How to heat the fireplace with fuel briquettes

Lekto Wood Fuel. Review / Wood Burner / Hardwood Heat Logs

Fuel briquettes for stoves, their pros and cons

Despite the widespread laying of gas pipelines, Russia still has many settlements and places where there is simply no gas. People have to use alternative sources of heat, such as solid fuel boilers. These units work on wood, but recently for them began to produce more modern types of fuel. these are fuel briquettes for furnace heating. Let’s look at them in more detail and find out their advantages and disadvantages.

  • Disadvantages of classic firewood;
  • The composition of the fuel;
  • The main varieties of briquetted fuel;
  • Pros and cons of briquettes for the stove.

After reading the review you will be able to make a choice in favor of traditional firewood or in favor of a more modern briquette fuel.

How to heat properly with briquettes?

You should properly heat your furnace with fuel briquettes for maximum results.

sauna stove

To heat the sauna room, you need fuel, which not only produces a large amount of heat, but also takes longer to burn. This will ensure a stable temperature for a long time. These are the properties of briquettes.

The following tips should be followed when lighting the stove and stoking it:

  • Thoroughly clean the furnace from ash and other fuel residues from the previous firing;
  • on the grate to put some chips, paper, bark or other flammable materials;
  • Then put a small amount of Eurodrops and light the firebox.

You should not use a large amount of fuel at one time, as it will lead to maximum heat output, which is not required by the sauna stove. It is better to put a medium amount, leaving between the briquettes slits for blowing air.

This type of fuel is very good for use exactly in baths. The smells of the essential oils from the eco-friendly wood materials fill the whole room and have a beneficial effect on the health of the visitors.

Stove for home heating

It is convenient to use fuel briquettes for the stove in the house. You can ignite them and do not toss anything else for a long time. There are two ways to ignite Eurofires in the stove for the house:

    The first one is similar to lighting the fuel in the bathhouse: briquette fuel is put on dry wood chips or paper. The fire can be adjusted by blowing.

You can use charcoal or toa briquettes to heat your home. They give a high combustion temperature, but also leave a lot of ash in the ashtray.

The ash from burning wood briquettes can be used as fertilizer in any household plot.

After several heating with briquettes you will be able to evaluate their effectiveness and find out the consumption. You can then compare the amount of briquettes you need and the amount of wood to heat your house.

Manually adding pellets to the stove

One of the easiest and cheapest formats to use such pellets involves manually adding fuel to the stove. For many people, this process seems unnecessarily complicated and incomprehensible, since the first time you can not calculate the exact amount of fuel and time of its addition.

After just a few times you can understand the process and easily control the flame power and “working” temperature of combustion.

You can heat the stove with pellets in a regular stove without major modifications:

  • The easiest way is to install a specialized basket in the stove. It has a fine mesh structure, which prevents burned pellets from falling through into the ashtray. The cost of such products is extremely democratic, so it can be afforded by every furnace owner.
  • If you want to do the work yourself, without buying additional products, you should manually reduce the gaps between the grates. This requires re-welding the grate with a reduction of the gap or install a special grid, which is made of thickened wire.

Despite the wide range of options using a special basket is the best choice, which has been tested by thousands of people. Be sure that you will certainly appreciate the convenience of its use!

Testimonials from users

In this review you will read a lot of user reviews about fuel briquettes. They will tell you everything that awaits you in the process of using this type of fuel.

Bought a small house near Stavropol with my wife. There is no gas in the village, the locals heat with wood. In the process of repairing the old wood stove was replaced by a boiler, and the house was laid pipes and installed radiators. We decided to use fuel briquettes as our fuel. We read the reviews on the Internet, chose the Pini Key briquettes with a hole in the middle. They are distinguished from all other types of briquetted fuel by their improved combustion. Later on I made some comparative experiments and these briquettes burned better because of the little draft in the holes. In comparison with firewood. heaven and earth.

  • No need to grind an axe. briquettes are delivered in neat stacks, I put them in a small outbuilding at the entrance.
  • Produce a lot of heat, the flame is even and powerful. In the absence of instruments to measure the heat output did not work. The neighbors have a similar house, they spent noticeably more on firewood.
  • Easy to get. at least we were able to find a reliable supplier nearby with a cheap delivery.
  • When the roof leaked in the annex, some of the briquettes got soaked. this would not happen with firewood.
  • The density of the material causes difficulties in kindling. fuel billets need to be poured before the previous batch burns out.
  • Reviews on the Internet do not lie. a piece of paper will not ignite briquettes.

If you do not want to bother with firewood, the fuel logs made of pressed wood will be the best solution.

As long as I live, I’ve always been convinced that everything old is better in quality and properties than anything new. Renovated the heating system, made it a two-pipe (read the reviews on the Internet). I put a boiler that can be loaded with regular firewood, coal and wood briquettes. The heating was balanced for a week before the rooms warmed up evenly. These Eurofires, though they burn, but somehow with a strain. as if someone is holding them by the tail. Regular wood would burn like a reactor, to the strain of a chimney. I have not noticed any particular savings, the cost of fuel has not changed. I don’t read the reviews on the Internet anymore.

  • It is convenient to stack. fuel briquettes came on pallets, then the seller takes away the empty pellets and brings new portions of briquettes.
  • You can stack them side by side. they’ll light up and burn through.
  • The minimum amount of ash is formed in the combustion. In the end the wife uses it as fertilizer for flowers, so they grow better.
  • I did not see the promised savings. It seems that I took not the cheapest fuel briquettes, but I did not feel any good. Next year I’ll buy a car of firewood.
  • Kindling from scratch. only with the help of liquid. They just do not want to kindle.
  • In winter there are delays with the delivery. there is always wood in the forest, near the village you can buy any amount of wood, even a carload at any time of the year (including neatly chopped for better storage).

We use briquettes for heating industrial furnaces. We bought a whole car full of them at once and put them in a dry room. Burns great. the flame just buzzes, even though it’s a little different than wood burning. Once you light it, you’ll have time to add more logs. A 92 square foot shop heats up in a couple of hours. They’re a little more expensive than ordinary firewood, but the owner pays the price. Let me tell you a secret: you want good heat, get birch firewood and don’t sweat it. It is not as convenient to store as fuel briquettes, but the heat output is maximal.

heat, fireplace, fuel, briquettes
  • As they say in the reviews, fuel briquettes save you from waving an axe. In terms of production. this is a big plus. You put the fuel in the furnace and go about your business without wasting any more time.
  • The number of rises to the furnace with the transition to the fuel briquettes significantly reduced.
  • They give a good heat, like good quality wood.
  • The high price. I would never bought them in my house. It’s easier to buy a truckload of firewood, which is enough for heating, bathing and barbecue;
  • The impact of humidity. it is impossible to store them on the street.

Eurofuel, though expensive, but copes with its task perfectly well.

Unfortunately, my experience with fuel briquettes was not so clear-cut. Do not believe the tales of high heat output and efficiency, overstated by 5-6 times. Yes, there is some gain, but it is too small. I analyzed customer reviews on the Internet. So, many reviews are based precisely on some ridiculous expectations. Add fuel to the fire from those who have used low-quality products. the market is full of them. Low density, suspiciously low price, no information about the manufacturer. all these are signs of a real counterfeit. My review is the following: if you have extra money, feel free to buy and use fuel briquettes. Otherwise, give preference to traditional solid fuels.

  • Fuel briquettes are an environmental concern. They are made of wood waste, which would have gone to garbage anyway. And the logging is going down. no one is restoring forest plantations.
  • Labor costs for procurement are reduced to zero. no need to get a felling ticket, no need to pull bundles of wood and dry them.
  • Firewood is sold by the car, while fuel briquettes can be bought by the kilo.
  • Many online reviews are blatantly made to order. you shouldn’t believe them. Think about it, firewood and briquettes consist of the same material. wood. There can not be any high heat output (if no additives are used).
  • High price. what is offered for the price of wood will be cheap and of low quality. Good briquettes are expensive.

Nothing is perfect in nature. that’s my feedback.

As long as I remember my parents have always been making firewood. they got felling permits, brought bundles of wood from the forest, dried them and stacked them. In wintertime, wood burns brightly and gives your home a warm glow. Modern technology allows you to make solid fuel from the trash with good characteristics. Only instead of cheapening we get more expensive final product. Producers raise for fuel briquettes to the sky, but they are made out of waste, which has always been sent to dump. Advertisement works, people buy them, but there is no other way out. everyone wants heat, and the neighbor’s parents were fined and given a six-month suspended sentence for unauthorized felling.

Popular types of wood briquettes

We have already talked about the manufacture of fuel briquettes for heating boilers and stoves, as well as their key advantages and disadvantages. It remains to understand what kinds of briquettes are presented on the domestic market.

heat, fireplace, fuel, briquettes

RUF fuel briquettes

This fuel in its appearance resembles bricks of white or wood color (shade varies in a wide range). RUF briquettes are made from dry sawdust using a high-pressure compacting process. The result is Eurofuel, which can be used in any type of stove. Their distinctive feature is the inscription RUF, stamped on both sides at once.

RUF fuel briquettes for furnaces are characterized by high heat production, they are almost one and a half times more profitable than wood. They are easy to load and stack in combustion chambers. Pressed briquettes are not afraid of moisture, but there is no need to expose them to direct contact with water either. This fuel is supplied by many manufacturers. a typical example is the company with the name “Olezhka”. By the way, it also sells many other types of solid fuels.

Euro fuel briquettes PINI KAY

An interesting feature of these Euro briquettes is their unusual shape. they resemble square pencils, of which someone has taken the slate. That’s why they are called “pencils”. In order for it to burn with the release of a lot of heat, a hole is made in it to increase the draft. Pencils” themselves look dark because they have been fired. This process makes them more durable and removes excess moisture.

A disadvantage of PINI KAY fuel briquettes for furnaces is that they cost more than wood, and even more expensive than any other fuel. But they do burn well, and give off a lot of heat. They are also easy to transport and store. Thanks to its shape it is perfect for kindling fireplaces. Some people take them outdoors to use PINI KAY boards instead of firewood.

Simple cylindrical briquettes

There are also very simple fuel briquettes for firewood on sale. in the form of cylinders. They are made from pressed sawdust and small woodworking waste. It’s all pressed under low pressure with a non-toxic adhesive backing, and then the finished boards are shipped to customers. This fuel is cheap, but has one expressed disadvantage. low strength. It easily disintegrates and crumbles, and cannot withstand moisture.

Fuel briquettes made of coal and toa

Toe and coal fuel briquettes for the furnace are made of toe and coal, respectively. Source materials are molded into small cylinders. The fuel can be used for lighting stoves and solid fuel boilers. Coal products give a high combustion temperature, but are characterized by high ash content. As for the toe fuel, it is the most suitable for long-burning stoves, but it also produces a lot of ash.

heat, fireplace, fuel, briquettes

If you have a stove you need something to heat, we recommend PINI KAY or RUF fuel briquettes. They are characterized by convenience and high calorific value, produce a minimum of ash and ensure long combustion.

In recent years the trend is increasingly clear to return to the old traditions, at least in the domestic sphere. Every master wants to have a stove or a fireplace in his house, which he identifies with the hearth. The warmth, coziness and comfort that stoves and fireplaces can give us is incomparable. In addition, private homes often already have a heating system, so the furnace or fireplace is more of a decorative tool to bring peace, tranquility and joy.

To heat up the stove or fireplace we can use ordinary wood or resort to the innovative fuel. In this article we would like to talk about how to heat the stove with fuel briquettes, a modern alternative to classic wood.

How much do they cost??

Price of briquettes for furnace heating depends on technology and material of which the product is made.

  • Alternative fuel Pini-kay type of pine needles will cost on average 8900 for one ton, of birch. from 9500
  • RUF briquettes are cheaper: 6500 from sawdust, 6000 from pine, 6500 from pine and birch, 6900 from birch
  • Nestro briquettes are the cheapest: 7500 per ton. Toyan briquettes will cost the owner of the furnace at 8000, and coal. 9500

You can buy briquettes in specialized stores, as well as on the sites on the Internet. Online purchase will be a little more profitable, since you do not have to pay for consultants and store rent. But in the store you can personally verify the quality of such a purchase, which is very difficult to do over the Internet.

What heats the Bulerian

To learn how to properly heat the stove Bulerian, it will take a little practice and compliance with the manufacturer’s recommendations. The instruction for use specifies the length and grade of wood, the percentage of moisture. If all the conditions of operation are met, the burning time, from one bookmark, increases to 6 hours.

What kind of wood to heat

Wood for the Bulerian is carefully selected, in accordance with the requirements. Strict norms are explained by the principle of operation used in the process of the equipment.

For gas generation it is necessary to create certain conditions in the furnace chamber: high temperature and limited oxygen intake, lack of moisture. Accordingly, if fueled with firewood, the Bulerian will work like a normal steel stove.

There are certain recommendations regarding the quality and type of firewood:

    Kinds of wood that can be used to heat the stove. all hardwoods are good. Do not use coniferous wood. High tar will cause rapid failure of the stove and clogging of the chimney.If you heat the stove with “fruit” wood (cherry, apple, pear, etc.д.), the heat output will be low, and the fuel consumption will increase accordingly. It is recommended to heat the firebox with hard wood species: oak, acacia, etc.д.

Wood is the best fuel for the stove, but if necessary, it is allowed to use alternative types of energy.

Can coal be used to heat the stove?

According to the manual, it is strictly forbidden to heat with coal alone. What is the problem? The stove has no grates. convection tubes pass at the bottom of the furnace chamber. Coal, when burning, generates a lot of heat, which can cause burned metal.

It is correct to heat the stove Bulerian lignite, adding it to the wood. Some modify the furnace, installing grates. Changes in the design are made at your own risk, depriving you of service under the warranty.

Can you heat with used oil?

On the Internet there are many options on how to remake the furnace for used oil. But it is worth recognizing that the fuel for the Bulerian, as written in the instructions, can not be waste oil. The efficiency of the boiler depends on many factors, one of which is the presence of ash pad.

Open fire leads to the rancor of the lower pipes and the failure of the furnace. Therefore, it is not allowed to use waste oil as fuel.

How to Use a Charcoal Chimney

Can briquettes be used to heat the stove?

As practice has shown, to use toya briquettes in the stove, is the best option of all fuel types recommended by the manufacturer. In the process of processing, moisture and air is removed from the briquettes, which increases the calorific value and heat output.

The only disadvantage of fuel briquettes is their relative rarity. To buy the necessary batch, you will need to use the Internet. Various companies offer briquettes, with a minimum batch of several tons.

Can be heated with sawdust, wood chips and bark

Of course, the stove Bulerian is better to heat with wood, but if necessary, you can use sawdust, wood chips and tree bark. The combustion process is carried out as follows:

    The kindling is carried out with firewood.

The use of wood waste helps to significantly reduce heating costs.

Is it possible to heat with pellets

Any kind of solid wood fuel is suitable for the Bulerian, and pellets are no exception. But to use pellets it is necessary to install a special grid. Otherwise, the kindling takes place in a similar way to the wood waste.

To begin with, in normal combustion mode, the wood is melted. After pellets are sufficiently burned, they are poured in. The furnace is set in gas generation mode. For the furnace, it is better to choose high-quality pellets made of wood. It is necessary to refrain from using pellets based on vegetable waste.

What can heat the fireplace

Of course, the classic fireplace, the buyer does not associate with anything other than wood. But, modern conditions of life dictate their rules and in addition to aesthetic beauty of live flames, the consumer also requires that the combustion of fuel, released the maximum amount of heat, and the period of operation of a single charge of wood, was as long as possible.

All this led to the fact that for fireplaces began to produce long-burning wood. pressed fuel, the structure resembling pellets, but having a larger size. Some owners use coal for heating.

Is it possible to heat the fireplace with briquettes

Pressed wood, Euro firewood, briquettes. all this is the name of one type of fuel characterized by good heat dissipation and a long burning period. Briquettes are made from crushed wood of different species, coal, toa.

Topping eurolight, has several features:

  • Wooden fuel briquettes are good fire and within 2 hours when fully loaded into the hearth, maintain a steady burning.
  • When burning with toasted briquettes, you need to start with a small amount of firewood to let the pressed logs burn well. The combustion time of eurolight toa is up to 4 hours.
  • Heat, while burning any type of briquettes, almost 30-50% more than when burning wood, while the burning time Eurogrove longer, almost twice.

Comparing briquettes and firewood, take into account the process of producing pressed fuel. During the processing of crushed raw materials is completely removed moisture (specific humidity does not exceed 11%). Small particles are pressed so that between them does not remain voids, which ensures uniform combustion without sparks.

In the production process, resinous impurities are removed, so it is allowed to stoke briquettes of coniferous wood. Heat output of pressed softwood fuel is less than that of hardwood analogues. When burning, there is a minimal emission of smoke.

Choosing, what to stoke a fireplace, wood or briquettes, take into account one more feature: the visual and aesthetic value. A full flame, a smell and a characteristic crackling are only possible with chopped wood.

Whether it is possible to stoke a fireplace with coal

Coal is a type of fuel with a specific combustion feature. In fact, the maximum heat output occurs during the smoldering period of the fuel. At the moment of smouldering, the amount of heat released is several times greater than in the case of wood burning.

Burning charcoal requires more air. Traditional firebox design, not suitable for this purpose. It will be necessary to increase the height of grates and replace them with cast-iron ones (steel will simply go rancid).

To stoke coal can be only after the modifications of the furnace, in this case, the traditional fireplace, will practically become a stove. will lose its decorative function. If you need fuel that can provide a long heat output and quickly warm the room, it is better to stoke the fireplace with fuel briquettes made of wood, toa.

What kind of wood to use for a fireplace

The best firewood is made from hardwood. Beech and oak are optimal for the firebox, acacia, aspen or any fruit wood can be used.

Regardless of the choice of firewood, there are several requirements: to be dry, not rotten. Some types of wood are not suitable for the firebox, others have a high heat output, they burn evenly without causing sparks.

When selecting the right wood for the firebox, consider the characteristics of combustion:

  • Beech and oak are considered “luxury firewood. Burning evenly and brightly. During combustion, there is a pleasant and even crackling sound.
  • Beech-wood, in terms of its heat output, has virtually no equal. For even burning, it is necessary to dry logs well.
  • Similar characteristics distinguish oak firewood. The only disadvantage of oak, its relatively high cost and the difficulty of splitting the logs. Oak firewood burns for a long time and produces almost no smoke.
  • Fruit tree species. heated with apple, pear, and other firewood. The advantage of fruity wood is the pleasant smell that enters the room when it burns. It is customary to use firewood from fruit trees to heat living rooms. Over time, the room develops a strong wood aroma.
  • Poplar and basswood:
  • Poplar is heated solely for decorative purposes. Firewood burns quickly, but gives off little heat. To heat the room with poplar, you will have to constantly put up wood at intervals of 1-1.5 hours.
  • Approximately similar situation with linden firewood. Billets burn dimly and quickly, give off practically no heat or smoke.
Table comparing the heat efficiency of firewood
Type of wood t of combustion, °C Heat transfer efficiency, % (max: 100%)
Beech, ash 1044 87
Hornbeam 1020 85
oak (winter) 900 75
Larch 865 72
Oak (summer oak) 840 70
Birch 816 68
Fir 756 63
Acacia 708 59
Lime 660 55
Pine 624 52
Aspen 612 51
Alder 552 46
Poplar 468 39

Long burning wood is oak, acacia, maple and beech. Poplar, aspen, and basswood burn quickly. Birch burns even with a high percentage of moisture.

What you can not heat the fireplace

The type of wood you choose influences how long the fireplace lasts and the appearance of the firebox, especially if it is closed with heat-resistant glass. In addition to the recommended types of wood (described above), there are types of fuel that are categorically not recommended to burn in the fireplace:

The choice of the boiler on wood briquettes

Choosing a boiler for long combustion on pressed wood briquettes can be difficult, because of the large range of products offered. In the domestic market there are models, made in Russia, European countries and neighboring countries.

To facilitate the selection of equipment, all the proposed boilers for burning briquettes can be divided into several categories, according to the territorial feature. the country of manufacturer:

In the offered list are listed the boilers for burning briquettes, using the principle of pyrolysis combustion. All models are invariably popular, which is clearly proved by sales statistics.

What is better to heat the boiler. with wood or briquettes

As practice shows, the domestic consumer is in no hurry to change something. Therefore, firewood has been and remains the most popular type of fuel.

Solid fuel boiler on wood briquettes, despite the good thermal performance, remains rare in most regions of Russia. But gradually the tendencies are changing.

To determine what to heat a solid fuel boiler, firewood or briquettes, it is worth considering what characteristics distinguish the pressed fuel:

    Relative humidity. the figure does not exceed 8-10%. Humidity of firewood, even after two years of drying, is not less than 20%.

In all respects, the use of briquettes is more advantageous. It is worth taking into account several other parameters:

    Technological results. combustion is characterized by stability and uniformity. With normal draft characteristics, the flame is bright yellow in color. In the combustion process, no soot is emitted. The chimney heats up quickly, there are no temperature fluctuations. As a result of these features, there is a decrease in condensation.

| Denial of responsibility | Contacts |RSS