How to hang a fan on the ceiling. Built -in ceiling fans

Ceiling fans select a household blap fan to the ceiling connection diagram of a street model with your own hands reviews

You someday installed a chandelier yourself? If so, then the solution to the question of how to install a ceiling fan with your own hands will not cause you any problem. Everything to the limit is simple and clear, and the entire installation process of this device can be divided into two parts.

  • Fan fastening to the ceiling. Everything is elementary here, and almost all available fan models can be attached to the ceiling in two ways. exactly the same as the chandelier. In one case, when the device has a large weight, installation is provided for the hook. And in the second situation, the P-shaped or cross bracket is used. In the first version, a hole is made in the stove, into which a special hook is walled up. as an option, you can use an anchor hook on which the ceiling fan is hung. In the second situation, instead of a hook, through special metal dowels, a bracket is mounted, to which the fan is attached by means of two or four decorative screws.
  • Connecting the device to electrical wiring. Here the fan is also few differences compared to the chandelier. You can even say that its installation is easier, since there is no need to break the bulbs into inclusion groups. they simply do not. There are only three wires, which must be connected to the apartment wiring. The first (green or yellow) is grounding. If it is not in the apartment, then the wiring can be insulated and not take into account at all. Two other wires are the phase and zero, which must be connected to the corresponding wires of the wiring.

How to install a ceiling fan photo

It’s more complicated with connecting a combined fan combined. In principle, there is nothing complicated here, if you figure out which wires belong to which device, usually this moment is marked, but if the marks are absent, then everything can be determined experimentally. In addition, each self.respecting and its consumers, the manufacturer configures its devices with instructions, according to which almost every person will be able to connect the ceiling fans.

It should also be mentioned that there may be two circuits for connecting the fan to the power supply network. in one case they are connected to the wiring according to the principle of the chandelier (they need a separate switch), and in the other case they can be connected by the principle of sconces (a separate switch is not for them needed).

The circuit breaker is built into the fan and controlled by the remote control. If we take into account that the remote control tends to be lost, it is better to resort to a connection diagram that provides for the use of a separate switch. in this situation you can use the key and the remote control. It turns out a kind of universal option.

And topics about how the ceiling fan is made with your own hands, I will say a few words about connecting the device with additional devices. they scare many people, especially if the fan is realized in a fully disassembled form, which is very common. Let’s just say. if it scares you, then hire a specialist, and best of all purchase a fan with an electrical circuit assembled. As a rule, such devices for ventilation of the premises have only a couple of wires at the output, which were mentioned above.

The ceiling fan scheme has not changed significantly for many years.

  • Electric motor. Modern engines, thanks to high.quality bearings, can operate around the clock, consuming a small amount of energy and rotating almost silently.

Such a device is connected no more complicated than a regular chandelier

  • Frame. An electric motor is placed in it. The housing is usually made of metal or plastic. High.quality expensive models have a hermetic case, which prevents dust from entering the engine and significantly extends the terms of trouble.free operation.

The blades of such a device can be of different sizes

  • Blades. Usually their amount from three to six. Some ceilings of the original design can have from one to fifteen blades. This is no longer a climatic device, but rather an interior decoration. For the manufacture of blades, a wide variety of materials are currently used: metal, plastic, valuable wood and others.

The fastening of the blades should be reliable

Fastening and bar are also made of metal

  • Barbell. Serves to suspend the device at a distance from the ceiling. Rods of various lengths are used, up to 1.5 meters.
  • Caps: upper and lower. The upper closes the mounting of the rod to the floor, and the lower (below the bar, above the case). hides a terminal block, capacitors, rotation speed adjustment devices and other electrical design.

All technical nodes are hidden behind the overlays

A little story

The first ceilings appeared in the USA, at the end of the eighteenth century. Their drive served as a water wheel, and the rotation of two.lobed fans was transmitted using a system of belts and pulleys.

The electric drive was first used by Philip Diel in 1882. These devices very quickly captured the American market.

Great demand and high competition contributed to the rapid improvement of the structure. The number of blades increased from two to four (or more), a ceiling chandelier appeared with a fan, initially as a set of lamps on the case to compensate for the “running shadow” from moving blades, and later as a full.fledged lighting device combined with the ceiling.

The fan can serve as a real interior decoration

In the first half of the twentieth century, with the mass appearance of air conditioners, the fan on the ceiling ceased to be fashionable. The energy crisis of the late seventies of the nineteenth century again returned the fans to the market of climatic technology, as more economical. Now this type of household appliances is used quite widely.

Read more: roofs of private houses. beautiful ideas, architectural solutions, designs and construction tips

Questions and answers about the ceiling fan

Everyone knows what a ceiling fan is and how it works, but some fan users have questions that need to be answered.

How many air fans move?

The amount of movement of air fans is measured in cubic meters per minute. The more cubic meters per minute, the more air moves the fan and, therefore, the stronger the feeling of cold or heat depending on the selected function. There is a direct dependence between the amount of air and the comfort provided by the fan.

How ceiling fans cool the room?

The use of ceiling fans is not associated with the actual drop in temperature, but with a sense of greater freshness. The air moved by the fans makes users feel cool, 8 ° C below than the actual temperature.

What warranty is provided for the fan?

Our fans have a 15-year guarantee for a fault of the fan engine and for 2 years everything else. The bulbs are not considered part of the fan.

Revolutions per minute. the speed of rotation of the fan and, therefore, is associated with its consumption. The higher the speed of rotation, the greater consumption. In our catalog you can see the number of revolutions for each fan, behind which this symbol follows.

What is the advantage of using fans compared to other ventilation systems?

Ceiling fans provide a pleasant feeling of coolness. Compared to other ventilation devices. useful and cheaper than others. On average, a fan operating at higher speeds consumes less than an incandescent lamp of 100 W and this leads to savings up to 47%, unlike other cooling devices.

How can I install my fan on a slope ceiling?

hang, ceiling, built, fans

If you want to install a fan on an inclined ceiling, you must make sure that the fan is far enough from the ceiling so that the blades do not hit it. It should also be remembered that the maximum angle under which you can install the fan is 20 °.

Can I use my fan all year round?

In our catalog you can find some models with a reverse summer-winter. These models will be marked by this icon. Ceiling fans is an effective way to reduce electricity costs throughout the year. In the summer it can be used independently or in combination with air conditioning, which allows you to save up to 40% of energy. In winter, the fan allows you to better distribute air layers, reducing heat loss and economy to 10% of electricity.

Can I install my fan on the street?

We have models with the degree of IP44 protection designed for external spaces. However, they should be installed under the roof or ceiling for proper operation and maintenance.

How can I control the speed of my fan?

Our catalog determines what type of control system has each fan. Some models with remote control and chains, while others through a wall switch.

hang, ceiling, built, fans

What cleaning and care to my fan are needed?

Water is not recommended for cleaning, because it can damage the engine. Use soft fabric so as not to scratch the surface. If it is not used for a long period of time, turn off the power from the mains to avoid electrical overload of the components. The fan does not need to be lubricated. The engine has constantly lubricated bearings.

How can I install a ceiling fan on a high ceiling?

As experts in the field of fans, we recommend installing a fan at a height of 2.7 meters. For a height of more than 2.8 meters, pipe extension cords should be used, which are available in our catalog as accessories. The dimensions of suitable pipes depending on the height of the ceiling are below.

The length of the extension tube 30cm 40cm 50cm

Can I install my fan on my own or should a specialist install it?

If you follow detailed instructions in our manuals, the installation of the fan should not be a difficult task. However, like any other device requiring an electrical installation, it is recommended that the installation be carried out by a specialist.

How to set up a universal remote control with a ceiling fan?

Within 60 seconds after connecting to the AC network, press and hold the OFF button for at least 5 seconds. The receiver will find a previously selected operating frequency. If the fan is equipped with a lighting device, it will blink and complete the setting several times. If he does not have a lighting device, the work should be checked using a remote control, by pressing any speed buttons to make sure that the fan begins to rotate.

My fan does not start. What should I do?

If your fan does not start, you must check the fuses or switches in the primary and secondary automatic circuit breakers, as well as the connection of terminal blocks. Make sure that the slider switch is in the upper or lower position, and the stabilizing fingers of the engine are removed. If the fan still does not work, refer to a qualified electrician.

My ceiling fan fluctuates. What should I do?

If your fan is swinging, make sure that all the blades are securely fixed with bolts and the bracket is securely attached to the ceiling. If all this looks right, check that the blades are perfectly leveled.

My ceiling fan is noisy. What should I do?

If your fan makes noise, make sure that all the screws on the engine body are tightly tightened. Please note that after installing the fan, an adaptation period of 24 hours is required.

What is the minimum recommended distance from the wall to the blade?

For the uninterrupted operation of your fan and the correct air circulation, we recommend placing the fan so that at least one meter remains between the wall and the blade.

Can all our fans be controlled remotely?

Not. The catalog indicates models that can work with the remote control panel.

Advantages

Flaws

Before you go for the search for a ceiling fan, it is recommended to study the list of the most important parameters on which its effectiveness and reliability depends.

Power

The productivity of the device depends on this indicator. The larger the area of ​​the room in which the installation of the device is planned, the higher the power should be. You can calculate the optimal power of the ceiling fan yourself using a simple formula: the area of ​​the room is multiplied by 2.

Blades

The diameter of the blades. this characteristic affects how much the air will move the device in 1 turnover.

Suitable diameter of the blades depending on the area of ​​the room:

hang, ceiling, built, fans

For rooms of larger area, several devices are usually installed.

Changing the operating modes gives the owner the opportunity to choose the most comfortable conditions.

Most modern models have at least 3 rotation modes of blades, which are quite enough.

For residential premises, including bedrooms, only those devices whose noise does not exceed 30 dB are suitable.

Mounting method and control method

Any device placed on the ceiling should be securely fixed. When choosing a fan, you should pay attention to how exactly the device is attached. the more fasteners parts, the better.

Modern ceiling fans can be controlled using the remote control, but there are devices that turn on and off which is possible only using a wall regulator. The lack of the latter is the need to install wires, which can only be done during the repair.

How to fix a ceiling fan on the ceiling?

The ceiling fan consists of the following key components:

Electric motor. usually a slow.moving single.phase asynchronous machine with several dozens of poles.

The ceiling fan housing is a decorative case “covering” the ceiling fan. Usually made of plastic or metal.As a rule, a slow.moving single.phase asynchronous machine with several dozens of poles.

Fan blades. ceiling fans can have a different number of blades, in the most common models from three to six. However, some workshops make fans that more emphasize the interior features of the rooms than mix air. A decrease in technical indicators in such models is understandable: just some aerodynamic subtleties were sacrificed to the original design. Such ceiling fans can have as much blades: one, and eight, and fifteen. In the manufacture and design of the blades, various methods of decorative decoration and many materials are used: metal, plastic, wood.fiber plate (wood.fiber plate of medium density, English Medium Density Fibreboard), natural wood and others.

Fan fastener staple or barbar. on the slang “iron”. designed to attach the blades to the ceiling fan housing. Usually made of metal.

Fan fastening devices to the ceiling-quite often when installing, use the Ball-And-Socket system (the “ball and nest” system). In such a system there is a plastic or metal hemisphere, which is fixed at the end of the bar. In the hemisphere there is a groove for a metal bracket. The hemisphere is tightly pressed against the bar, and the mounting plate is put on the hemisphere with a bracket (see. rice. “Conference scheme”). This scheme is used in the installation of Rolling Stars ceiling fans.

Some companies came up with modifications of this system. Often, when installing, a J-shaped system is used. In practice, three options are applied:

  • The first option: a J-trick is a hairpin, on one end of which is a thread, and the other is bent by more than 90 °. This installation method is used if there is the possibility of mounting using a spitter connection.
  • The second option: a j-bag is a self-tapping screw, at one end of which a thread with a drill, and the other is bent more than 90 °. This method is used if it is possible to tighten the hook into the ceiling (with or without dowel).
  • The third option: a S-shaped hook, just used on Vortice fans.

Ceiling fan bar. designed to change the distance from the ceiling to the fan blades. Complete with a ceiling fan, as a rule, a bar is supplied with a length of up to 0.5 m long. However, if necessary, you can mount a shortened (up to 0.25 m) or an elongated (up to 1.5 m) bar option. When choosing a bar, it should be borne in mind that the height from the floor to the ceiling fan blades should be at least 2.3 m.

Caps of the ceiling fan. there are two caps on many models: upper and lower.

Decorative elements of ceiling fans. they are reduced to hide the screws, with which the blades are attached to the “irons”. Made of plastic, metal or other material.

Switches, speed controllers, controllers, fan remote controls. distinguish between several types of fan adjustment:

Ceiling fan lamps. they distinguish between ceiling fans:

  • Without lamps and without the possibility of installing any lamp on the fan housing.
  • Without a lamp with the possibility of installing additional lamps as accessories-from 1 to 5 (but sometimes up to 10-12 pieces).
  • Ceiling fans with a lamp in a kit from 1 to 5 (but sometimes up to 10-12 pieces), with the direction of glow up and down. Typically, basements at chandeliers of fans. E27 and E14. It is possible to use energy.saving lamps.

Converting A Box Fan To Ceiling Fan

Cleaning air from volatile organic compounds, smells, viruses, allergens, disputes of mushrooms and microorganisms with just one apparatus!

The new 2018 air conditioners are already equipped with a new generation of R32 and show quite high results to improve the technical indicators of air conditioning systems and a decrease in environmental impact.

Install the blades and lamp

Attach each blade of the device to the corresponding bracket.

Work smarter: save time by collecting the fan blades before installing it.

The installation of the fan on the ceiling ends with the installation of the lamp. pinch the mounts to the corresponding electric drive connector, and then screw the device to the base.

How to install a ceiling fan?

Ceiling fans for households are a necessity, since it is known that they improve heating in winter and cooling in the summer. One of the best things in it is that it consumes much less electricity compared to air conditioners and coolers. This, in turn, also helps in reducing electricity accounts. But in order to make sure that the ceiling fans work as they are designed, it is necessary that you install them correctly.

To correctly install a ceiling fan, here are some of the methods that can help you with this:

  • Keep at hand the tools necessary for installation. They consist of a screwdriver, stairs, hammer, scrap, sickle key and key saw.
  • Make sure the power on the switch is turned off. This will help you ensure your safety during installation.
  • Check the dimensions of your room to get the correct idea of ​​the size of the fan blades that are ideal for your room. You also need to make sure that the fans you buy belong to a famous brand, such as Anchor.
  • It is also necessary to use the UL-Listed output box marked “acceptable to support the fan” if your fan weighs less than 50 pounds when it moves. Otherwise, for additional support, you will need to install a super.powerful bracket.
  • Check your ceiling to make sure that there are no cracks or damage in the ceiling where you want to hang a fan. In the event of any such problems, it is recommended to eliminate any problems that can cause problems in the future.
  • Make sure you hung a ceiling fan with blades at an altitude of 7 feet above the floor. Longer can be used if you have a high ceiling or an inclined ceiling.
  • There should be a gap of about 8-10 inches between the ceiling and the blades of the ceiling fan.
  • Make sure that between the doors, walls and cabinets there is a gap of about 18 inches.
  • Remove the existing box and dirt and make sure that you will not damage the ceiling.
  • Remove the transport blocks from the engine, remove it and save the screws to install lobe iron. In this case, it is recommended to cut the wire up to 6 inches long and remove the insulation by 1/2 inch from the end of the wire.
  • Remove the installation screw of engine couplings.
  • Tighten the descending stem using threaded wires. Also tighten the screw with pliers.
  • Take a canopy and pull the wires and down. At the same time, make sure that the canopy is freely located on the upper part of the engine body.
  • In the slot of the ceiling bracket, place the descending ball of the assembled engine.
  • Make sure the fan is blocked by rotation of the engine.
  • Install the mounting bracket along with the control receiver.
  • Take naked metal beads and place a plastic wire connector to connect the wires and twist it clockwise. This will help ensure the security of the connection. After that, the whole connection must be clicked to the output box. You must also make sure that the grounded and unbearable wires are separated from both sides.
  • Connect the grounding wires from the descending rod, ceiling and suspended bracket using a wire nut. Connect the white wires from the fan marked with the letter “to the engine”, wire nut. Repeat the same for black and blue wires.
  • Connect the black wire from the ceiling and the receiver marked with the letter “ac in” with a wire nut. Repeat this for the white wire. Turn up the connection and insert it into the outlet. Make sure the grounded and non.land wires are separated.
  • Remove the wires from the switch and make sure that the outlet is connected to the black wires, and the grounding wires are connected using green wires. Connect the wires to the outlet and divide the grounded and black wires into different sides.
  • Insert the wall regulator into the output box and screw it. In addition, do not forget to cover it with switching plates.
  • In addition, adjust the holes of the canopy along with the holes for the screws, moving it down to the mounting bracket. Make sure the canopy is tightly screwed.
  • Tightly fix the fan blades, reliably screwing them to the iron blade.
  • Screw the housing assembly into the engine housing. In addition, provide the wires with the upper circuit of the circuit breaker through the hole in the center. Fix it correctly, turning clockwise, and then expand the keyhole around the screws.
  • Synchronize the fan and switch in accordance with the fan model.
  • Check the fan by turning it on and turning it off and rotating it at different fan rotation speeds. For a reverse function fan, make sure that you also tested it.

Following the instructions mentioned above, you can be sure that the installation of the ceiling fan is performed correctly.

Care and operation tips

The fan is a complex electrical device, so its repair should be carried out by specialists of service centers. However, to extend the life of the device and ensure its stable operation for a long time is still possible. To do this, follow a number of recommendations given by masters for the repair of ventilation equipment, and serve the device in time.

  • So, one of the most common problems in the fan is strong vibration and high noise level. In some cases, the device begins to buzz hard and sway menacingly. The reason for this behavior of the device is to unbalance the lobe block. You can eliminate such a malfunction yourself, and the first step will be the purchase of a repair balancing kit, consisting of self.adhesive cargo and weighting clamps.
  • Next, you need to check how reliable the connection between the blades and the rotating hub located on the shaft of the electric engine. The weakened thread should be tightened with a screwdriver or hexagon.
  • The next step will be frozen from the end of each of the blades to the ceiling. If deviations are detected, the problem blade should be leveled, and then tighten the mounting screws.
  • Then it is necessary to alternately put on a weighting clamp on each blade and turn on the device. In the case of a decrease in vibration, you should either attach another clamp, or begin to gradually move the first.
hang, ceiling, built, fans
  • It is necessary to move the clamp along the blade in the direction from the middle to the tail end. Manipulations should be continued until the vibration disappears at all. Then you need to unhook the weighting clamp and strictly glue the self.adhesive metal weight in its place. Balancing of blade blocks of exhaust fans is carried out according to the same principle, except that cargoes with clamps should be smaller.
  • It should also be remembered that the unbalance unit is unevenly accumulated as uneven accumulation of fat and dust on the surface of the blades. Therefore, it is necessary to regularly clean the fan and soot, using any detergent for this.

With a competent choice, proper installation and careful use, the ceiling fan is able to serve for many years, delighting its owners.

About how to install ceiling fans with your own hands, watch in the next video.

Junction box

Bought a box for a fan. This can be done in any store of electrical or household goods. By the way, if you have not yet purchased a ceiling fan itself, we advise you to look here-http: // a-l.Kiev.UA/26-Potolochnye-Wentilyatory. But we will continue.

After determining the installation site, access to power is checked. The location is regulated properly. After that, such a hole is cut out so that a person can put his hand into it to check for obstacles to the box.

In the absence of these obstacles (these can be pipes, communications, and so on.) the box is described on the surface, a hole is made.

If cables with cross section 12 are used in the power source, then products for 12-2 or 12-3 are used to connect. Cables with different sections are prohibited to connect!

The cable is extracted from the distribution box. The ceiling fan can be powered from 120V, but it is preferable to equip a separate distribution box to turn on the device.

Cable 14-2 may be required to turn on the lighting switch and fan.

Cable 14-3 may be required for independent turning on the fan.

If necessary, connectors are used. The cable is distributed inside the case by means of a special hole.

The distribution box is fixed in accordance with the instructions. It should be fixed with high quality, since all working fans vibrate.

If the device is attached at an angle, then it may need a special inclined mount (some models are originally equipped with them). But most of modern models are equipped with universal fasteners, which can be used for both even and inclined surfaces.

Wiring

The cables are connected as follows: white from the fan. to the white of the camshaft, black. to blue/black (if any), green/not covered with insulation. to the green wire.

Each of the compounds is covered with a special insulating lock. A small amount of excess cable remains from the outside. Also, during work, a “hook” is used, through which the device will be suspended.

Installation of the ceiling fan

Today there are several varieties of ceiling fans, both autonomous and combined with a chandelier. The second option is more rational, since it allows not only to improve the microclimate, but also to use the existing wiring. over, the fan and chandelier can work both autonomously and jointly.

See the cost of installing a ceiling fan: from 330 /pcs.

Fan installation sequence

After de.energizing the apartment, you need to replace the ceiling electrical console, which was used for the chandelier. The fact is that such boxes are not designed for the weight of the fans, so you need to purchase a special block. Next, you need to fix the fan on the ceiling. It is attached to concrete bases using dowels or metal mounting brackets with screws. Often, not suspended brackets, but hollow rods, which allow you to adjust the height of the device above the floor, are often used to install the ceilings.

Installation and connection of the ceiling fan.

When installing to suspended or suspended ceilings, it is necessary to tightly fix the embedded fasteners on the main ceiling before installing the decorative ceiling. It is on them that the fan will be fixed. over, between the stretch ceiling and parts of the fastening of the ceiling, you need to leave the gaps, otherwise the vibration of the electric motor will begin to be transmitted to the ceiling, which significantly increase the noise level.

The wiring for the fan is displayed through the central hole of the mounting plate. After assembling the ceiling case (it is carried out strictly according to the instructions), wires are stretched through the center of the dome. Connect the wires of the fan and the camshaft should also be according to the instructions. The fact is that different manufacturers use different color markings for their products, so in order to avoid error, you need to follow the instructions of the manufacturer.

How to Install a Ceiling Fan on a Prewired Ceiling Fan Outlet : Ceiling Fans

The ceiling plate of such a fan is attached directly to its camshaft, in turn, the blades are attached on the ceiling plate. In some models of fans, the lamp and blades are collected on the engine only after it is fixed on the ceiling. The plate is mounted to the box using complete screws.

It is necessary to screw all the details tightly, but without unnecessary efforts, as this can lead to their breakdown. The lamp is connected to the fan through the connector, after which it is securely fixed. It must be remembered that each model has its own constructive features, so when assembling you must definitely follow the instructions.

| Denial of responsibility | Contacts |RSS