How to disassemble a hair dryer Philips salondry control

Philips SalonDry Active ION HP4935 manual

View instructions for the Philips SalonDry Active ION HP4935 for free. Manual is categorized as Hair Dryers, 1 person(s) gave it an average rating of 5.8. The manual is available in the following languages: English. Do you have a question about the Philips SalonDry Active ION HP4935 or need help?? Ask your question here

How to Disassemble a Hair Dryer

Parts of the hair dryer body are attached to each other with screws (screws) and special latches. Screw heads often have non-standard shapes: star, plus, fork. Therefore, you may need the appropriate screwdriver bits. Latches, in turn, are sometimes very difficult to detach and even experienced craftsmen sometimes simply break them off. Sometimes the cavities for the mounting screws are covered with stickers, plastic linings or plastic plugs. Plugs are removed with a sharp object such as a knife or needle. In this case there is a high probability that the housing and the plugs will be slightly crumpled. But this does not make the hair dryer any worse. Sometimes the halves of the case are glued together. In this case you have to cut them with a knife or scalpel and glue them together after repairing (for example with epoxy glue).

You can see an example of how to disassemble the hair dryer in this

How to Disassemble a Philips Hair Dryer

Found this content disturbing or inciting religious hatred ? email us along with this video url.

Embed Video

I was looking for on the web how to disassemble and also how to assemble this device. I can’t find anything good.

Sitting Alone ?

Sitting alone and getting bored! The best way to escape the situation is to grab your mobile and go for the Social Media life, YouTube, etc. they will never let you be bored. The entertainment through the internet has been trendy since social media has developed.the priories of people have been changed, all though social media was created to have an active social gathering. But the results are getting the up-expected opposite. It has been noticed the flavors of relations are getting dull. Especially the young generation, they have used the social media in the way that the concept of socialism has been totally changed. The value of time with family is the most important; this is the main reason that we are facing many family issues. Somewhere social media has lower down the value of real experiences. People may have thousands of friends on but does not have a single friend in real life. You may like thousands of posts for the social work, but you never worked for the society. You may have liked millions of beautiful places, but you have never been traveled. The reality is the quality of experience is only based on real experience. We strongly promote viewers that vines and funny videos can be entertaining but the ultimate pleasure for the lifetime is based on the real experiences. We advise you that never let social media ruined your real family and social life. Be a good manager is awesome on social media and responsible for your family life. This will help you to balance your responsibilities and enjoyments. Never let yourself isolated from the ultimate great experiences for the lifetime. Good videos can be source of entertainment, but these videos will never give the memories.

Why PlayTube? PlayTube is one of the most popular video-sharing platforms in the United States. Billions of videos have been uploaded and shared on the platform since it was founded in 2013, ranging from Hollywood movie trailers and music videos to amateur vlogs (video blogs) and videos of cats.

PlayTube is a video platform that’s driven by two types of users: On-Liners (people who watch videos, interact with videos and subscribe to channels) Off-liners (people who have to download them for watch off-line)

Anyone with access to a computer or mobile device and an internet connection can watch PlayTube content. PlayTube is really for everyone. PlayTube is available in nearly every country and over fifty different languages. Although its user base ranges from young to old, PlayTube is particularly popular among younger people who prefer the wide variety of content, interactive components and instant gratification of PlayTube video content over traditional television. Many use it for entertainment purposes, for learning how to do something (tutorials), for keeping up with their favorite artists’ latest music videos and so much more.

Getting Started with Watching Videos On PlayTube

There are all sorts of ways you can watch PlayTube videos. They include: Navigating to PlayTube.pk and watching a suggested video or searching for one. Navigating the PlayTube mobile version and watching a suggested video or searching for one. Watching a PlayTube video that was embedded into a post on a social network (like or ). Watching a PlayTube video that was embedded into a web page or blog post. Watching a PlayTube video by clicking on a link to the video that shared via email, text message, social media, etc.

To get personalized video suggestions, create playlists, comment on other videos and subscribe to channels. There are lots of benefits to subscribing to the mailing list. With a PlayTube subscription, you can: Get personalized recommendations for videos to watch on the home page, based on your viewing history. Subscribe to your favorite channels so you can easily find their latest videos. Receive notifications from channels whenever they upload new videos. Support your favorite creators by interacting with their videos (liking them and leaving Комментарии и мнения владельцев). Keep track of your video viewing history. Save or download videos to watch later. Create your public or private video playlists.

Finding Videos to Watch on PlayTube There are multiple ways you can find what you want to watch on PlayTube. On the PlayTube platform itself, you can: Browse videos via keyword or keyword phrase using the search field; Find videos in topics and categories; Filter results by date and popularity; Visit the trending topics tab; View the charts rankings for music videos; View or subscribe to the Popular on PlayTube channel; or Check out the Up next videos on the side (web) or bottom (app) of any video page to see related videos.

Interacting with PlayTube Videos If you find a video that you like, you’ll notice several options below the video player. You can: Give the video a thumbs up or a thumbs down depending on whether you liked it or not; Leave a comment; Reply to another user’s comment; or Like another user’s comment.

Sharing PlayTube Videos If you find a video you particularly enjoy and want to share with others, you have multiple options for sharing it. Email sharing, along with sharing options for every major social networking service. Simply click the Share button for a video and you’re presented with several options for sharing it with friends and family. If you want to simply copy and paste the video page link to share it somewhere, you can do this using the shortened link provided beneath the social share buttons after clicking Share.

Download Videos You Want to Watch Later Since there’s such a wealth of content on PlayTube, the platform makes it easy to save videos you want to watch another time to your Watch Later list or a playlist you created. To download a video to your Watch Later list, just click the Download button and then choose the format you want to add the video.

Is PlayTube Safe? PlayTube is rated as 93% safe with 80% child safety parameter. Still, to improve child safety, one needs to use additional filters over the browser. As this site usually follow a different kind of ads that are not rated as good for kids so to ensure 100% safety it is better to add other filters on the channel. The other idea to improve ad safety is just to add some ad blockers. If we talk about viruses and malware, then PlayTube is found to be 100% safe for your system.

Step by step instructions for taking apart a Philips hair dryer

You can ask your question to the technicians at our service center by calling or writing your question on the feedback form.

You might also be interested in

Philips HP4935 SalonDry Active ION hair dryer

Is the cheapest hair dryer reliable?? Using the Patriot HG210 and Stanley STXH2000 0. Duration: 6:24.

How to open the back cover of your Philips HP4935 and clean the fan blades from hair and dust.

Riparazione asciugacapelli Philips SalonDry Control HP8183

How to take apart a hair dryer Philips salondry control

Building expert

Work at the site

Landscape

Today the popularity of self-service repair of other household appliances is growing steadily. There are also different situations. For example, you need to slowly dismantle a hair dryer Bosch, Philips or Rowenta, but do not have at hand the instruction manual. What to do in this case? Today we will try to give you the following information.

How to disassemble Philips hair dryer?Sometimes after a bad fall or after other mechanical effect this device will not work. A wonderful way out of this difficult situation will be the complete disassembly of the hair dryer. Do you want to know how to disassemble the hair dryer?? There is nothing complicated in this, the main thing is to follow the steps of the instructions.

The first crock. how to disassemble the case. In most models (eg, rowenta pro 2300 and braun 3536) it opens into two identical halves. Before you tighten the screws you must unplug the power cord from the socket to keep safety rules.

The body of the device is typically screwed on simple metal screws. They can be with non-standard heads in the form of a plus, fork or small. So before you disassemble your Philips hair dryer, you should check the availability of the necessary tools.

After disassembling the device you will reveal the internal mechanics of the device which are responsible for its trouble-free operation. If the hair dryer is broken, the cause of the damage will be found in these parts. In addition, some models have additional fasteners in the form of inserts and screws, buried under the decorative pads.You want to know how to disassemble the hair dryer Philips salondry control? This requires that you get acquainted with the interior of the device and take a close look at all the details. The most frequent breakage of many devices is a damaged plug. In case of presence of combustible parts or damages it will be necessary to resolder it.

The main internal element of any hair dryer is the fan. It is driven by the electric motor and draws air through a special hole with grates. In some cases the device failure is caused by clogging of the device, therefore when the saw is available the device must be cleaned accurately.The air passes through the heating element. The wire which is wound on the thermostat. It must have an integral view. If there are any cracks the spiral components must be twisted or soldered. Some models (e.g., babyliss pro) are also equipped with a hood which prevents the device from shrinking together with air long hair and other lint. It can also clog if the device is not working properly.

If when turning on the device in the electric power supply you feel a friction and sparks can be seen, it means that the engine is broken. This problem can be solved by replacing the copper windings and the diode bridge. But it is difficult to repair it at home, so in this case you should call a repair shop.You want to know how to disassemble the hair dryer rowenta brush activ 1 000? The design of this device has a few nuances in comparison with a conventional hair dryer. In order to look at the internal elements and mechanisms at the time of breakage is necessary to perform a few simple actions:

Take off the plastic nozzle from the front part of the device as it will further hinder the disassembly. For this purpose it is necessary to move it smoothly right and left until it is completely disconnected from the device; When removing the plastic ring it is not recommended to use twists and other tools as they can damage the body and leave visible scratches on it; After that you must remove the back piece which prevents the disassembling of the device. At the same time should not make a lot of force, because it can lead to its failure; Modern models of hair dryers of many brands (Roventa, washington, Scarlett and others) do not have on the body of the metal bolts. Fixing the two parts of the hair dryer is carried out with the help of screws. To connect them, the two halves of the body should be pulled apart one from the other, wrapping at the same time.

So you will not have to repair household appliances by yourself buy a good hair dryer. What to choose from all the variety on the market? Before you buy must pay attention to the reputation of the brand, because only well-known manufacturers engage in production of high quality products. Other selection criteria are the power, the number of modes, the function of cold air.

We told you about the main features of the internal organization of the hair dryer, so you do not have to have problems, how to dismantle a hair dryer Roventa brush active and other brands. However, keep in mind that during the self-repair of other household appliances should follow the safety rules and by all means remove the power cord from the socket.

Sometimes this device does not work after a bad fall or other mechanical effect. A wonderful way out of this difficult situation will be a complete disassembly of the hair dryer. You want to know how to disassemble your hair dryer?? There is nothing difficult, the main thing is to follow the steps of the instruction.

The first step is to disassemble the case. In most models (for example, the rowenta pro 2300 and braun 3536) it opens into two identical halves. To comply with safety rules before unscrewing screws it is necessary to remove the electric cord from the socket.

Usually the body of the appliance is held in place by simple metal screws. They can have unconventional heads in the shape of a plus, fork or star. Therefore, before you disassemble a hair dryer Philips need to take care of the availability of the necessary tools.

After opening the device, you will find the internal mechanisms of the device, which are responsible for its smooth operation. If your hair dryer is broken, then the cause of the breakdown will be hidden in these parts. In addition, some models have additional fasteners in the form of latches and hidden screws, hidden under the decorative covers.

You want to know how to disassemble a Philips hair dryer? To do this, familiarize yourself with its internal structure and carefully inspect all parts. The most common breakdown of many devices is a damaged power cord. If there are any burnt or fractured parts it will be necessary to resolder it.

The main internal element of any hair dryer is the fan. It is driven by an electric motor and draws air through a special opening with a grid. In some cases, the breakdown of the device is due to dirt, so if there is dust, you should clean it thoroughly.

The air passes through the heating element. a wire that is wound on the thermostat. It must have a seamless appearance. If there are breaks, the coil parts must be twisted or soldered. Some models (for example, babyliss pro) are also equipped with a limiter, which does not allow the device to suck in with the air long hair and other lint. It can also become clogged if the unit is not working properly.

If a crackling sound and sparks can be seen when the appliance is plugged in, this indicates that the motor is broken. This problem can be solved by replacing the copper windings and diode bridge. However, it is difficult to perform such a repair at home, so in this case you should go to a workshop.

You want to know how to disassemble the hair dryer rowenta brush activ 1000? The design of this device has several nuances compared to an ordinary hair dryer. In order to inspect the internal elements and mechanisms in case of breakage, it is necessary to perform a few simple actions:

  • Remove the plastic nozzle from the front of the device, as it will further interfere with disassembly. To do this, you need to move it smoothly to the right and left, until it is completely detached from the device;
  • It is not recommended to use screwdrivers or other tools when removing the plastic ring, as they can damage the housing and leave visible scratches on it;
  • After it is necessary to remove the rear nozzle-mesh, which prevents the disassembly of the device. At the same time you should not apply too much effort, because it can lead to its breakage;
  • Modern models of many brands of hair dryers (roventa, remington, Scarlett and others) do not have metal bolts on the body. The attachment of the two parts of the hair dryer is made with latches. To separate them, the two halves of the body should be pulled away from each other, simultaneously rotating.

So you do not have to repair appliances yourself need to buy a good hair dryer. What to choose from all the variety on the market? Before buying you need to pay attention to the reputation of the brand, because only well-known manufacturers are engaged in the production of quality products. Other selection criteria are the power, the number of operating modes, the cold air function.

We have told you about the main features of the internal device of the hair dryer, so you should not have any questions about how to disassemble the roventa brush active hair dryer and other brands. However, remember that when repairing small household appliances yourself, you should follow safety rules and be sure to remove the power cord from the socket.

Typical malfunctions

Because of the simplicity of the principle of operation of a hair dryer, its possible breakages are typical and even an ordinary user can cope with them.

Something smells burning

The problem is usually caused by hair, dust or lint on the coil. If the element is dirty, the rotation speed of the impeller decreases, the overheat protection system is triggered, which causes the unpleasant smell. To resolve the situation, it is enough to clean the heater, and then check the performance of the device. If the burning smell is still there, it is worth to call the service center.

The filter is located at the back of the hair dryer, on the side of the air intake

Lack of power

The first thing to do is to make sure that there is electricity in the socket and that the power cord is not damaged. Even if no external damage is noticed, it is necessary to make sure that the current flows through the wire. To do this:

  • It is necessary to disassemble the housing and check the power contacts, using a special tester;
  • The next step is to check the button, to make sure that its pressing is not hindered by internal debris or clumped dust. The uniform color without charred traces will tell about the serviceable work of the contacts;
  • If any damaged connections are found, they should be cleaned with a knife or emery cloth;
  • Connect the unit to the mains, but do not turn on the start button on the unit. It is necessary to bring a tester to the terminals of the button to see if the voltage passes.

If the cable is found to be defective, it should be replaced with a new one. If there is no such a possibility, it is acceptable to use insulating tape to isolate stripped and twisted contacts. If you find faults in the work of the button, you can try to clean the contacts or even disconnect the part, then the unit will start immediately after plugging in the socket.

The hair dryer does not turn on

As in the previous case, the problem may be due to a lack of electricity or a broken cable. Then the procedure is the same as described above. Another possible reason is that the electric motor is broken. The precursors of this trouble are the symptoms:

Philips Salon Dry Control ремонт

  • A small crackling sound is heard during start-up;
  • The motor does not run smoothly;
  • You can hear the smell of burnt wiring;
  • When the fan does not rotate, a humming sound is heard.

If such a malfunction is suspected or detected, it is almost impossible to solve it on your own, because it is very difficult to identify the specific cause. Besides, the cost of repair is expensive, in many situations it is easier to buy a new device.

The performance of the hair dryer decreases

When this problem occurs, it is worth checking the condition of the fan. Most often it begins to spin more slowly due to the fact that hair, dust or other dirt has accumulated on it. Then it is enough to clean debris from the part. If you perform the manipulation periodically, a light cleaning with a toothpick, an old toothbrush or tweezers will help. If it has never or rarely been cleaned, you will need to disassemble the housing to properly clean it.

DC motor

The fan rotates rather slowly

As with the previous option, it is most likely due to hair wrapping around the part or excessive clogging of the housing. You should also clean the device.

Blows cold air

The heating element. the coil. is responsible for heating the flow. This part is one of the most vulnerable in the device, especially if there is no protection against overheating in the technique. If there is no automatic shutdown when the maximum temperature is reached, you need to know what signs tell you that it is time for the device to rest:

  • Onset of burning smell during operation, which may persist even after turning off;
  • The housing is too hot during operation; a functioning unit should not overheat.

To understand the problem, you need to disassemble the hair dryer. If there was a rupture of the heater, it is visible to the naked eye. With a small damage, you can easily fix the trouble, connecting the ends of the spiral and soldering them. If the gap in several places, it is better to buy a new heater, the main thing. the same company as the technique itself.

It is necessary to establish why the part is damaged. If the cause is not understood and not eliminated, the problem will occur again soon.

Dismantling a Philips hair dryer at home

The popularity of self-repair of various household appliances is growing: users tend to save money by calling a master from a service center. This rule applies especially to small appliances. Indeed, the device of such equipment is simple, but sometimes there can be some difficulties. How to disassemble a hair dryer, for example, Philips, when there are no instructions and recommendations? We will try to tell you everything in detail.

Safety precautions

It would seem that there is nothing new and incomprehensible for us in how to follow the basic safety rules when working with electrical appliances. But self-repair of even such a compact device as a hair dryer requires you to be careful. And it is connected just with electricity:

  • Proceed to work only if you have skills to work with electricity. In their absence better trust the professionals.
  • Always unplug the device from the mains before. Use a screwdriver or multimeter for checking.

As well as any household appliance, the hair dryer in one, not zovsim finny ranch, stops working. The reasons for the failure can be different: mechanical effect caused by accidental falling, or a random voltage drawback in the network when you turn on the device. To find out exactly what happened, you need a partial or complete disassembly hair dryer Philips, which can be done on their own with some skills and abilities to repair electrical appliances.

Very important! Before proceeding to disassembly. Disconnect the device from the power grid.

Most models of hair dryers from Philips from the Netherlands can be split into two halves, but for this you have to remove the plastic ring, which retains the two parts. It has four bends, in order to get them in, requires a flat instrument. A flat, thin blade or a sharp knife. Be very careful when operating it. Plastic is characterized by crispness, if the seal is cracked, then this repair can be considered over, you will have to go to the store for a new hair dryer.

Models Philips Salondry Control and Philips HP8656 from the series Pro Care Ion are only different in that the last one. brush-dryer, but the principle of action and design in them practically however. Ion added to the end of the name means that the hair dryer has a function of ionization of the air. This function is necessary for “cleaning” of the hair which does not fall asleep. negatively charged ions (ion) are not magnetized, hair styling is performed without any problems.

On the inner surface of the casing of these models in the front part there are very small but powerful screws. To remove them, slip the tool between the housing and the casing until the gap between the housing and the casing is clear and pull the housing firmly. Now you need to unscrew all the parts of the bracket. There are a total of 8 of these: 2 in the handle, 3 are located under the removable part of the nozzle and 3 are gripping the upper part of the casing. The twist must be prepared at a later time, taking into account the type of screws on the screws. Philips hair dryer disassembly completed.

At the aid of corostuvacham will be os such a video about the original disassembly of the hair dryer:

Reviews

It meets all requirements Excellent functionality, long enough cord, a little bit noisy, but it is understandable, and a powerful motor 220V personally I would recommend for purchase

I am pleased with this model. My wife uses it, she is happy with it, but it is a bit noisy, but it is powerful. The money spent is justified.

I liked it) Earlier I had an old hair dryer only 1600w Decided to buy a new one, first looked for another, but I was advised by a consultant this one, in principle, I did not regret, and draws well, and dried quickly) And not heavy) so there is also ionization, in winter it is very helpful) hair is not electrified almost)

A great hair dryer for the money!Quick drying, quite silent, easy to hold in the hand!hair is shiny!I recommend it))

the product is great quality for a short time of use,very happy with my purchase,lightweight and easy to use,and does a great job with its functions

Great model. It has a good capacity as compared to its other brothers. Very useful for drying long hair t.Very relevant for long hair as through a narrow nozzle very well dry the roots and the ends of hair remain wet (for further styling hair dryer-brush).For the money it is a great option!

I never bought this hair dryer, but I thought I’d write a comment. I had a long time to choose, read reviews and reviews. I’ve decided on this model, it’s perfect: nothing extra, but everything you need. My main disadvantage was that I found it in the store and it was incredibly heavy! Although I understand that the weight is good, so the inner filling of the hair dryer more quality than the lightweight and completely plastic counterparts means it will last longer. But my arm got tired even after just looking at it in the store. And for 15-20 minutes, while I am doing my hair, my hands will break off. I still haven’t decided to buy it despite its great qualities. I will look for a lighter version.

I compared it to a Rowenta 4220. \the noisiness is the same. Similar airflow. But the rovrenta has a wider nozzle and it blows harder. The design is also closer to rovnta. But I chose Philips. Because more functionality at a price of 300-400 more (took for 1200). My wife uses it without attachments. The hair is very long. I like it so far. The removable filter is not clear why it is needed at all. I do not know how ionization works, but the light bulb is on)).

I don’t even know where to start. First of all, it’s just the WORST hair dryer! I used to work at an enterprise where you could say you had to be at work day and night, so I often had only a couple of hours before the directors came to have time to tidy up after a day of running around. Well, often, of course, there were hair is not the first freshness and you need a couple of hours to wash, dry, styling. I tell you, with other hair dryers (which I have not tried! I could have already opened a hair dryer store. I have so many of them piled up ). It was nothing! It’s drying me out, it’s making my hair “dandelion”, my hair is split and falling out. Anyway, it’s creepy.

Apparently, I’ve had a few productive “whining” about my problems with the hair dryer, t.к. On March 8 my boyfriend gave me this hair dryer Philips. It’s very beautiful, it’s gold in black, it’s very stylish. Though it was beautiful, but I thought it was just another piece of junk in my collection of high quality, but not very useful hairdryers.

disassemble, hair, dryer, philips, salondry, control

And it turned out. GORGEOUS HAIR DRYER!

Three modes of air: cold, warm, hot, which allows you to gradually dry your hair (I use a pulling comb), without overheating them, at the end of even after drying I go through the cold air, turning on the lowest cold mode and in addition turned on the cooling function (so that after hot air the pores on the head closed, hair did not fall out, I read somewhere, so the stylist recommended to do). Plus, the ionization function turns on and keeps hair from frizzing like a dandelion. Plus there is an accelerated drying mode. turbo function. which allows you to dry your hair very quickly at all.

Anyway, at work I had time to wash my hair in about 40 minutes, then blow-dry it and have an hour and a half more to drink tea and just relax))) And the hair in general could not even straighten) Here is such a cool hair dryer for me got))))))))

Oh, by the way, it also comes with a volume diffuser nozzle, but my natural volume is not small, so I do not use it, and I do not even know where I have it for so many years))))

| Denial of responsibility | Contacts |RSS