How to clean the washing machine tray

How and what to clean the powder tray (container) of the washing machine

Not many housewives pay attention to the powder tray of the washing machine, and meanwhile over time it begins to get dirty, it gets scum, lime scale, and in some cases even mold. As a result, the powder or fabric conditioner begins to poorly wash out, in the drum itself can get spores of mold, which will begin to breed there behind the sealing rubber bands. We will tell you how you can clean the powder tray quickly and effectively at home with the help of simple means.

How to get the powder tray out of the washing machine

To clean the powder tray, it is advisable to remove it from the washing machine. This should be done carefully, following the instructions, so as not to break the tray.

If you apply excessive force, the plastic powder tray can crack.

You will usually push the tabs on the tray and pull it out to remove it. Some washing machines, such as Indesit and Ariston, have a harder time pulling out the powder tray. Ask a washer-dryer repairman to show you how to do it.

How to Clean a Dust Tray in a Washing Machine

The automatic washing machine is one of the most frequently used appliances in the house. Along with the refrigerator, stove and microwave oven, it is an integral part of human life. But the trouble is that while ruthlessly exploiting their “home helper”, people often forget that they need to take care of it. In this article, the master plumber will tell you how to clean the powder tray in the washing machine.

clean, washing, machine, tray

The automatic washing machine tray is quite a dirty place, in some cases, the tray is clogged with detergent so that the water stops flowing into it and wash away the powder, dirtier only in the tank, drain pipes and the drain hose.

Unlike the tank and drains, which are more difficult to reach, the tray is much easier to clean, because it is visible. In fact, it turns out that quite a few automatic washing machine users do not know how to pull out the tray and have never thought about cleaning it.

If your machine’s tray is not too dirty, you can clean it without taking it out. But if the dirt is strong enough, then for your own convenience, as well as for better cleaning, it is better to remove the container. This process may be difficult for newcomers, but as you get used to your machine model, you’ll be able to get the tray out with one deft movement of your hands.

In different models of machines, dispenser trays are positioned differently. Therefore, before removing this part from your washing machine, carefully read the instructions.

To remove the tray, you usually need to do this:

Now that you have the dispenser in your hands, you can use one of the following ways to clean it.

What to do when cleaning the powder compartment

  • Do not rub the powder tray too hard. This could cause the labels in the compartments to rub off.
  • Clean the area where the container was removed with a cloth or sponge. Pay special attention to the water inlet and detergent outlet on the drum.
  • If you choose an aggressive cleaning agent, use rubber gloves.
  • Trays in vertical-loading machines cannot be pulled out. Water used to wash them flows directly into the drum. You must therefore be very careful, otherwise you could cause a small flood.

Remove the basket and soak it by directing a stream of slightly hot water at it. Rub thoroughly with a sponge or brush. For more cleaning effect, you can apply dishwashing liquid or soap solution (dissolve shavings of laundry soap in water). Then rinse it out again.

If there is still dirt on the dispenser, you can leave it to soak in hot water for a couple of hours and then repeat the cleaning procedure.

It may be that lime scale and petrified powder can not be cleaned in the usual physical way, then come to the aid of chemical cleaning with the help of special means.

The following detergents work well for the dispenser and other parts of the washing machine:

  • “Eona”, “Dr. TEN”, “Antikalepin” will help in case of light soiling.
  • Frisch-aktiv removes dirt, lime deposits, and odors.
  • Sandokkaeb and Bork K8P (Korean remedies) can handle even quite strong dirt.

Difficult-to-clean deposits are removed by soaking. Removed from the machine powder tray is placed in hot water with the addition of one of the means, for example, “Domestos”, “Comet”, “Silit”, “Toilet duck”, “Sanfor anti-rust”. Dissolve the liquid in water (50 ml per 5 liters of water) and soak the pan. After 1,5-2,5 hours rub it with a brush and rinse under running warm water.

See also  What needles are needed for a sewing machine

If there are no household chemicals on hand, or its use is unacceptable for you, you can use folk remedies:

  • Baking soda is an all-purpose cleaner. For small dirt s will be enough to prepare a soda solution (baking soda and water in the proportion of 1:1), moisten a rag in it and wipe the dirty areas. Especially good baking soda in the fight against mold. If you need to “defeat” stubborn stains, make a paste of baking soda and apply it to the entire surface of the tray. After 30-40 minutes, wipe.
  • Citric acid is a traditional folk remedy for limescale. To clean the powder and conditioner tray, citric acid is poured into the compartment and include an empty machine. The temperature mode when carrying out this procedure should be from 60 degrees. In addition to the tray, other elements of the machine will be cleaned of limescale.
  • Vinegar copes well with lime scale. We use 9% table vinegar to treat the tray. Dilute a glass of acetic acid in 1 liter of hot water and soak the tray in this solution for 6-8 hours. Afterwards use a kitchen sponge and rinse well. True, to soak the whole powder tray, you will have to prepare more than one liter of solution.

In the story. How to clean the powder tray in the washing machine

And in order to clean the powder container, removed from the washing machine, was as easy as possible, it is necessary:

  • After each wash, after removing the laundry from the machine, wipe the tray and the gum in front of the drum to remove detergent residues.
  • Leave it ajar for a couple of hours to evaporate moisture from this compartment. Thus do not create conditions for the growth of mold and mildew.
  • Reduce the amount of liquid to be poured in or out. It may remain on the walls of the dispenser due to an overabundance. overloading contributes to the formation of lime scale. The installation of the main filter will prolong the life of all appliances and plumbing.

in a clean container for powder, bleach and conditioner will ensure long and reliable operation of the machine and high-quality laundry.

How to clean the powder tray in a washing machine

The automatic washing machine. this is one of the most frequently used units of household appliances in the house. Along with the refrigerator, stove and microwave oven, it is an integral part of human life. But the trouble is, ruthlessly exploiting his “home helper”, people often forget about the fact that it needs to look after. In this article, the master plumber will tell you how to clean the powder tray in the washing machine.

Automatic washing machine tray is quite a dirty place, in some cases, the tray is clogged with detergent so that the water stops flowing into it and wash away the powder, dirtier only in the tank, drain pipes and the drain hose.

It’s easier to clean the bowl. unlike the jug and drains which are harder to reach. In fact, it turns out that quite a few automatic washing machine users do not know how to pull out the tray and have never thought about cleaning it.

If your machine’s tray is not too dirty, you can clean it without removing it from its seat. But if the dirt is strong enough, for your own convenience and for better cleaning, it is better to remove the container. This can be confusing for new users, but as you become more familiar with your machine, you can take it out with one quick flick of the wrist.

Dosing trays are located differently in different models of machines. So before you take this part out of your washing machine, be sure to read the manual carefully.

To remove the basket you usually need to do the following:

Now that the dispenser is in your hands, you can use one of the following ways to clean it.

What is recommended to do when washing the powder compartment:

  • Do not rub the tray too hard. This can cause the marks in the compartments to rub off.
  • Wipe the area where the container was removed with the inside of the cloth or sponge. Pay special attention to the water and detergent outlets to the drum.
  • Wear rubber gloves when using aggressive cleaning agents.
  • Trays in vertical-loading machines cannot be pulled out. The water used to rinse them flows directly into the drum. You must therefore be careful, otherwise you could cause a little deluge.

Remove the tray and soak it by directing a stream of slightly hot water. Rub thoroughly with a sponge or brush. For more cleaning power, you can spray them with dishwashing liquid or soap solution (dissolve shavings of laundry soap in water). Then rinse it out again.

If there is still dirt on the dispenser, you can leave it to lie in hot water for a couple of hours, and then repeat the cleaning procedure.

It may turn out that the lime scale and petrified powder can not be cleaned in the usual physical way, then come to the aid of chemical cleaning with special means.

The following products are good against dirt on the dispenser and other parts of the washing machine:

clean, washing, machine, tray
  • “Eona”, “Dr. Ten”, “Antikalepin” will help with minor soiling.
  • Frisch-aktiv removes dirt, gunk and lime deposits as well as unpleasant odors.
  • Sandokkaeb and Bork K8P (Korean technology) can handle even very heavy soiling.
See also  Knocks out plugs when turning on the washing machine

Soaking soaks hard to remove limescale deposits. Removed from the machine powder tray is placed in hot water with one of the means, for example, “Domestos”, “Comet”, “Silit”, “Toilet Duck”, “Sanfor anti-rust”. Dissolve the product in water (50 ml per 5 liters of water) and soak the tray. After 1.5-2.5 hours, rub it with a brush and rinse under running warm water.

If there are no household chemicals on hand, or its use for you is unacceptable, you can use folk remedies:

  • Baking soda is an all-purpose cleaner. For small dirt s it will be enough to prepare a soda solution (baking soda and water in a ratio of 1:1), moisten a rag in it and wipe the dirty areas. Baking soda is especially good for fighting mold. If you need to “defeat” stubborn stains, prepare a paste of baking soda and apply it to the entire surface of the tray. After 30-40 minutes, wipe.
  • Citric acid is a traditional folk remedy for limescale. To clean the powder and conditioner tray, pour citric acid into the compartment and turn on the empty machine. The temperature mode when carrying out this procedure should be from 60 degrees. In addition to the tray, other elements of the machine will be cleaned from limescale.
  • Vinegar copes well with lime scale. To treat the tray we use 9% table vinegar. Dilute a glass of acetic acid in 1 liter of hot water and soak the trough in this solution for 6 to 8 hours. Afterwards wipe with a kitchen sponge and rinse well. True, to soak the powder tray as a whole, you will have to prepare more than one liter of solution.

In the story. How to clean the powder tray in a washing machine

And in order to clean the powder container removed from the washing machine, as easy as possible, it is necessary:

  • After each wash, after removing the laundry from the machine, wipe the tray and the gum in front of the drum to remove detergent residue.
  • Leave it ajar for a couple of hours to evaporate moisture from this compartment. Do not create conditions for the growth of mold and mildew.
  • Reduce the amount of product being dispensed or poured. Too much may have remained on the walls of the dispenser. It promotes the formation of limescale. Installing a line filter will prolong the life of all appliances and plumbing.

In the cleanliness of the container for powder, bleach and conditioner will ensure the long and reliable operation of the machine and quality laundry.

How to clean the powder tray in the washing machine: the best ways, how to clean the fossilized residue

Dirt and soap solution often accumulate on the walls of the powder compartment in the washing machine. This can cause not only a breakdown of the appliances, but also deterioration of the health of the household, since harmful bacteria are formed in the container.

Clean the powder tray in the washing machine can be done in different ways, from industrial products to folk remedies.

How to get rid of mold on plastic

Mildew does not always develop in the washing machine tray. But, this is inevitable if the washing machine is in a damp, dark room, such as a bathroom. It is necessary to remove the mold immediately. it is not only an aesthetic problem. Mold causes allergies, skin problems and may even cause pneumonia. Therefore, it is important to clean it. How to do it in the case of the washing machine tray. here’s how to do it.

    Dissolve 100 ml of bleach in 1 liter of water.

  • Wash well with a sponge.
  • Rinse in plenty of water.
  • Leave the tray to dry on a dry towel upside down.

Mildew may not come out the first time after such a soak, if it is ingrained in the structure of the plastic. In such cases, it is recommended to apply the whitewash directly to the affected area with a cotton pad, undiluted, and rinse off after 10 to 15 minutes.

Important! Rinse the plastic thoroughly after using bleach. over, frequent use of chlorine in high concentrations can damage the front part of the tray. the snow-white coating can turn yellow.

How to get the detergent compartment out of the washing machine

You can clean the powder compartment without taking it out of the washing machine. But you can clean the detergent drawer more effectively if you pull it out.

The powder compartment must be removed very carefully, following the instructions so as not to break it.

The powder tray may crack if you are not careful.

On most washing machines, you will need to push in the tab and pull out the tray to empty it.

In some washing machines, such as Indesit and Ariston, it is more difficult to do this. It would be better if you first showed you how to do it by a washing machine repairman.

Vinegar is good for dealing with plaque and odor, but improper use of the product can harm the washing machine. The gaskets inside the machine are also exposed to acid which makes them lose their quality and can crack or tear. You can avoid this by sticking to the precautions of cleaning the washing machine with vinegar.

How To Clean The Detergent Drawer On Your Washing Machine | AEG

  • Use 9% table vinegar. If using vinegar essence, be sure to dilute it to a concentration of acid, as in table.
  • No need to resort to cleaning using vinegar to remove minor soiling, which can be handled by conventional cleaners.
  • Always wipe the cuff thoroughly with a clean, damp cloth after you finish cleaning it to remove any vinegar residue.
  • Make sure the room is well ventilated when cleaning. For example, if the washing machine is in the kitchen. open a window in the bathroom. turn on the fan installed in the hood.
See also  The pump on the washing machine does not work

Cleaning methods

There are many ways to clean the powder compartment. All of them allow you to easily get rid of dirt, and return details to their original appearance.

Mechanical cleaning

The easiest way to clean the powder tray in the washing machine is mechanically. It does not require a lot of time, so you can do the work after every wash.

  • Carefully remove the tray and rinse its compartment with hot water.
  • If in this way it was not possible to get rid of the dirt, then the container is placed in a basin with boiling water.
  • After about 10 minutes it is taken out.
  • Use an old toothbrush to remove dirt from all hard-to-reach places.
  • Rinse the compartments again with water.
  • If there are traces of detergent on the walls of the container, wipe them off with a soft sponge.
  • Afterwards wipe the powder container with a dry cloth to get rid of any residual moisture.
  • The tray is inserted into the appliance and left ajar for several hours.

Traditional remedies

Since the advent of modern household appliances, housewives have begun to think of various methods of cleaning the tray and dispenser for powder in the washing machine. This can be done in dozens of ways, which use effective and inexpensive folk remedies.

This food product can be found in any kitchen. It is used for all kinds of jobs (e.g., baking, washing dishes, or cleaning dirt from any surfaces).

  • Pour 1 cup of warm water into the container for preparation.
  • Pour the same amount of baking soda into the liquid.
  • The components are thoroughly mixed.
  • Put the solution obtained in a powder container and leave it to soak for 3 hours.
  • After the specified time, remove the cleaner.
  • Remove remaining dirt with a soft sponge.
  • The container is rinsed with warm water and wiped with a dry cloth.
  • Then keep it open for several hours.

Vinegar

It is an all-purpose cleaner that is used for a variety of household chores. It will help even if the powder compartment is clogged or has mold in it.

To clean the container perform the following operations:

  • Bring 1 liter of water to the boil in a small saucepan.
  • The boiling liquid is taken off the heat and mixed with 1 cup of vinegar (9%).
  • Pour the obtained solution in hot form into the compartments of the container.
  • After about 6-8 hours the fluid is drained.
  • The tray is rinsed with warm water.
  • Use the brush to remove dirt left in hard to reach places.
  • Rinse the powder container again and dry it with a dry cloth.

Citric acid

This crystalline substance can be used not only to clean the tray or the conditioner tank in the washing machine, but also the entire working system of the device. One pack of citric acid is sufficient for the job.

  • Pour citric acid into the powder container.
  • All clothes are removed from the drum of the appliance.
  • Use the settings menu to select a temperature of at least 60°C.
  • Set the quick wash mode.
  • Turn the device on and wait for the selected program to complete.
  • After that, the powder container is rinsed with warm water and wiped dry.

Household chemicals

To clean the tray often use a variety of household chemicals. It can quickly get rid of dirt and mold. At the same time, you need to carefully read the manufacturer’s recommendations, as some chemicals can only be used to clean one type of household appliance. Among the most effective cleaners stand out the following:

  • Toilet duck. It not only destroys mold and harmful microorganisms, but also bleaches plastic.
  • Silit. Soap scum and lime deposits can be perfectly removed.
  • Dr. Beckmann. The product dissolves dirt well and removes it from the container. Beckmann also kills bacteria and fights odor.
  • Domestos. Cleans powder residue and soap residue on the walls of the dishwasher.

often than not, the way you apply the household detergent will be the same. There are only a few situations in which you have to do some extra work.

  • Measure out the correct amount of detergent according to the instructions on the packaging.
  • It is placed in the tray.
  • All things are removed from the machine.
  • The machine is put into the Quick Wash mode and the temperature is set to 90ºC.
  • As soon as the appliance beeps to indicate the end of its operation, a new rinse.
  • The container is then rinsed with water and wiped of any residual moisture.
| Denial of responsibility | Contacts |RSS