How to Clean the Limescale in a Washing Machine

How to clean the outside of the machine

It is best to start cleaning appliances with the external elements, which are publicly accessible. Before the procedure, you must disconnect the machine from the power supply. Wash the exterior elements one at a time:

  • housing. Wipe the outside walls with a cloth or sponge moistened in a soapy solution. Use lukewarm water and any detergent for greater effectiveness;
  • The filter is located on the hose through which the water for washing is fed. It must be removed and cleaned. You must first turn off the faucet and disconnect the hose from the system. To clean the filter from accumulated dirt, it is convenient to use a cotton swab;
  • The filter is part of the water drainage system and is usually located in the lower part of the machine. Prevents debris and small objects from getting into the pump. To clean the filter, remove water from the drain compartment, remove the part, clean and rinse under a pressure of water.

These are the main external parts of the washing machine that need to be cleaned regularly. Care for them usually does not require special cleaning agents, unlike the internal elements directly involved in the washing process.

What you need to know about limescale

As a rule, tap water is quite hard, that is, contains a lot of salts, which, when heated settles on various surfaces in the form of white or yellowish scum. Soft water is quite rare, and it still forms a sediment over time. Of course, there are modern purification systems that can soften the water, thereby making it safe for parts. However, not everyone can afford to install such filters.

Mainline filters, installed on the water system, can significantly reduce the hardness of water

Washing at high temperatures and using liquid detergents instead of traditional detergents speeds up the limescale-building process.

How dangerous is limescale in the washing machine? The layer of deposits that accumulate on the surface of the tubes of the heating element, interferes with the heater to conduct heat. First, the energy consumption of the washing machine increases and the heating of the water slows down. If there is too much scale, the appliance overheats and fails. As a result, the washing machine cannot perform the wash and gives the corresponding error code.

A thick layer of limescale formed on the tubes of the TEN, leads to its breakage

Lime scale formation processes occur in almost every washing machine. It is easy to see if there is fouling on the tubes of the heating element, you just need to try to look at the device. Take a flashlight and shine it on the bottom of the drum of the washing machine, the heating element is usually located right under it. Through the holes in the drum you will be able to inspect the tubes for the formation of limescale.

So, you’re convinced that the problem of limescale has also touched your appliances. Further in our article we will tell you how to remove limescale in a washing machine.

How to descale with baking soda

The mechanism of cleaning teapots and coffee pots with baking soda is simple: fill them with water, add baking soda and boil. In this case, it is recommended not to remove the kettle from the fire for another 20-30 minutes after boiling, and the electric kettle. turn on several times.

After the procedure, wash the kettle or the tank of the coffee machine from the inside and boil clean water.

If the plaque is very strong, try a more alkaline calcined soda instead of baking soda. Or add the same amount of salt to the baking soda.

Other ways to combat dirt in the washing machine

There are a number of alternative ways to deal with limescale and plaque.

A well-known tool for cleaning automatic washing machines. citric acid. It copes with the task no worse than vinegar, with a less pungent smell. There is a logical question: how much citric acid to pour for one cleaning session? Approximately 50-100 grams of powder will be enough for a complete cleaning. The remedy can be added both to the powder container, and in the drum, dividing between them a specified amount of citric acid.

Effective remedy for cleaning the washing machine from scale. citric acid

A popular budget remedy for cleaning machine parts is baking soda. It effectively eliminates fungus and mold, as well as destroys unpleasant odors.

There are a number of specialized products on the market. These include the chemical cleaners AntiKal, Dr. Beckmann, Five Plus, Filtero, Antikidpin etc. Also in the departments of household chemicals are sold descalers, which are produced by renowned manufacturers of washing machines, for example, Bosch or Candy. The reviews left by users on specialized websites and forums will help you make up your mind. Any of the chemicals you choose must be used strictly according to the instructions so as not to harm your health.

Whether you choose vinegar or a chemical cleaner, you should clean your machine at least once every six months. It will reduce the negative impact of limescale or other formations on the parts and extend the life of the washing machine.

Air out the washing machine

Cleaning the washing machine includes not only the procedures described above. To prevent the formation of mold, it is necessary to air the machine from the inside.

When you are finished cleaning, open the door wide so that the inside of the drum dries naturally. Unpleasant odor remains? Contamination is found? You will have to repeat the entire process.

clean, limescale, washing, machine

In general, it is worth making a habit of leaving the door open after each wash. At least until the drum is completely dry. This reduces the likelihood of mold and bacteria breeding on the inner surfaces of the washing machine.

Tips from experienced housewives. a selection of the best folk methods to solve the problem

Almost all effective detergents, which are used to remove limescale, have some kind of acid in their composition. That is it, combines with the salts dissolved in the water, and then reacts with them. This removes limescale.

Let’s list the most popular cleaning methods:

  • The citric acid is placed in a container that is designed for detergent. You need to take 100 grams of lemon powder. Then select the longest wash program. It is important that the water temperature is at least 60°C.
  • In the evening, citric acid is poured into the detergent tray. Then select a wash cycle with a temperature of at least 90°C. In the very middle of the process, the washing machine must be stopped, cutting off its access to electricity. Leave the machine unplugged in this state until morning. This will be enough time to clean the drum and the heating elements. In the morning, the washing machine is plugged in again and continues to work from the point at which it was stopped.
  • To the citric acid, add whitener and run the longest mode of washing. The water temperature must be at least 90°C. Note that if you choose this method of cleaning, you must take care to ventilate. Good ventilation is important not only in the room where the unit is installed, but also in all rooms. It is advisable to keep people out of the apartment. Chlorine fumes can be harmful to health. They also have a negative effect on human mucous membranes.
  • To clean the machine from limescale and dirt use acetic acid. Pour 50 to 100 ml of vinegar into the detergent tray. Then select the longest wash cycle. The water temperature must be at least 60°C. This method is very effective, but it is also considered aggressive. For best results, machine operation is interrupted for one hour, then the cycle must continue again.
  • Fungus and mould on the drum can be effectively removed with the baking soda solution. The soda dilutes 250 g of soda in 250 ml of water. The resulting solution is used to treat the inner surface of the drum.
  • Chlorine-containing products can help fight mold spores. You can use bleach or any other bleach products. Pour 100 ml of bleach into the drum and run the idle wash for 30 minutes. Water temperature must be at least 90°C. It is best to leave the apartment for this time, leaving the windows open.
  • Another rather untraditional method. In 100 g of warm water you need to dilute 50 g of copper sulfate. Mix the mixture well, then pour it into the drum. Choose a wash cycle with a temperature of 90°C and start it. 30 minutes is enough for cleaning.

How to remove scale

To remove insoluble salt deposits you must use agents that destroy the structure of the scale. These are acid or alkaline media which react with organic deposits. You can scale the appliance using either specialised ready-made mixtures or your own concoction. Store products can be divided into prophylactic (like Calgon), which softens water and prevents the formation of salt on the parts, and hard cleaners. Mixtures of the second type can be dangerous for the treatment of old machines, as they are aggressive media and are involved in destructive processes.

Service Wash. Cure Washing Machine Smells & Remove Limescale

Prophylactic formulas have strengths and weaknesses. They do improve water quality and prevent the formation of salt deposits, but do not always do it effectively. So it is better to use in a timely manner to remove scum, such as “Magic Power” or “Topper”. Do not use them more than once every three months, and if you do not use the machine every day, they should be cleaned twice a year. The procedure should be carried out as follows:

  • Pour the chemical into the bulk powder compartment.
  • Activate the wash mode without laundry. If there is no such mode, then include a normal wash at 90°.
  • After cleaning with the chemical, perform an additional rinse, this will remove the powder from all compartments of the machine.

The best formulas

Limescale remedies can be sold in different forms. Most often there are loose powders, gel mixtures and solutions. For washing machine care, any products will do, whether they are specialized preparations or universal solutions for removing salt deposits from any surfaces, since they all have approximately the same chemical composition. Most often the agents are poured or poured into the powder compartments, but for greater efficiency you can add them directly into the drum. The most popular are:

  • “Magic Power. An environmentally friendly descaler, produced in Germany, for the removal of all types of limescale, including deposits of calcium salts. The detergent is based on citric acid. Sold in 500g boxes and costs approximately 250g; Magic Power is a descaler for the heating element and drum walls of the washing machine
  • “Topperr. The Italian rapid descaler. Sold in powder form in 125g packages. Topperr is a universal descaler, used for both washing machines and dishwashers
  • “Top House. express-cleaner for heating elements and internal parts of washing machines. Sold in powder form in packages of 200 g The composition is based on citric acid and carbonic acid diamide (urea). Top House is a universal descaler, suitable for all types of washing machines and dishwashers

Folk remedies

It is possible to clean the drum and the heating element from the scale by using folk remedies. These recipes are highly effective and are suitable not only for preventive, but also for comprehensive measures that prolong the life of the technique:

  • citric acid. Citric acid is the main active component in many store remedies. It actively dissolves salt deposits, kills pathogenic flora and cleans all the internal elements of the washer-dryer from impurities. Lemon juice is poured directly into the drum and turn on the washing mode without laundry or washing cotton at a temperature of 90-95 °. If cleaning has not been carried out for a long time, you will need 200 g of loose composition, and if it is a preventive measure, then 100 g will suffice; Buying citric acid, it is better to opt for large packs of 100 or 200 g
  • Whiteness. If there are small children in the house, it is better to refrain from this method. This is a very effective tool, allowing not only to clean the internal parts of the machine from the scale, but also to kill fungal spores, which often live in the gaskets and drain tubes. There is one major drawback: when heated, chlorine gives a pungent smell, and its fumes are dangerous to humans. Therefore, you should open windows or turn on forced ventilation of the room:
  • Pour 100 ml of bleach into the drum and sprinkle 50-100 g of citric acid to increase the effectiveness of the procedure.
  • Turn the washing mode on the maximum temperature.
  • After its completion, run an additional rinse to completely remove the remains of detergents; Whiteness effectively copes with scale and mold spores living in the machine
  • Vinegar. It is the most aggressive cleaning agent, and is used only in critical situations. The procedure should be carried out as follows:
  • Pour two cups of 9% table vinegar into the drum of the machine.
  • Run the wash cycle at 95°C.
  • After the temperature in the tank has risen to a maximum, set the program pause for an hour. The pause is essential for the cleaning solution to penetrate into the most inaccessible areas of the drum.
  • After one hour, restart the wash cycle, bringing it to an end.
  • After you finish cleaning, select extra rinse mode to wash off vinegar residue. Vinegar acid can dissolve all types of dirt, including salt deposits on the heating element and drum of the washing machine

What you can’t do to clean the washing machine

Cleaning the drum and internal parts in the washing machine must be very delicate, as there is a risk of ruining the equipment and putting it out of operation. It is important to consider a number of prohibitions:

  • it is impossible to clean the machines, on the metal parts of which rust traces appeared: aggressive agents will accelerate the process of rust spreading, worsening the quality of washing and reducing the service life of the washing machine;
  • Do not fill the drum with anything, such as baking soda. You can meet the information that soda perfectly removes limescale, but everything happens on the contrary: when heated, the product decays, deposited on the heating element in the form of sodium salt, which only worsens the situation;
  • Do not use simultaneously acidic and alkaline media to fight all types of dirt. In the course of a chemical reaction, the drain hoses get clogged, the valves controlling the water intake and discharge fail, the gaskets get burst;
  • Do not abuse cleaning with aggressive media: it can eventually “kill” the coating of the drum.

Effective descaler for washing machines

The appearance of the washing machine in the house saves time and facilitates the washing process. The first time after purchase, the machine copes with its task flawlessly, but over time, some housewives pay attention to problems with heating water and increased consumption of electricity. The cause of such problems can be scale formation on various parts of the device, in particular on the heating element. How to descale a washing machine, we will explain in detail in this article.

Limescale in the washing machine can cause damage to the heating element

| Denial of responsibility | Contacts |RSS