How to remove soot from a fireplace glass

Tools for cleaning the glass of the fireplace: the causes of pollution and ways to eliminate them

The fireplace adds a special entourage to any living room. The popularity of this object does not fade even with the appearance of new, modern heating systems. However, it is not only a beautiful interior solution, but also an additional hassle. Soot often forms on the glass of the fireplace, which negatively affects the appearance and quality of. This is a quite normal phenomenon, which is the result of fuel combustion. How to clean soot from the glass of the fireplace at home, as well as how to prevent the formation of soot.

The main part of cleaning, the most labor-intensive, is to wash soot from the ceiling, walls. Here you need to use a large amount of lukewarm water with a rag. Rags and water will have to be changed constantly as they become soiled. One must take his time and thoroughly clean the wall to make it look clean and soot free afterwards. You can’t do all this with water alone: You need special detergents.

Liquids for washing up with your own hands

Popular remedies are used to clean smoky walls. You can find them at any housewife’s shop. But they must be used according to the rules in order to get a positive result from cleaning.

Soda ash solution

Pour soda ash in hot water. Two tablespoons of the product are enough for 0.5 liters. Wet the rag or brush and sweep over the walls with wetting motions. Do not rub soot into the surface, or it will be difficult to remove it later.

Dish detergent solution

Soap solutions are prepared from warm water with the addition of dishwashing liquid. Dissolve 1 tablespoon of concentrate in 5-7 liters. First wash the ceilings, then the walls and floor with a rag. But in the end it is necessary to dip brushes into the solution and wash them clean.

Solution toilet bowl cleaner

It is necessary to choose alkaline compositions, because soot in the room becomes greasy to the touch and it is difficult to cope with it. If you use “Domestos”, it will not only clean the dirty surfaces, but also disinfect them, eliminate the unpleasant smell.

General cleaning

The main part of cleaning is the most labor-intensive one which consists of washing the soot from the ceiling and walls. Here you will have to use a large amount of warm water with a rag. You’ll need to change the rags and water as they get dirty all the time. It is necessary to do the work slowly and thoroughly to make the wall look clean and without soot after washing. You can’t do without water: You need special detergents.

Washing liquids with your own hands

To clean the sooty walls, you can use folk remedies. They can be found at any housewife. But use them according to the rules in order to get a positive result from cleaning.

A solution of soda ash

Pour calcined soda in hot water. For 0.5 liters is enough 2 tablespoons of detergent. Moisten a rag or brush and sweep over the walls in a sweeping motion. Do not rub soot into surfaces, otherwise it will be difficult to remove later.

How to easily clean a wood burning stove glass window

Dish detergent solution

Soap solutions are prepared from warm water with the addition of dishwashing liquid. In 5-7 liters you need to dissolve 1 tablespoon of the concentrate. First wash the ceilings, then the walls and the floor with a rag. But at the end, dip the brush in the solution and rinse clean.

Toilet cleaner solution

Choose alkaline compositions, as soot in the room becomes greasy to the touch and it is difficult to cope with it. If you use “Domestos”, it will not only clean the dirty surfaces, but also disinfect them and eliminate the unpleasant smell.

How to clean a fireplace glass from soot, soot and smoke

A traditional wood-burning fireplace is a decoration of the living room and the main element of interior design. But at the same time, it is a functional device, which must be taken care of. If you have chosen a fireplace that has a door with glass you have probably encountered this problem. Soot, soot and smoke are the main causes of soot abatement, and soot and smoke build up on the insides of the glass. Such contamination does not affect the operation of the fireplace as a device that gives heat, but disastrously reduces its aesthetic function.

Soot, carbon black or soot are simple amon carbon, which is the result of incomplete combustion of wood in the fire. In fact, it is a black and fairly resistant to many substances film, the appearance of which is inevitable. How and how to remove soot, carbon deposits and soot from the glass surface quickly and effectively without damaging it at the same time?

See also  How to put a fireplace screen saver on your TV

All ways to clean a glass fireplace door from soot

There are several ways or methods for cleaning fireplace glass from natural dirt. Is it possible to single out the most effective and efficient? Yes, of course, but about that later, perhaps something else will work for you.

Mechanical cleaning with a sponge and ashes (folk method)

Although this method is called a folk method, if you think about it a little bit, something does not quite fit here.Please tell me that cast iron fireplace fireboxes with glass doors have always been popular? When and most importantly where did it become popular?? Whatever. The point doesn’t change.

This method of cleaning is advertised by representatives of various companies that sell fireplaces. By doing this they probably show their deep knowledge of the tradition of using fireplaces.

The Easiest Way To Clean Wood Stove Glass

  • Putting on gloves;
  • We soak the sponge in water and squeeze it out;
  • We put ash from the firebox on the sponge;
  • With light circular movements we wipe off the soot with the sponge;
  • Repeat steps 2,3,4 until the surface is completely clean;
  • After rinsing the sponge from the dirt wash the glass with it;
  • Wipe the glass dry with a paper towel.
remove, soot, fireplace, glass

Using ammonia (ammonia solution)

In fact, this method, like the mechanical cleaning with a sponge and ash, can also be considered “traditional”.

Why not? In principle, ammonia has always been popularly used when washing windows or mirrors, along with a pile of old unwanted newspapers.

over, in my opinion, the method using ammonia is actually more popular than the one using ashes. But who likes what. If you like ashes, use them in good health.

  • Rubber gloves;
  • A bucket of warm water;
  • Kitchen sponge;
  • Paper towels or a soft cloth;
  • Ammonia alcohol;
  • Vinegar;
  • Sprayer.
  • Prepare the solution: half a liter of water, 1 teaspoon of ammonia, 1 teaspoon of vinegar. Stir the solution thoroughly and pour into a sprayer;
  • Put on gloves;
  • Spray the resulting solution on the entire surface and wait 2-3 minutes for its reaction with soot and soot (before applying the solution, carefully cover the floor from the liquid);
  • Gently wipe the glass with a paper towel or cloth;
  • Repeat steps 3 and 4 until the surface is completely clean;
  • Rinse the cleaned surface with water;
  • Wipe the glass dry with a paper towel.

Cleaning with a strong flame in the furnace

In this method of cleaning there is nothing to explain. You need dry wood. The strongest possible fire is made, in the flame of which particles of soot and grime just burn up and the glass becomes clean.

There is a theoretical advantage in this whole procedure. At the same time, when creating a strong fire in the furnace, not only cleans the space in it itself, but also the chimney of the fireplace, which reduces the overall fire hazard level of the device.

Use of special and general-purpose household chemicals

This method involves the use of a chemical agent for cleaning the fireplace glass from soot. And it can be a special chemical means for cleaning fireplace glasses as well as any other suitable for these purposes, general-purpose household chemical means.

Chemical cleaning is similar to cleaning with ammonia, except there is no need to make the cleaning solution by yourself.

Mechanical cleaning with a special scraper or knife

If you did not know, just as there are special chemical cleaners for glass fireplaces, there are special scrapers to remove soot, soot, soot.

There is no point in describing the process, because everything is simple: we take a scraper and scrape off the soot from the surface. At the end of the process rinse the glass with water and dry it with a paper towel.

What is the best way to clean glass from soot. pros and cons of all methods

Now the most useful things in this article. As the lucky owner of a traditional wood-burning fireplace with an Invicta cast-iron French firebox, I of course constantly face the problem of dirty glass in the fireplace door. And willy-nilly tried all the above methods to clean the glass from soot and carbon deposits. And made my opinion about their effectiveness based on personal practice.Personal rating of cleaning methods (from the most undesirable to the best):

  • 5th place. Using a strong flame in the furnace. probably did something wrong, but my result. for some reason it does not work. The glass does not get any cleaner;
  • 4th position. Using a special squeegee. of course it works, but It takes a long time for quality cleaning (compared to other options). It is almost impossible to completely clean the glass with a squeegee, you have to use other methods to remove small areas of fouling. Equipment manufacturers warn that mechanical cleaning with scrapers and knives can damage the surface. This in turn is likely to destroy the glass, because of the formation of a point of reduced strength. Conclusion: recommended for use only in exceptional cases;
  • 3 place. Cleaning with ash. definitely works, but in the case of heavy contamination requires some additional effort. Dirt, due to the use of ash, gets more than just on the glass, but at the same time the method is free;
  • 2nd place. Ammonia alcohol with or without vinegar. definitely works, quite effectively and quickly. And if you choose between this option and the previous three. this method is the most preferable;
  • 1 place. Special and household chemicals general purpose deservedly occupy this honorable position. Although not entirely true, the place is deservedly given to household remedies for general purposes, which is not justified by the high price of special funds just for fireplaces,
See also  How to connect a fan with four wires

Cleaning the glass door with ashes

Ash is an ancient and effective tool for cleaning windows. After the hearth has completely cooled, take some white ash, put it in a container and lightly dilute with water.

Mix until a paste-like consistency is obtained. Wipe glass surfaces with ash. You can use a microfiber cloth or an old newspaper. After treatment, wipe the surface with a clean, damp cloth.

Not only will the ash be able to clean the glass, but it will also be useful for washing dishes. An environmentally-friendly and safe alternative to household cleaning chemicals. It cleans trays and baking pans, cast iron, enamelware, metal, and glassware with ease.

The ash is an effective solution for soot and carbon black, as well as grease, even stubborn ones. Read more about how to remove grease and stains from dishes here.

Cleaner

Many specialized cleaning chemicals are available for your fireplace. Pay attention to the formula: it should not contain aggressive ingredients that can damage glass. You can also use an ordinary cleaner for washing dishes or kitchen surfaces, but it will take much longer to scrub the glass.

Ammonia is great for soot. Cleaning of glasses with its help occurs in several stages:

remove, soot, fireplace, glass
  • Wait until the fireplace has cooled down. The door should be cool.
  • Dilute ammonia with water in a container, add vinegar to the solution and pour it into an atomizer.
  • Spray the liquid on the glass and use paper towels to wipe off the smudges and remove the soot. If the dirt is old, you will have to make an effort or spray the solution on the stains and leave it for 5-10 minutes. During this time, the alcohol will soak into the soot, and it will be much easier to remove it.

Ammonia can be used pure, but not diluted with water. But in this case, it will evaporate quickly without removing the dirt. But by soaking a cloth in ammonia, then dipping it into the ashes and wiping the glass, you can be successful in a few minutes.

Soot on the stove glass. Why does it occur and how to deal with it?

Soot. It’s unburned fuel. It appears when the chimney draft is too low or the wood-burning temperature is too low. Universal protection against the formation of soot. clean glass system. It solves all problems. But even if your stove doesn’t have such a system. don’t get upset. Avoiding the following causes of soot will keep the glass clean, allowing you to admire a live fire.

The reason you use newspapers to kindle the stove

And you shouldn’t do that. The composition of the ink used in printing, is such that when burned, it instantly turns into a very “clingy” soot, settling on the glass. So you should only heat the stove with clean paper. But perhaps the best option is a gas burner.

See our video “How to use a smoke-free sauna stove”. This method is also suitable for stoves.

The solution: clean the glass with a special cleaner and do not use newspapers for kindling in the future.

Lack of draft = soot on the oven window and even smoking. There are a few reasons for the draft deficiency: 1) the furnace and the chimney have not yet warmed up. 2) the height of the chimney is not sufficient. 3) there is no fresh air in the room.

The solution to the first problem is simple. make sure that during the ignition of the stove all the combustion air damper is open. If there is still not enough draught, open the door slightly. Also after firing up the stove, do not let it burn for 20-30 minutes.

The second problem can be solved by increasing the chimney to the necessary height. Don’t know up to which one? Call us and we will tell you! Tel. 8 (812) 605-85-05.

In the third case, if the house originally did not have intake and exhaust ventilation, there is only one solution. periodically open a window to let in fresh air.

Reason Stove is rushed into continuous burning mode

We partially touched on this cause in the previous paragraph. If you put the stove-fireplace in the long burning mode before it and the chimney are warmed up, there will be soot on the glass. We also recommend that you do not use this mode very often. Read why in this article: https://nkamin.ru/blog/pechi-dlya-doma/chto-takoe-rezhim-dlitelnogo-goreniya-fakty-domysly-i-zdravyy-smysl

Remedy: Only reduce the combustion air supply 20 to 30 minutes after firing the oven.

Fig 1. Don’t “love” the stove to the point of so much soot on the glass

The more “damp” the wood you use, the more likely soot will form. Use only dry wood with relative humidity of less than 20%. This is about 1.5 to 2 years of drying in a ventilated woodstove.

The reason the log touches the glass

Not an obvious cause, but one which also causes soot on the oven glass. The fact that the temperature in the depth of the firebox is always higher than on the surface of the glass. Because of this, the lumber touching the glass will “cool down” and therefore burn worse. This causes the soot to build up.

Solution: make sure the logs don’t touch the glass and put them as deep into the firebox as possible.

See also  How to tune the automation of the solid fuel boiler

Some tips

A glass fireplace door will always be clean if rubbed with soap

  • Wipe the door after each time you finish using the fireplace. This will help avoid long periods of cleaning the glass when soot builds up.
  • Use ordinary soap to keep the windows clear. After cleaning, spread it on the door and leave it there. At first you will see an ugly soapy mess, but the first time you heat up the fireplace, the material will become clear.
  • To avoid cleaning the glass from heavy soot, use only clean and dry wood for heating.
  • There is an unusual product for cleaning fireplace glass. it is a liquid for automobile chrome parts. When finished, wipe down with any glass cleaner.
  • Use the “clean glass” method when operating the fireplace. It consists of creating a narrow gap on top of the glass. When air passes through the opening, it creates an invisible barrier that protects the door from buildup.

There are several ways to clean your stove. Finding the method that works best for you is important so that you have the right ingredients on hand at all times and your stove door shines bright and clean.

Why smoking glass and how to fight this plague?

Soot is unburned fuel. It appears when there is not enough draft in the chimney or the temperature of burning wood is too low. Universal protection against soot formation. clean glass system. It solves all your problems. But even if your oven doesn’t have this system, don’t be discouraged. Avoiding the following causes of soot will keep the glass clean, allowing you to enjoy a lively fire.

The reason you use newspapers to light your stove

You don’t want to do that. The composition of the ink used in printing is such that when burned, it instantly turns into a very “clingy” soot, deposited on the glass. So you should only use clean paper to heat your fireplace stove. But perhaps the best option is a gas burner.

Watch our video “How to heat the sauna stove without smoke”. This method is also suitable for fireplaces.

Solution: clean the glass with a special cleaner and do not use newspapers for kindling in the future.

Slight draft = soot on the sauna heater window and even smoke formation. There are several reasons for draft deficiency: 1) the furnace and the chimney have not yet warmed up, 2) the height of the chimney is not sufficient, 3) there is no fresh air supply in the room.

The first problem can be solved simply by checking that all the chimney flaps are open when the stove is ignited. If there is still not enough draught, open the door slightly. Also, after kindling for 20-30 minutes do not switch the stove to a long combustion mode.

The second problem can be solved by extending the chimney to the required height. Do not know to which? Call us and we will tell you! Tel.

In the third case, if the house initially did not have intake and exhaust ventilation, there is only one solution. to periodically open the window to let in fresh air.

Cause Hasty conversion of the furnace to continuous combustion mode

remove, soot, fireplace, glass

We partially touched this reason in the previous paragraph. If you put the stove into long burning mode before it and the chimney are warmed up, there will be soot on the glass. We also don’t recommend using this mode very often. Read in this article why:

Solution: reduce the combustion air supply only 20-30 minutes after the stove has been stoked.

Fig 1. Do not “love” the stove to so much soot on the glass

The more “damp” firewood you use, the higher the probability of soot formation. Use only dry wood with a relative humidity of less than 20%. This is about 1.5 to 2 years of drying in a ventilated woodstove.

The reason The log touches the glass

Not an obvious cause, but one which also causes soot on the oven glass. The fact that the temperature in the depth of the firebox is always higher than on the surface of the glass. Because of that, the log touching the glass will “cool down” and therefore it will burn worse. It causes soot and soot deposits.

Solution: keep logs away from the glass and place them as deep in the furnace as possible.

Professional soot remover

You want to clean the glass in your fireplace quickly, without any hassle or risk of damage? Then it is better to use a special professional cleaner “Sootblower”. It is effective in removing soot, tar, soot, and other types of difficult dirt. It is delivered in handy containers with a capacity of 0.25 liters. Usually enough for at least a season. If the fireplace is used rarely, then for two seasons.

  • Shake the bottle thoroughly;
  • Spray the product on the surface. The distance between the spray gun and the glass must be at least 10 centimeters;
  • Wait 5 minutes for light soiling, 15 minutes for heavy soiling;
  • Wipe the surface with a dry cloth, paper towel or standard paper.

This method allows you to effortlessly keep the glass door clean throughout the life of the heater.

| Denial of responsibility | Contacts |RSS