How much to charge
Instructions for use and recommended dosage can always be found on the product packaging. As a rule, the salt reservoir is filled to almost 100%, its volume depends on the model of the device. As you use up the tablets and powders are refilled.
Working in the appliance repair business. Extensive experience in restoring washing machines and dishwashers.
The Bosch dishwasher determines the amount of salt it needs to work properly, depending on the water hardness setting.
How to add Salt to a Bosch Dishwasher to prevent Limescale build up
How much should be poured into the hopper?
The amount of salt, and how quickly it is used, depends on the water hardness. The higher the amount, the faster the substance is used. The parameter varies according to the season, the technologies and substances used for centralized water treatment.
To understand where to pour the salt, examine the inner hopper of the dishwasher. At the bottom you will see a round lid. this is the compartment of the water softener.
You can read the amount from the product’s user manual. The pellets should be poured up to the neck of the tank, filling it completely. The substance will be consumed with each wash, after the process is completed, the corresponding indicator on the panel of the device will light. It serves as a signal to fill a new batch. The question of how much salt to pour into the dishwasher Indexit, Electrolux, can also cause difficulties. The dishwasher brand is not important. It can be a veco technique, Bosch, it is important to follow the instructions.
Why Salt is Needed?
Why Use Salt in the Dishwasher? Water with a high hardness is worse for washing dirt, on the internal parts of technology, there is a plaque of lime and the machine quickly fails. Using the product, you can not worry about your helper in the kitchen.
Any dishwasher has an ion-exchange compartment. The liquid passes through the resin and softens. The ion exchanger contains a special resin. It is granular, resembling small balls with a negative charge. Resin is like a magnet pulling calcium and magnesium particles. The water changes its composition as it passes through the resin. It is the sodium ions in the resin that make it work properly. Over time, sodium ions from the balls are washed out and they cease to play their main function.
The salt, once in the right compartment of the machine, dissolves and saturates the resin with sodium particles. It regenerates and continues to act as a magnet for calcium and magnesium.
How to properly pour the component is shown on
How much formula is needed for one cycle of the dishwasher depends on the quality of your local water supply. In regions with soft water, the salt consumption will be minimal; with hard water, on the contrary, it will increase.
You can ask your local water supply company for advice on how hard the water is in your area. You can do the analysis yourself and will need a litmus paper tester.
If the water in your area is soft enough, you will still need to add the product. It will simply be enough for a long time. How much to put in each model is shown on the data sheet of the dishwasher. The standard value is from 500 g to 1.5 kg.
Why do you need it??
The water in our networks is too hard for “smart” appliances, designed for the European parameters of the water supply. It is impossible to adapt the PM for the domestic conditions. since all the work of this equipment is based on the work with water. There is only one thing left: to change the properties of the latter. to soften it. That is why they produce special salts for the washing machine, 98-99% of which consist of common table salt, the salt we consume in food.
Important! Do not pour common dietary salt into the PMT container. only specially treated salt, otherwise the equipment can break down.
- water softening;
- Preventing the formation of limescale on the parts of the machine in contact with water;
- Preventing streaks on the surface of your dishes;
- Maintaining the ion exchanger in operating condition.
Ion-exchanger. a container with resin, which is source of ions. Sodium ions, supplied by resin, have a charge opposite to that of calcium and magnesium ions. these metals cause increased hardness of water resources.
What the manufacturer offers?
Before using a particular product, be sure to read the instructions. usually right on the packaging indicates how much of it to put in the dishwasher.
Why Salt is Needed
The water used for drinking and household purposes always contains salts of dissolved alkaline-earth metals. calcium and magnesium. The concentration of these compounds is indicative of increased or decreased hardness of water: the higher the concentration, the harder the water comes out of the tap, and vice versa.
In the process of operation of technical devices, the work of which is directly related to the heating of water, the formation of limescale, scale and sediment. They reduce the performance of the units and can cause deformation and breakdown of individual parts and assemblies.
To avoid such troubles, manufacturers have provided for a special compartment, the ion exchanger, which contains a synthetic ion-exchange resin. Its purpose is to soften water by attracting magnesium and calcium ions dissolved in the water.
Passing through the ion exchanger, the water is completely cleared of harmful impurities. But for the resin to renew its ion-exchange properties, it needs the constant presence of sodium chloride, of which 98% of the regenerating salt for the automatic dishwasher is made. The remaining 2% are various chemical compounds designed to give the product a marketable appearance, disinfecting properties and aroma.
The salt softens the water, prevents water stains, limescale and scale formation on the parts of the appliance, extends the life of the unit.
It facilitates the removal of complex contaminants from plates and glasses, resulting in clean and shiny dishes which leave no unsightly stains or smudges.
What products are necessary for the dishwasher
First of all, these are detergents that are directly involved in the process of washing the dishes. It can include powder and rinse aid or tablets. As the manufacturers claim, in a single capsule are all the ingredients needed for a dishwashing cycle, including salt.
Dishwasher salt is also an indispensable item that must always be loaded, and it must be present in any program it runs. This is a special compound, which, in most cases, is 99% common salt, but specially treated for the possibility of using in such devices.
See also dishwasher salt: with what and how to replace it
Dishwasher salt: where to put it and why
The dishwasher is a useful and no doubt handy purchase for every housewife. It immediately frees up a lot of time to devote to your own work. But in order for the technique to work properly and perform its functions quality washing dishes, it needs proper care, including the provision of all necessary household products. Consumers who encounter such appliances for the first time often wonder where to pour salt into the dishwasher, how much to pour, why it should be used and how often these procedures should be performed?
Dishwasher salt: with what and how to replace it
Economy must be frugal! Brezhnev once said so, and many housewives with him quite agree, especially at a time when there is no extra money available, and the salt in the dishwasher ran out. And they have quite a natural thought: what to replace the salt for the dishwasher?? If it’s just salt, why pay a lot of money for it?
So let’s get into it together and explore all the options. Since, just because it is salt, does not mean that it is table salt and absolutely identical.
See also. Dishwasher basics