Checking the quality of the installation
To find out if the work of replacing the needle in the sewing machine was done correctly, you need to make a test stitch. To work, you should take a small piece of unnecessary material and try the machine on it. If the stitch came out ugly, with obvious irregularities, skipped stitching, different stitch lengths, then the needle was installed incorrectly. If the stitched fabric is even, without flaws and inaccuracies, then there is no need to change anything, because the work was done successfully.
Do not leave the wrong needle in the machine, as you can not only damage the fabric or product, which is sewn, but also break the needle or damage the machine itself. To avoid negative consequences, it is important to immediately change the position of the needle, namely:
- the machine is completely de-energized;
- screw is loosened by hand or screwdriver, the needle is set in the correct position;
- If the thread begins to tear during the quality check, adjust the needle position by turning it slightly to one side or the other;
- When the needle is installed in its place, you need to clamp the screw;
- Check the quality of your work once again.
Important! You will need to adjust the position of the needle until the stitch is perfectly flat and beautiful.
How to insert a needle into a sewing machine?
Sewers and craftsmen are often faced with the problem: “sewing machine does not sew. A common reason why the machine does not work well is that the needle is not inserted correctly.
Sewing machine. a capricious tool, every single detail in it, even the smallest, has its own mission and is an important little link in the great mechanism. Do not sew with the wrong needle, since the needle is probably the most important node.
Many brands of sewing machines on the market. Brother, Bernina, Janome, Juki, Aurora and many others. There are sewing machines that were produced in the Soviet Union and in the 90’s (such as Chaika, Singer). No matter what kind of machine you have in front of you now. the needles in your helper are always inserted the same way. Yes, a very important condition. you need to know which side the needle is inserted. For those who are new to sewing, this is the very first question that needs to be solved.
Easily Inserting Industrial Needles
The needle is a delicate and very fragile tool, but it is this small part that carries a lot of stress during the sewing process. The way the needle is inserted in the sewing machine determines the quality of the stitching (as does the right thread and fabric).
A few rules for threading the needle in the sewing machine:
1.The long groove on the needle when installed faces the direction of the thread guide, with the flat side of the bulb facing in the opposite direction.
2.The needle must not touch the sides of the needle plate (down. up needle).
3.You can’t make a round flask into a flask with a flat side on its own.
4.You need to use specialized needles for overlock and flat sewing machines.
5;Needles for household sewing machines are not suitable for industrial machines.
By following these rules when changing the needle, you will get quality stitches and enjoy sewing.
You are new to sewing and are puzzled about how to correctly insert the needle into the sewing machine? This is a very important skill indeed, since not only the quality of the overall work depends on it, but also your safety.
You have to change the needle quite often, and not just because of some defect. If the craftswoman sews a lot and uses different materials, the needles should be selected according to the type of fabric and thread thickness. Mistakes made in doing so can cause broken and malfunctioning needle stroke, poor quality stitches or thread breakage. To avoid this, you need to carefully follow a certain algorithm of actions.
How to Insert a Sewing Machine Needle
Replacing the needle in a sewing machine
The quality of work on household equipment depends on the timeliness of the replacement of one of the tools, which has the greatest load. Replacement is recommended after a few hours of continuous work, sewing two or three products. Therefore, how to change the needle in a sewing machine correctly, is no less important than the full adjustment of the equipment.
Preparation for changing the tool is the same as for installing it. After that, you should loosen the screw to take out the used needle. You can do this with a flat-blade screwdriver. While doing this, the used tool should be held with the other hand.
Check the manual for the location of the groove. At the same time, you can check how sharp the needle is: the sharp end should shine.
Insert the needle as far as it will go. Secure it by tightening the clamping screw.
How to change a needle in a sewing machine
Usually, the manual included in the package contains a detailed guide to installation and needle selection, but it happens that it is lost.
For those who use electromechanical models of sewing machines, and they are now presented in a wide range of companies Janome, Singer, Brother and others., it is important to unplug the sewing machine before changing the needle. After that, it is necessary to perform the following:
- raise the needle clamp to its highest position;
- with your hands or with a screwdriver to unscrew the screw;
- Remove the old needle (if installed);
- put a new one in its place;
- Hold it in place and tighten the fastening screw.
It is important to know which side to insert the needle into the sewing machine.
How the needle is designed
A sewing machine needle is a simple but ingenious invention that has not changed in nearly two centuries. Due to its design, it easily pierces the fabric and guides the thread into the hole, then returns. So you get a loop on the opposite side of the material.
Knowing the structure of the needle and the principle of operation is necessary in order to understand how to properly and which side to install it. The design of this part is as follows:
- Thicker top. This is the bulb that attaches to the needle holder.
- Stem. The main part, along which from top to bottom runs a groove for the thread.
- Point. The working part where the hole is made is the eye. It also has a small groove on the opposite side from the one on the pin.
Such a device allows the needle to pierce and guide the thread through the material with ease. In order for this to happen without problems, the long groove located on the rod must be of adequate depth and the point must be well sharpened.
How To: Change Needle on Sewing Machine (Sewing for Beginners)
How to insert a needle correctly into a sewing machine?
For quality work on a sewing machine, you need to become a bit of a technician yourself. Installing the needle, threading the upper and lower threads, cleaning the device all fall on the shoulders of the owners of the machine. However, in case your sewing helper does not work well, the thread breaks, the needle breaks, it is much more difficult to cope on your own. Private Masters Association Needle will quickly and professionally help with any problem, perform preventive maintenance and repair sewing machines.
How to choose the right needle?
The enormous number of needles on sale makes it very difficult to choose the right one, even for professional seamstresses. Most needles resemble each other and only under a magnifying glass can you see the different needle points, rods, and needle ears. The design of the needle is set up so that for sewing any piece or thing, each of these parameters makes a difference. What to look for when selecting a needle:
Owners also need to pay attention to the manufacturer of quality needles. Some of the best are considered Japanese Organ Needles and German Schmetz. A needle change is made after each major sewing project is completed, which means that the point of the seamstress’s tool must always be sharp and the eyelet intact. Considering these points when choosing and using sewing needles, the user of the machine will always be satisfied with the result of sewing.
Read more about the needle
Needle in a sewing machine. the most important detail. Almost all parameters in the hook design are adjusted according to its operation. Despite its fragility, the needle experiences the greatest dynamic loads. Type of needle, its condition and position affect the quality of stitching. That is why each seamstress needs to know more about it than the machine as a whole.
Needle is selected according to the type and thickness of fabric. The thread is matched to the thickness of the needle. I have a detailed correspondence table in my book, which comes as a gift with a subscription. You should also be aware that thread and needles of the same number can vary in quality. Modern needles, for example, are much stronger, glide better, and dull less than “Soviet” needles. Industrial needles of those days were even worse. In my video tutorial, I show that I use industrial needles. These needles are left over from Soviet times, when there were not only machines, but also components for them. I had to get, anywhere and anything as long as the awl. And it’s all awl. I’ve been in the habit of saving money ever since. I’m not going to part with it. I will share it with you.
Needle, which blunted, I sharpened on zero-grit sandpaper, it greatly prolonged its life. On new fabric and especially knitwear (needles for knitwear do not always justify itself) I put only a new needle, and then use it either to repair old things, or when sewing more loose fabrics. If the needle is still working, but has already worked quite dull, I do not throw it away, because it can always be to repair a bag, a working bag for dacha, something like this. On such things the needle blunts instantly. Why ruin a new needle? And then I throw it away. Thus, I use my needles very sparingly. I must say that modern needles, if they do not break or bend at the thickness of the seam, they do not “run out” at all. I have never yet sharpened a modern needle. I will say that this “number” may not pass, and the stitch will be with skipped stitches, if the needle is shorter. Sharpen it flat, almost horizontally, so the tip does not shorten. After sharpening, lightly sand against the woolen cloth. It is not difficult.
Do not sew with a crooked needle. Grasp the needle by the bulb and turn it quickly against a dark background, if the point of the needle remains at one point, it is not crooked. Crooked needle is difficult to straighten, it is better to take another.
Blunt needle causes knocking in the machine, pulling fabric into the hole of the needle plate, looping threads from the bottom, pulling threads from the fabric, uneven stitching, and also breaks through the fabric fibers. By the way, the author of the book “Repair of household sewing machines” A. И. Zyuzin “permits” needle sharpening.
Rusty needles should not be used! They spoil the fabric, especially thin and dense.
The surface of the needle plate must always be smoothly polished. A rusted plate, but cleaned with an emery cloth should not be used, because the rust pits will hinder the progress of the cloth. It happens that from systematic needle strokes, the needle plate bends in the middle. The deformed plate must be straightened out.