How to put a coal filter on an extract Midea. Positive and negative properties

Than coal filters for hoods and ventilation are good?

The necessary item in any kitchen is the kitchen hood. The purpose of the exhaust device to rid the room from accumulated odors, purify the air and create a favorable atmosphere in the room.

For maximum functioning of the hood, a coal filter is required. In this article, we will find how to choose the right coal filter for hoods, and what types of filters exist.

Purpose and types of filters, differences and prices

There is a wide variety of kitchen hoods. Each hood can be equipped with two types of filters:

Grutal cleaning includes fat filters, which delay the garge and soot, as well as small particles. Their main goal is to protect internal details, the walls of the duct and the hood itself from fat and soot.

Fat filters can be both one.time and reusable use. Disposable are made of acrylic and non.woven. Reusable fat filters are made of steel and aluminum.

There are several types of fat filters on sale:

  • Acrylic filter. simple and reliable in maintenance. You can buy it at a price of 93;
  • Paper filter. it consists of non.woven, disposable. You can purchase it at a price of 255;
  • Aluminum filter. reusable is conveniently washed, consists of oral aluminum. It requires careful care. ;

Fat filter for hoods is recommended to rinse in time or replace it. If this is not done, then the load may intensify on the hood engine and as a result of this its performance will fall. Many fat filters have a replacement indicator, as a result of this you can easily understand when the filter must be replaced. To the menu

Description of the fat manners

There are several groups of devices for filtering fumes in the kitchen. The principle of their work is based on the absorption of fat and particles of soot. For this, the composition contains synthetic fabric.

It is able to perfectly clean the air streams that suck in the fan.

  • flat elements for disposable use;
  • aluminum nets, divided into many small cells and dressed in a hard frame;
  • similar products, but made of stainless steel.

Replaceable models resemble a thin carpet in appearance. It is customary to use them in small in size built.in hoods. Synthetic fiber or paper are used for cleaning. In the first case, it can be a synthetic winterizer, acrylic or non.woven. Maximum such a product can last 3 months, but with care. This means that the device should operate no more than 2 hours per day.

Aluminum models

Lattices made of aluminum or stainless steel are adjusted to the dimensions of the household appliance. They are good because they are suitable for prolonged operation. They act according to a simple principle: the smallest cells of the nets that are placed in the frame are delayed by flying particles.

Several advantages and disadvantages of such products can be distinguished. For example, a disposable fat filter cleans the air well, which protects the surface of the canal and fan from sticky fat and plaque. The disadvantage can be indicated that it is enough for a short time. The problem with the elimination of any pollution can only be solved by replacement, washing and drying the material do not benefit. The cost of the cleaner depends on its size. The minimum price is at 150 p.

Change parts

Exchange inserts are sometimes suitable for universal use, that is, they can be installed in any ventilation devices where these elements are provided. A long period of use is characteristic of stainless steel components and aluminum.

According to technology, they can be cleaned with water with the addition of various detergents. But when compared with the replaceable version, the new traitor with the mesh structure will cost at least 2 times more expensive. At the same time, it is characterized by a rough air purification system. After about a year of use, a drop of fat covers the surface of the case. You can also notice them on the outlet channel and internal cavities of the device.

Coal cartridge

Its task is fundamentally different from the purpose of fat filters. Here, a plastic cartridge is taken, where activated coal granules are laid out. Such a component cleans the air from any harmful fumes, removes the smallest particles of fat and soot.

  • With the help of him, it is possible to get rid of the exhaust gases, the smells of food;
  • After processing the absorbent, the air can again be fed to the kitchen;
  • Products can be used for fine air purification, which in direct.flow devices is the following step in processing.

Carbon powder after use is not subject to cleaning. To restore the functions of the element, the cassette is changed. Cartridges are customary to use in island models in which air is not provided to the street.

In appearance, filters filters are created in the form of disposable cassettes or peculiar rugs. The cartridge is round or rectangular, and a hole has been made in its center. Carbon elements can serve up to six months. This period decreases by 2 times if a person uses it intensively. There are cheap products, the cost of which starts from 200 r, as well as expensive ones. several thousand will have to be given for them.

It must be taken into account that the first enemy of the filter sorbent is the humidity that is present in the air. To increase the service life of a coal cartridge, the kitchen should be ventilated after cooking. Also you need to leave the fan on for 15 minutes to dry.

Cleaning or replacement of fat filter

The fat filter must be cleaned every 2-3 months, depending on how often you use the hood or when a message appears about this on the control panel.

  • Disable the device from the network;
  • Open the wings;
  • remove the filter, pressing it to the back wall and at the same time pressing down;
  • Rinse the filter. this can be done carefully using a soft detergent or in a dishwasher, in an upright position;
  • For manual washing, you should not use soda. it leaves brown spots; It is also not recommended to choose a high.temperature regime in the dishwasher. at high temperatures, aluminum oxidizes and darkens;
  • dry the filter at room temperature;
  • install the filter in place so that the handle is on the prominent outer side;
  • Close the wings;
  • turn on the hood and control the presence of extraneous sounds, vibration; If you have not installed the filter correctly, then turn off the hood and reinstall the filter.

The filter replacement is performed according to a similar algorithm.

Installation of a new coal filter

The coal filter cannot be washed and restored. It needs to be changed approximately every four months or even more often, if you intensively use hood.

  • Disable the device from the network;
  • dismantle the fat filter;
  • disconnect the coal filter using special latches;
  • Put a new filter and fix it with latches;
  • turn on the hood and control the presence of extraneous sounds. if you put the filter incorrectly, vibration will be heard; In this case, it is necessary to reinstall the filter correctly.

Rules for choosing a coal filter for hood

Before purchasing hoods, you need to consult with a consultant on the availability of replaceable cartridges in wide sale. When buying cassettes, pay attention to the recommendations of the manufacturer. Coal filters are made so that many types of hoods are suitable for many. But some models are inserted only into one type of equipment and are not suitable for another. This often applies to new filters that are only released on the market.

Sometimes users insert soft cloth elements into the hood, which differ in low cost. Gross violation leads to premature wear of the motor and fan. In the extract passport there are correspondence parameters that must be taken into account when choosing a cleaning cartridge.

Popular manufacturers

Firms that produce kitchen.cleaning hoods produce different types of coal filters. Companies offer devices for standard hoods of rectangular shape and for angular and wall options. Many models are equipped with mesh that capture fat, number several coal cleaners in the kit.

In such equipment, the filter performance corresponds to the productivity of the fan or slightly higher than this characteristic. Famous manufacturers always indicate the life of coal barriers, which must be taken into account when installing them. If the hood is capable of processing 250 m3 of air, and the filter can skip 500 m3, the cleaner must be changed in six months, and not three months, as indicated in the instructions.

Carbofil filter media with immobilized activated carbon

Elikor Greek products, Spanish Cata, Italian Elika are sold in almost all stores. High quality and affordable cost made them popular. Coal gaskets change once every 4 to 6 months, even provided that the hood is used with constant load. Good work is manifested in the fact that there is no fat plaque on the neighboring walls and objects.

Folter

The company has its own production base for the release in a large assortment of coal cleaners. The entire proposed lineup complies with the accepted standards determined in the GOST and technical conditions. Most samples are universal and suitable for equipment of various companies.

  • Ion exchange resins in the form of synthetic compounds of the macroporic structure that provide air purification;
  • chemorosorbents that absorb organics on their own surface;
  • Activated carbon.

Folter products work reliably and efficiently for a long time, it changes conveniently after the expiration of operation. The average duration of functioning without loss of quality is 5 months. Fyas-s and fyak-s models are popular, which productively clean the supply flows from smell. Average

Crown

The German manufacturer produces high.quality kitchen hoods. Each unit is equipped with a filtering element of the crown that cleanses the air of waste gases and oily impurities. The hoods of the hoods are made sealed, so the flows fall directly on the treatment with.

Filters are placed in industrial and household ventilation boxes, in production workshops they 100% remove toxic impurities, unpleasant odors, gaseous pollution and chemically aggressive pairs.

Compact devices are made tubular, panel type. They guarantee productive cleaning, while pressure losses remain minimal. From hard membranes there is no emission of coal granules. Spare elements are not included in the sale package and are purchased if necessary.

The life is about 100. 125 hours with constant use. Models are equipped with an indicator, which shows the degree of pollution and the need to replace. Combined with units Slim 600 Inox MB, Janna, Kamilla (1 Motor), Elma, Freya, Betty, Helen, Jasmin Push Button, Ester, Mara Push Button, Sabrina.

Jet Air

Italian products are in demand due to energy efficiency and high performance. Filter elements are suitable for units manufactured by Jet Air and are used in another ventilation equipment. The material of the frame is metal or plastic. It is recommended to change filters within the set period, t. to. The accumulated pollution can subsequently draw back into the kitchen room.

  • F00169/1S. The sample has an ergonomic performance, combines with many varieties of cleaning units for the kitchen.
  • F00307. The device operates for 4. 6 months, the charcoal filter is installed and removed with your own hands simply and conveniently.

The company produces treatment elements for kitchen devices and for installation in the filter box of the ventilation system (at the beginning or end). Such devices use strong granules that are not eliminated during operation. Elements are processed by an supply and recirculation flow, reduce the level of gaseous impurities and pungent odors.

Hans

Hans manufacturer from Italy produces high.quality coal cleaning cassettes. Filters do not belong to universal models, so before purchasing you need to clarify the consistency of a specific hood from the consultant. The high price is explained by the quality materials used in the composition of the element.

The most popular buyers are the KF17203 model. A copy of 175 mm with a diameter of 175 mm is suitable for hoods by OSP622H, OTP616WH, OSP622WH, OTP627WH, OTP6221WGH, OTP616IH, OTP6651BGH, OTP627IH. The service life is 6 to 12 months with the regular inclusion of exhaust equipment.

A corrugated polyester is used as a membrane, in which particles of activated carbon are built. The barrier collects solid impurities on the surface, and intersperses are cleaned of gaseous substances and unpleasant odors. For non.standard equipment, the company performs filters to order.

Popular models

To choose a suitable model of a coal hood, it is necessary to take into account not only its power and size. The design remains important, as well as the availability of additional features: sensory or remote control, backlight, voice sensors, several operating modes.

Let’s figure out how significant the influence of the quality and brand on the cost of exhaust devices will be.

Inexpensive, but high.quality hoods are produced by the manufacturer Korting: a flat built.in hood with a carbon filter with a capacity of 275 m3 per hour will cost about 5 thousand.

From popular models, pay attention to a more stylish hood with the removal from Krona with elements of steel and glass, 5 modes of work and electronic control: this option will cost you about 11 thousand.

familiar brands release expensive models of coal extracts. One example of a combination of style and functionality is the HotPoint-Ariston suspended hood with the air removal mode and recirculation, equipped with a coal filter. At a cost of 18.5 thousand, such an extract provides air purification at a power of more than 760 m3 per hour. For comparison: Gorenje extract with a capacity of 630 cubic meters you buy for 27 thousand.

Other models and brands are no less in demand in the consumer market. Bosch, Hansa, Siemens and many others are popular. Read about the features of their work in the reviews of coal hoods.

Reviews

Sergey, Krasnoyarsk: He always preferred compact, but powerful hoods. and was even ready to endure excess noise, as health has always been a priority. I decided to update the kitchen. and at the same time I looked at the new technique. I was pleased that modern models are already more functional, and it is now possible to ensure high.quality air purification without sacrificing your own comfort.

I stopped the choice on Hansa hood with a coal filter operating in recirculation mode. At a relatively inexpensive price, the performance of such an extract exceeded all my expectations: the air is cleaned in some couple of minutes-and, most importantly, this device works much quieter in its predecessors. Pleasantly surprised that so many advantages can be obtained at adequate value.

Anna, St. Petersburg: changed her place of residence-and the hoods, as luck would have it, was not in the kitchen. I cook a lot, so I could not do without it: from past experience I can say that natural ventilation rarely contributes to the rapid removal of smells from the apartment.

Since I did not want to completely renew the kitchen, I firmly decided that I would spend more, but I will find an extract that I could enter into an already installed headset. Fortunately, I found not only suitable in size, but also a sufficiently powerful hood with 4 work modes from Bosch. It cost me about 25 thousand, but these costs cost it: very convenient to use and looks great.

Now it has become much more convenient to cook, since the smells of fried foods no longer have time to spread throughout the kitchen.

This is not to say that the hoods of the coal type are intended only for a certain category of users: such a technique is suitable for both large and cramped kitchen. and will solve the problem with air purification, regardless of how you are used to cooking.

Thanks to new technological solutions, the technique with coal filters is increasingly improving, but for now. look at stylish models in the photo of coal hoods for the kitchen, and also devote time to watch the video about the features of care for them.

Varieties of filter elements

The first hoods for the kitchen were made without any filters. a hinged metal umbrella equipped with an axial fan, connected to the outlet through a rectangular canal. With the removal of soot and fats to the house of the household appliance, but at the same time was covered with sticky dirt. it was often necessary to wash the case, impeller and grate of the air intake device.

The current suspended, island and built.in hoods are deprived of this drawback, since they are supplied with filters of various types:

  • Fat interchangeable elements on acrylic and paper basis;
  • fatty metal lattices;
  • coal cassette inserts. cartridges;
  • Combined disposable elements.

Recall that there are 2 types of kitchen hoods. flowing and recirculation. The former throw out the retractable air inside the ventilation shaft or directly to the street, the latter are made without a withdrawal and direct the cleaned stream back into the room.

Depending on the manufacturer and the model, the exhaust device is supplied with one or two types of filters. For example, most thin built.in hoods are equipped only with a fat trap, and recirculation island versions of the devices. coal and fat inserts. Consider each type of elements in more detail.

Filters. fat sleepers

This category of filtering devices for kitchen household appliances is divided into 3 groups:

Replaceable products look like a thin “rug” and are used in small.sized built.in hoods of various sizes. Filter material. paper or synthetic fiber based on acrylic, non.woven or synthetic winterizer. The maximum service life of the element is 3 months, provided that the forced air suction operates no more than 2 hours a day.

An important nuance. The principle of operation of replaceable filters is based on the absorption of fats and particles of soot with synthetic tissue. Hence the high degree of cleaning of the air flow absorbed by the fan.

coal, filter, extract, negative

Stainless stainless steel grids and aluminum are also made to the dimensions of household appliances, but are designed for long.term operation. The principle of action is very simple: drops of fat and flying particles are delayed by the smallest cells of several nets placed inside the frame.

Fat frames made of aluminum

We list the pros and cons of each variety of products:

  • A disposable fat filter for hoods effectively cleanses the air, protects the parts of the fan and ducts from sticky plaque. The disadvantage is disposable use, washing and drying the material is useless, only replacement will help. The price of the cleaner depends on the size and ranges from 150 700 (2.5 12.2. e.).
  • Exchange inserts are universal, that is, suitable for all ventilation devices, where the installation of such filter products is provided.
  • Aluminum and stainless mesh are almost eternal, fatty coating can be cleaned or washed with water with the addition of various chemicals (the technology is described below). The new mesh capture is much more expensive than a replaceable version. at least 2 times.
  • Significant minus of mesh filters is a rather rude air purification of harmful vapors. Judging by the reviews of real users, after 1-2 years of operation, a drop of fat covers the fan housing, the internal cavities of the umbrella and the outlet canal.

Lyrical digression. Household kitchen suction is not a panacea. Despite the constant use of hoods, yellow spots of fat fall on the walls and cabinets near the stove. The reason is a large distance from the suction opening to dishes with upcoming food. To effectively remove harmfulness, the umbrella must be lowered, but then it will become inconvenient to cook. It is impossible to catch pairs from a working oven physically.

Coal cartridges

The principle of operation of sorption coal cassettes is fundamentally different from the work of fat filters. Activated coal granules placed inside a plastic cartridge clean the air flow of harmful fumes and the smallest particles. In practice, this means the following:

  • The coal filter for hoods is able to clean the air of the smells of food and exhaust gases;
  • The air mass that has passed by the absorbent can be supplied back to the room;
  • polluted carbon powder or granules cannot be washed with water and thus restore the performance of the element, the worked cassette must be replaced;
  • cartridges are used in all island extracts without air removal (recirculation);
  • In direct.flow exhaust devices, carbon inserts are used as a second stage. fine air purification.

History reference. In the first gas masks made during the USSR time, treatment containers filled with activated coal dust were also used. Purpose. capturing poisonous chemicals. gases and drops of liquid.

coal, filter, extract, negative

Round cassettes are inserted into the fan housing

The filters filled with the absorbent are produced in the form of plastic disposable cassettes and flat “rugs”. Depending on the model of the exhaust installation, rectangular or round cartridges with a hole in the center are used.

The maximum service life of a carbon element is 6 months. With intensive and frequent cooking, the specified period is halved. The cost of products is from 190 (Gefest brand) to 2000 (Rainford). There are more expensive specimens, for example, Faber 112 Fabula for 12.5 thousand.

Rectangular cartridges are placed inside the umbrella working opening

Replacement instructions

As we found out above, disposable fat, combined and coal cassettes are not subject to regeneration by washing or washing. The contaminated element should be replaced when the following signs are detected:

  • The indicator label or the inscription on the fat thin filter applied by the manufacturer (usually becomes red) changed the color;
  • The craving of the fan has significantly increased significantly;
  • The term of operation of the carbon cartridge has ended;
  • The hoods of some brands are equipped with pressure drops that signal the complete clogging of the filter fabric or coal cassette.

Attempts to wash the clogged one.time filter, of course, were undertaken by many users. The result is negative, it is unrealistic to remove the absorpted fat from the fibers. The washed synthetic filler clogs quite quickly again.

First you need to buy an element of air purification for a specific hood. It is better to give preference to original filters of the same brand as your household appliances. In other cases, the manufacturer does not play a special role. If the product of the required size could not be found, take a universal fat.absorbing filter. it is suitable for most exhaust devices.

A universal aluminum grid can be cut to the desired size and put in an old frame

How to remove and install a new filter capturing fat pairs:

  • Disconnect the device from the house network by pulling the fork from the outlet. The precaution is useful. in the process of disassembling some models, you can accidentally hurt the fan start button.
  • Built.in panel put on it all the way.
  • From below, find the latches or plastic locks holding the frame with a filter insert. Unlock them and remove the part.
  • Disconnect the spent filter and install fresh. The frame should first wash the kitchen and dry. We look at the replacement procedure for

Cassettes filled with activated coal are usually located behind the fatter. To get to the carbon filter, the latter must be dismantled. The cartridge itself is attached with clamps or a screw under a cross.shaped screwdriver.

Before servicing a wall.mounted sloping type, throw the front protective screen. How to install a coal filter on a similar household apparatus is shown in a short video:

Purpose and types of filters, differences and prices

There is a wide variety of kitchen hoods. Each hood can be equipped with two types of filters:

Grutal cleaning includes fat filters, which delay the garge and soot, as well as small particles. Their main goal is to protect internal details, the walls of the duct and the hood itself from fat and soot.

Fat filters can be both one.time and reusable use. Disposable are made of acrylic and non.woven. Reusable fat filters are made of steel and aluminum.

There are several types of fat filters on sale:

  • Acrylic filter. simple and reliable in maintenance. You can buy it at a price of 93;
  • Paper filter. it consists of non.woven, disposable. You can purchase it at a price of 255;
  • Aluminum filter. reusable is conveniently washed, consists of oral aluminum. It requires careful care. ;

Fat filter for hoods is recommended to rinse in time or replace it. If this is not done, then the load may intensify on the hood engine and as a result of this its performance will fall. Many fat filters have a replacement indicator, as a result of this you can easily understand when the filter must be replaced.

The fans are exhaust

Powerful lamps are heated greatly, as a result of which the air becomes dry, which adversely affects the development of plants. For the removal of heated dry air, as well as for the flow of fresh air, there are exhaust fans to the room with plants. In terms of meaning, you need to install them in the upper part of the room, because warm air, according to the laws of physics, rises upward.

To determine the approximate necessary power of the fan, we turn to a non.complicated formula: we divide the lighting power in watts by 2. we get an approximate amount of cubic meters of air, which the desired fan must blow in 1 hour. We add 20% to the obtained value (the power spent in the case of a coal filter is connected). In practice, it looks like this:

DIY hollow filter. DIY carbon filter

The heading “Avalled Handles” is gaining momentum and today we have prepared instructions on how to make a coal filter for a gracian with our own hands. But first a little useful information to expand the horizons

Coal properties to eliminate odor

The basis of any coal filter, which, in principle, is clear from the name, is activated carbon. 97% activated carbon consists of carbon and practically does not contain extraneous impurities. The structure of coal consists of crystals of amonomic carbon and graphite, which makes it very porous and ideal for filtering contaminated air. Thanks to the chemorosorption process, the pollutant molecules are absorbed on the surface of activated coal and this process is irreversible.

information about why the filter is needed when growing in a closed room and how to choose the finished one, we wrote in this article. If you still plan to independently assemble a filter for a grows, use our step-by-step instructions below.

Necessary details and tools

What do you need to assemble a coal filter:

  • Air filter from a car (we use a filter for a car gas);
  • Activated carbon;
  • a flange galvanized by a diameter of 100 mm;
  • Washers, nuts, scruffies;
  • drill with a drill of 4 mm;
  • jigsaw, soldering iron, metal scissors.

The choice of air filter for the car is due to the fact that it already has a grid we need, which greatly simplifies the task of creating a coal filter.

coal, filter, extract, negative

The stages of the assembly

The first stage. we get rid of filter paper.

It rests with foam and easily retires with normal heating. However, you should not use the lighter for heating. it will take too much time. For this manipulation, burner is perfect. Put the filter cover on the burner and wait a bit when everything is heated carefully remove the filter (do not forget to put on gloves!) and take out the paper.

Second stage. reduce the diameter of the internal grid.

Since the flange is 100 mm, the internal mesh must be reduced using metal scissors.

Third stage. roll over the outer grid.

In the place where you placed the flange, you need to connect the lid with the flange itself and the outer net. You should get, approximately this design.

On the back of the filter we attacked the nuts into which the screws will be screwed. This is necessary so that you can replace the spent coal.

Finally, we spray the entire structure with activated coal. It is advisable to do this on a vibration stand for a good ramily and close the lid. Do not forget to compact about the foam rubber on the ends of the filter, it is necessary to compensate for the vacant place after compassion of coal.

You get a carbon filter 22 cm long, a diameter of 18 cm, a flange with a diameter of 100 mm protrudes 6 cm, if the flange’s protrusion interferes, the angular grinder to help you.

For those who are not particularly “Mom Engineer”, we offer to familiarize themselves with a large assortment of ready.made coal filters here. Large yields to you!

Coal filters

If we are talking about recirculation models that purify the air in the kitchen and send it to the room again, then a coal filter for extracts is required here. Indeed, in such models, it is important not only to remove soot and fat, but also to clean the air from extraneous smells.

The installation of a coal “capture” is provided behind the fat. This element is based on high.quality adsorbent, activated carbon. He perfectly absorbs all smells.

It should be remembered that in recirculation mode the capacity of the extract falls by 15-20%, and the installation of the absorbing product further reduces it. If the coal adsorbent accumulates pollution, then the air through it will pass worse and worse.

The coal filter for hoods is often not included in the basic configuration, and is purchased additionally. In addition, this is a replaced element that will have to be purchased as it is constantly worn.

Outwardly, such an element may look like a rectangular cassette or circle. The case in the product is plastic, and the coal is held by a special mesh. Activated carbon here in the form of powder or granules.

The larger the total area of ​​absorbent particles, the better the “capture” works. Due to the coal that was creaming in one place, the efficiency of the hood falls.

Filters of this type are considered disposable-their replacement is provided every 3-4 months on average. However, the service life of the element is determined not by “age”, but by the duration of operation. it all depends on how much time the hood works daily.

To maintain the operability of coal adsorbent for a long time, you can leave the hood on for 3-7 minutes after using. During this time, the remains of moisture from coal will evaporate, which means that it will not compact and will not lose the adsorbing ability.

Care and replacement

The fat filter accumulates all pollution on the cells, preventing them from penetrating the internal parts of the device. How best to clear it in practice? The following simple technology must be observed:

How to change the charcoal filter on a Megahome Water Distiller

  • Filters are taken out of the hood. This may require dismantling the decorative panel (if it is in the design). The castle is eliminated for removal and the cassette is advanced.
  • The metal filter is immersed in an aqueous solution of a standard detergent. It can be washed in a dishwasher, setting it vertically.
  • This will allow pollution to be easily washed off. If you wash manually, it is better to use the brushes and constantly rinse the grid under the pressure of hot water. But it is better to refuse such a product like soda, since brown spots can remain on the metal after it. It is also not worth it, to choose a high.temperature regime in a dishwasher. from elevated temperatures, aluminum can oxidize and darken.
  • Washed filters must dry at room temperature.

At the final stage, filters are installed in place. For this, the cassette is placed in a cell, after which the lock is snapped.

The fat filter should be washed once every 2-3 months in a dishwasher-if this technique is not, then once a month you need to wash the net by hand. This is not difficult, especially if you consider that the installation of it is elementary.

| Denial of responsibility | Contacts |RSS