How to put the dryer on the washing machine

Installation, placement of the dryer, a. Installation separately from the washing machine

You can install the devices by the column in three ways, each of them differs in the nuances of attachment:

  • The first option involves the use of anti-tipping kit, which is imposed on the surface of the lower unit, the stability of the construction can only ensure the regular fasteners recommended by the manufacturer.
  • The second relies on rack mounts for the dryer, it is fixed to the wall above the level of the washer, in this case will require taking into account the strength of the supporting wall.
  • The third allows you to build both devices in a niche, which is collected from load-resistant drywall or other materials of high strength.

The choice of the preferred method of mounting the washer and dryer on top of each other or in a column depends on the layout, design, design features of the units, other factors. In any case, it is necessary to install the machines in accordance with certain rules:

  • The recommendation to choose models from one manufacturer, with similar dimensional parameters, remains unchanged.
  • If there is no possibility to choose such a variant, you need to be guided by the dimensions, which should coincide.
  • The dryer is always placed above the washing machine, it is lighter in weight and its vibration is not as intense, which provides the necessary level of safety.
  • The platform for placing the equipment must be level, the lower unit should be placed on the level so that the column is strictly horizontal.
  • It is undesirable to place the units on wooden or other soft floors, they increase vibration, the floors should be hard, to prevent slipping during operation.
  • It is necessary to strictly observe the recommended distance between appliances and adjacent walls, especially when choosing to install in a niche and on the back side, where you should leave at least 2 to 3 cm of free space.

It is important to remember that to fix the appliances without a reliable fixing strip and compliance with other rules is fraught with loss of stability and the fall of the column. Breakage of expensive equipment is not the only consequence of such carelessness, it can create health hazards for family members and especially children

How to install the dryer on the washing machine in the column

The popularity of complete home furnishings with washer and dryer appliances makes it necessary to connect a dryer. Since the area of a standard city apartment is usually small, the most compact variant of placement of devices in a column is preferred.

Features of the placement of machines of different firms

There is no great difference in the installation of machines of different brands. The requirements for the reliability of installation are the same in all cases. For paired installation, it is recommended to use models of the same brand. Such a choice has a number of advantages:

  • Manufacturers offer sets of two units with fasteners, which greatly facilitates installation, ensure the safety and reliability of the construction;
  • Some brands, such as Bosch, Siemens, Asco and Burning produce machines designed to be placed in a column, where the washing machine housing is reinforced specifically for the weight of the dryer;
  • connecting strips of such designs are specially designed to dampen vibrations and maintain stability;
  • the models from Bosch and Siemens can be provided with a retractable shelf, in Asco such a shelf is equipped with a special basket for laundry;
  • Asco drying units are equipped with additional leg mountings, the Slovakian Gorenija has suction cup legs;
  • an undoubted advantage of choosing models of the same brand is a style uniformity and the same dimensions, the latter condition is especially important for maintaining stability;
  • when choosing narrow variants for a small area, you should consider that the minimum depth have devices from Asko, taking into account the mandatory free space at the back, it is 65.6 cm.

In cases where the placement in the column is not allowed, the instructions indicate the minimum distance from the top, which is necessary for the operability of the devices.

Installing two devices in the column correctly

There are three ways to install the devices as a column, each of them differs in the nuances of mounting:

  • The first option involves the use of anti-drop kit, which is superimposed on the surface of the lower unit, the stability of the construction can only provide regular fasteners recommended by the manufacturer.
  • The second rests on a rack mount for the dryer, it is fixed on the wall above the level of the washing machine, in this case you will need to take into account the strength of the supporting wall.
  • The third allows you to build both devices in the niche, which is going to load-resistant plasterboard or other high-strength materials.

The choice of the preferred method of installation of washing machine and dryer on each other or in a column depends on the layout, design, design features of the units, other factors. In any case, it is necessary to install the machines in accordance with certain rules:

  • Unchanged is the recommendation to choose models from one manufacturer, close in dimensional parameters.
  • If there is no possibility to choose such a variant, it is necessary to be guided by the dimensions, which should coincide.
  • The dryer is always placed above the washing unit, it is less in weight, its vibration is not as intense, which provides the necessary level of safety.
  • The platform for placing the equipment should be level, the lower unit should be placed on the level so that the column is strictly horizontal.
  • It is not desirable to locate the equipment on wooden or soft floors, as they intensify vibration.
  • The recommended distances between appliances and adjacent walls must be strictly observed, especially when choosing to install in a recess and on the rear side, where you should leave at least 2 to 3 cm of free space.

It is important to remember that fastening devices without a reliable anchoring strip and observing other rules leads to the loss of stability and the fall of the column. Breakdown of expensive equipment is not the only consequence of such carelessness, it can endanger the health of family members and especially children.

dryer, washing, machine

Connecting the equipment to the utilities

Before starting work, make sure that all communications for both devices are available, it is not only a separate connection to the network. For example, condensing units may require their own outlet under the drain.

Exhaust version will require access to the ventilation shaft or equipment of its own channel with a conclusion in the window.

In general, when installing the units, a connection to the ventilation, sewer, electricity and plumbing must be provided.

Ventilation

To connect to the ventilation duct will have to choose the exhaust model. At first glance, there is nothing complicated here. A duct must be connected to the central ventilation ducting with flexible sleeve and fixed with standard cable ties. However, there are a few nuances to keep in mind:

  • It is desirable to choose a variant with a minimum number of bends, which will facilitate the exit of air and condensation;
  • it is not recommended to allow bends at right or sharp angles, the preferred option is considered a gentle bend, which does not create obstacles to the exit of air flows;
  • In rooms with high temperatures, where condensation is more intense, it is better to use a straight version, which does not accumulate condensate.
dryer, washing, machine

In cases where there is no central ventilation shaft or does not allow you to properly connect the unit, the solution can be to create an independent duct. In the apartment it is most often led out through the window, in a private home is more room to choose a functional option.

Sewer

If you intend to install a condensation dryer unit, you can connect both devices to the sewer. This will eliminate the need for periodic drainage of condensate from the regular tray dryer. There are three options for solving this problem:

  • The outlet of the drain directly into the sewer pipe, this is the most difficult way, it will require the equipment of a special hole, which can not always be done independently.
  • Less costly, the connection to the siphon, most likely you will have to buy a combined siphon with two or more spigots.
  • The easiest way to temporarily fasten the drain pipes to the nearest sink, but because of the vibration of the devices, this option is fraught with flooding of the room in case of hose disruption.

Methods of placement

There are several ways to install the dryer with your own hands. In apartments and private houses can be installed as follows:

How to Install Washing Machine or Washer Dryer ������ ��

The most popular option. the installation of the dryer on the washing machine, which is also commonly called “in the column”. In this case you can save space, which is especially important in small one-room apartments. In order to install the “dryer” over the washing machine in the column, you need to use special fasteners that come with.

Installation is quite simple. on the body of the washing machine are installed anti-drop mounts and special caps. After that the body of the dryer is attached to the caps, the feet are unscrewed and the technique is aligned. There is also a variant of fixing to the wall with special rails, but it is used very rarely. The only important point. the washer must not be narrow (meaning already dryer), otherwise the stability of the upper housing will be questionable.

Please note that installing the washer-dryer in a column without brackets or pallet collars is strictly forbidden. Firstly, these details protect the washer from vibration damage, and secondly, they give stability to the dryer, so that the technique when working does not tip over from the top down.

At your attention visual instruction on installation of the dryer on washing machine:

A simpler installation option. next to the washing machine. In this case, more space is needed, but at the same time the technique will be more stable and there is no possibility of negative impact of the dryer on the washing machine during operation. This option is most often used in large homes and apartments with a large bathroom or a separate room, such as a closet or laundry room. Installation is not difficult, you only need to install the cabinet in the right place and unscrew the legs, so that the technique was exposed strictly to the level.

If you are just making repairs in the apartment and have thought about installing a dryer, you can in advance make a niche for it from plasterboard. A more complex, but convenient option. to make a special cabinet for installation in the column. And the first and second idea is recommended to look at the photo examples:

And the last option of installation. under the countertop or sink. If the dimensions of the technique is small, why not save space and not install the housing in the kitchen unit? This idea is very popular, in addition, if you have chosen a condensing model, the drain will be near, which will simplify the connection of the dryer to the drain.

Installation

How to install the dryer on top of the washing machine:

with screws, as shown in the figure.

How to stack a tumble dryer and a washing machine?

Fasten the plastic caps to the

fastening of the front feet of the dryer to the top cover of the washer-dryer. This is necessary because placing the dryer feet in the plastic caps will ensure that the dryer is positioned correctly on the washer- er.

Break off ear A from the right-hand cap and ear B from the left-hand cap. Then remove the paper from the adhesive on the back of the cap-

The plastic caps on the top surface underneath the plastic caps.

The plastic tabs on the plastic tabs are marked with an arrow on the front or side edge of the cover, and press them firmly against the cover. Then break off the remaining tabs.

simply open the cover from the opening on the back of the washer-dryer using a hammer and screwdriver.

dryer, washing, machine

plastic clips. In doing so, keep the front side raised to a height of 10 mm to 20 mm.

the dryer connection technology

This work can be done by yourself, but only if you have experience in such operations.

Please note! Before you connect the dryer to an existing sewer, make an electrical connection, carefully consider the method of installation.

A professional technician will perform this work quickly and accurately with a certain guarantee. To further the machine is not out of order, the master will advise how best to operate the machine, which operations can lead to a breakdown.

Of course, calling a master guarantees a good job, but will require additional monetary costs. Installation with your own hands is possible if you are familiar with construction and plumbing work. To connect the dryer to the drainage system use a special drain. For the power supply, mount a socket next to the machine (you can use a portable).

Adjusting the feet, Air outlet, Connection to the dryer

Adjust its position so that it stands flat.

Adjust the height of the feet, when screwing or unscrewing them, so that the dryer is level and securely positioned on the floor or the washer. After that, tighten the locking nuts.

The exhaust air from the dryer must be conveyed to the ventilation duct or opening in the wall with the exhaust hose provided.

There are three options for bleeding air from the dryer: at the back, on the right, and on the left. Immediately after delivery one of the openings is opened. The other two are covered. The dryer is delivered as a set with a connector (1), a plastic belt (2) and a vent hose (3).

Prepare the air exhaust system as follows:

and secure it with a plastic clamp.

If you want to connect the drain

If you install a hose to one of the closed holes, remove the plastic cover from the hole.

Models of dryers

There are three types of tumble dryer that people use the most.

Condensing

It is clear from the name of the technique that drying damp laundry involves the condensation of liquid. The drying process begins by heating the air to high temperatures, so the fabric gets rid of moisture. Then the laundry is cooled and moved to the lower part of the structure, where the heating element is located. The procedure is repeated several times. During this time, the liquid formed as a result of condensation moves into a special tank.

dryer, washing, machine

Among the advantages of condensing units are the fact that there is no need for additional work to install a system for air extraction. That is why these models can be installed in any room.

Extraction

Extractor dryers are less frequently used, as they are considered outdated. The main advantage of these models is their simple design and reliability. The principle of operation of extractor products is that excess moisture is drawn into a special ventilation hole. Therefore, before installing a dryer must be equipped with high-quality ducting. However, some people install the technique without it, which leads to increased humidity in the room and the appearance of mold with fungus on the surface of the walls.

People who live in a cottage or private home, should install the construction outside.

With a heat pump

Many manufacturers are trying to improve the dryers so that they better dry things. Therefore, some models are equipped with a special heat pump, thanks to which drying becomes better.

Heat pumps are installed inside the dryers to force dry air into the chamber better. The air then enters the evaporator, where it is cooled by a special cooling element. As a result, moisture is collected from the surface of the fabric, allowing things to dry.

Placing

Of course, there are many options for placing the dryer in your home. It all depends on the models, on the availability of space in the house, on the number of electrical appliances, etc.д. But mostly in apartments and private houses the following methods are used:

The most popular option is to place the clothes dryer directly on the washer, of course, if its model allows to do so. For example, if the lid for throwing clothes on top, it is better not to place the dryer over it, as this would lead to additional inconvenience.

This type of installation is called “in-column” and in small apartments helps to save space. In the complete set of dryers there are special fasteners that allow you to mount such an installation over the washing machine.

Important! In no case you can not just put the dryer on the washer. There are special fasteners for this purpose. The usual installation of the dryer on the washing machine, we will lead to a breakdown, both one and the other. The extra vibration that the devices will emit will cause parts on both machines to break, since they are not designed for vibration from the outside. In addition, as a result of vibration, the dryer can simply fall from the washing machine to the floor and break.

Therefore, there are two ways to secure the dryer in this case:

  • With the help of those elements that come with the dryer;
  • To put the dryer on a shelf made of improvised materials and assembled for it.

Of course, the easiest way to install is to place the units side by side. But, as written above, not always the area of the apartment, especially if it is a one-room apartment, allows you to do it.

Installation “above”

Having decided to place the dryer over the washing machine, in order to ensure that the machine is securely fastened and serves for a long time, pay attention to the following details:

  • The first thing to do is to install the washing machine, over which we will mount the dryer.
  • Install the stand on which the new machine will stand.
  • It is recommended to put a rubber pad between the top of the washer and the stand. This will help to reduce vibrations and therefore the effect of one machine on the other.
  • After installing the rubber pad, secure the drying pad.
  • Place the dryer on the fixed base.
  • Then glue, paint, putty all the grooves, fasteners, etc.д.

After that, you can use both dryer and washer.

Important! Avoid running two machines at the same time.

This is the most complicated variant. It is important to understand that you can not place one machine over the other without the use of fasteners.

Other ways of placement, installation next to, in a niche, in the bathroom, etc.д. does not require the same level of complexity and extra precautions. Nevertheless, each of them has its pros and cons.

Our suggestion

Our masters are able to install the dryer and perform the installation according to all norms and standards in the shortest terms, and in any place (under the countertop, vertically under the washing machine, in a cabinet or a niche: there are many variants). Services are relatively inexpensive: we focus on a wide audience, not on rare and occasional customers. You can verify all this on your own by checking the price list.

If you need to connect the dryer in Saint-Petersburg we will be glad to help you! You can call a master by phone 8 (812) 385-66-80.

| Denial of responsibility | Contacts |RSS