinets.

Installation in the new kitchen

Usually built-in models of the automatic dishwasher are made narrower. It is much easier when ordering the kitchen to provide space for the appliance in advance, otherwise it will be difficult to fit the machine into the set without rearranging the furniture later.

If there is nothing in the room but walls, then make a sketch of the future kitchen. Consider the space for appliances, the possibility of easy connection (the location of outlets, proximity to services).

You’ve already decided on a dishwasher (Bosch, Whirlpool, Kandi)? If you want to fit the appliance in an Ikea kitchen, then measure the dimensions of the model in the store, enter the results in the sketch and give it to the furniture makers. Do not forget the space for ventilation.

The walls of the washing machine must not touch the furniture. On the sides and rear leave a minimum gap of 5 cm. It is important to remember about the connection of hoses and wires. That’s why you can order the cabinet without the back. The calculations include the thickness of the fronts.

This is a headset panel, which will help hide the appliances from prying eyes. The method of its attachment to the dishwasher is taken into account. These can be screws or self-tapping screws.

Placement in the finished kitchen

If space allows, divide the kitchen cabinets by 45-60 cm. It is important to choose a place close to the sink. Also consider distance of socket outlets. Conventional washing machine on legs with wheels makes installation easier.

You can place it in the cabinet or under the sink and adjust the height of the feet. Optional fasteners for attaching the cabinet to the cabinet walls.

The installation of a freestanding machine under the countertop should be carried out with this calculation:

  • The upper panel of the automatic dishwasher is flush with the worktop. But this must not interfere with the opening of the door.
  • Adjust feet to desired height. If the feet are stationary and you need to raise the appliance, put a wooden box underneath the base.

If the depth of the niche allows it, move the dishwasher further inward so that it can be mounted over the appliance door. Prepare the cabinet for installation:

There are no free cabinets to place the appliance in? Then you are left with the sink option. It can be a corner arrangement, the main thing is that the dishwasher fits in the hole.

To gain extra space, put a new siphon that drains water backwards and then downwards. If the sink is too deep, it can be replaced with a shallower one.

Tools and parts for installation

Depending on the place of installation, you will need the following accessories: euro sockets (moisture-resistant);

  • copper three-core cable with a cross section of 1.5 mm (for wiring to the socket);
  • brass tee;
  • Drain and fill hose increased length (connections are not allowed, it is better to take one-piece hoses); corner faucet;
  • A 16-A fuse box (in the case of self-preparation of electrical communications);
  • rubber gaskets, clamps, caulk, phum tape;
  • siphon with two outlets (for installation under the sink);
  • water filter (will increase the lifetime of the appliance).

Prepare the tools in advance so that everything is at hand:

  • adjustable wrench;
  • pliers;
  • a set of screwdrivers (Phillips and slotted);
  • construction level;
  • tape measure;
  • electric screwdriver;
  • (for wiring grooves).

On powerful equipment, it is recommended to install a stabilizer, which will protect the model from damage in case of a power surge.

Installation of hydraulic hoses

Connecting the drain hose is easy enough. To do this, simply insert it into the hole provided in the odour trap. If the diameter of the siphon inlet is much larger than the diameter of the drain hose, use special rubber adapters.

The sequence of installation of the pressure hose:

  • Turn off the water pressure in the kitchen.
  • Disconnect any pressure hose from the water faucet.
  • In its place, install a brass tee.
  • Connect the faucet pressure hose to the tee.
  • Place a ball valve on the free outlet of the tee.
  • Attach the dishwasher pressure hose to the faucet.
  • Turn on the water and check that all connections are tight.

This plumbing sequence is suitable for machines of all sizes. A 60 cm wide built-in dishwasher will follow the same pattern as a 45 cm wide one.

Connect the electrical supply

Warning! Carry out all electrical installation work with the mains electricity switched off. Check that the breaker switch is in the correct position. Use an electrical probe to be sure.

Use special plastic plugs to connect the electrical wires. These are usually included.

Power connection sequence:

build, dishwasher, kitchen

Кухня 6 кв метров, Дизайн маленькой Кухни

  • Unscrew the latch of the electrical installation cover on the rear side of the machine.
  • Connect the wires. Be sure to connect the ground wire.
  • Wear the protective plastic caps. Plain electrical tape is not a good idea.
  • Put the wiring cover back on.
build, dishwasher, kitchen

That’s it. The dishwasher is fully connected. Now slide it into the furniture niche and secure it. Turn on the electricity and water. Check for proper operation. You should have everything in order.

Installation procedure for the built-in model

The algorithm of installation of the dishwasher is prescribed in the instructions provided by the manufacturer. Usually it consists of several stages, the first of which is preparatory.

In advance you need to buy some details for connecting to the pipes, take care of the socket device, prepare a tool. an electric screwdriver, screwdriver, hammer, as well as tape or fum tape for plumbing connections, sealant, double adhesive tape.

Step 1. Checking the equipment of the washing machine

In addition to the dishwasher, the kit usually includes templates for installing decorative covers, fixing tools, protective rubber apron, gaskets, hoses.

To make sure that everything is in place, you need to find a list of accessories and check the availability of each of them. If something is missing, you will have to buy more.

Be sure to check that the installation instructions are in Russian. Famous brands duplicate the description of the installation process on their official websites in special sections.

| Denial of responsibility | Contacts |RSS