Repair with your own hands
Some people don’t want to seek professional help and try to repair the damaged part themselves.
What you need
First you need to prepare all the tools and materials that will be useful in carrying out the work.
A piece of thin rubber
People who plan to repair an old rubber band must pick up a new patch to attach to the cuff. When choosing a material, the size of the damage to the surface must be taken into account. It is necessary to pick up such a piece of rubberized material so that it completely covers the damaged area.
There can be mold residue inside the drum after using clothes washers for a long time. Getting rid of moldy plaque is difficult. To quickly remove dirt accumulated under the old cuff, use a solvent. This liquid instantly corrodes even very old dirt. It is necessary to use the solvent carefully so as not to damage the washing machine.
Superglue is considered an indispensable tool when working with rubber products. This adhesive will not only help seal the cuff, but also fix it to other surfaces. When replacing the rubber band, superglue is used to attach it to the body of the washing machine.
Specialists recommend using Vinyl Cement superglue, which has high strength and resistance to high humidity.
Soft cloth or absorbent cotton
Cotton or a regular cloth will be needed for the pretreatment of the surface to which the new patch will be attached. It is necessary to treat the area under the rubber with special liquids for decontamination. This is done so that the rubberized material is more securely attached and does not come off for a long time.
Remodeling an old fur coat into a stylish one with their own hands, interesting ideas and instructions
Sequence of operations
To properly attach the patch to a damaged cuff, you must familiarize yourself with the sequence of steps.
Remove the clamps that are used to fasten the
First the person must get rid of the fasteners that hold the cuff. To do this, he will have to unscrew the two small clamps, located on the front wall and near the drum by himself. The first fastener located on the wall is unscrewed. After that, the second clamp can be unscrewed and the damaged part can be carefully removed.
Find the problem area
Taking out the rubberized gasket, it is examined in detail and look for the damaged area. To find the problem area faster, carefully spread out all the folds of the cuff. Sometimes it is not easy to find the tear visually, and you have to look for it by touch. To do this, run your hand over the surface of the rubber to find irregularities that could be a damage.
Thoroughly degrease the place and the patch
The damaged sealing strip must be degreased, so the patch will stick to it better. The degreasing liquid is applied so that the treated area extends beyond the tear by two centimeters. Until the solvent dries completely, the sealant is held in an unfolded form.
How to glue the patch
To attach the patch to the cuff, apply a thin layer of superglue to the damaged area. After that the straightened rubber patch is applied to the treated surface. It is pressed on the surface for 5-10 minutes until it is cured by superglue.
How to properly remove the rubber band from the washing machine with your own hands
High cost becomes a distinctive feature of some repairs, which is a severe blow to the wallet. That’s why many people try not to turn to a wizard, and solve problems on their own as much as possible. With only home conditions, simply fix the problem, if the need for special equipment is eliminated. Every master under force to remove the rubber band from the drum of the washing machine and put a new one.
How to replace the gum on a washing machine with your own hands
Almost every owner of a washing machine sooner or later faces the failure of any part. Some damage is better to entrust the hands of professionals, but most problems you can solve yourself. For example, it is very easy to replace the failed cuff and thus not to overpay for the work of the repairman. Here are tips on how to remove and replace the rubber band on the washing machine with your own hands.
Remove the clamp
Before you start repairing your washing machine, buy the original spare part for your model. The sealing rubber can be bought both in a service store, and on the Internet. Be careful when writing down the serial number of your machine so you don’t make a mistake when buying it. The new cuff should be soft and flexible.
Prepare for the repair and do not forget to disconnect the appliances from the power grid. To carry out the work will require a flat and shaped screwdriver. The first step is that from the rubber cuff of the hatch to remove the retaining metal or plastic clamp. On all machines it is done in much the same way:
find the latch or spring of the clamp, which is a ring dressed along the contour on the rubber seal;
In most cases, such a spring is located at the bottom of the washing machine hatch or on the side in the area of the locking latch.
Remove the facade
To completely remove the collar from the drum it is necessary to disassemble the front of the washing machine. This is done in the following order:
How to Clean Your Washing Machine Naturally (Quick and Cheap)
- Remove the case cover by unscrewing the bolts at the back of the machine;
- pull out the powder collector, under which unscrew the bolts that hold the facade;
- Using a flat screwdriver, open the latches holding the control panel, carefully pull out and put the panel on top of the case to make it out of the way;
- then remove the bottom plastic panel, and then unscrew the bolts along the perimeter of the front part;
- after that it is possible to remove the front part of the housing, providing access to the inside of the collar.
For your information! On some models of washing machines, such as Indesit, Samsung, AEG, it is possible to do without removing the front part of the housing. It will only be necessary to unscrew and remove the top cover.
Disassembly of the damaged part
If you find serious damage to the cuff, you need to buy a replacement cuff and get to work. The first thing to do is to remove the old seal. To remove the cuff from the LG washing machine, it is necessary:
- Disconnect the equipment, disconnect from the house utilities;
- Loosen the metal ring that holds the gasket from the outside. Feel for the spring, gently pick it up with a slotted screwdriver and pull it off;
- tuck the outer edge of the cuff deep into the drum;
- unscrew the two bolts holding the upper housing cover and remove it;
- Remove the powder collector;
- Unscrew the self-tapping screws that hold the control panel in place;
- by undermining the latches, completely disconnect the control panel;
- Carefully lay the panel on top of the washing machine to avoid tearing the supply wires. You can fix it with mounting tape, so that it does not fall down;
- Disconnect the bezel that covers the garbage filter, unscrew the bolt that it hid;
- unscrew the remaining screws that hold the front wall of the LG machine housing, remove it and put it aside;
The door lock device does not need to be removed, it will not interfere with the operation.
After these actions, you can proceed to the direct removal of the cuff. Pull the rubber band and remove it from its mounting location.
When it is necessary to change the part?
The signal that the rubber seal in the LG washing machine is worn, are tracks of water appearing on the front panel from under the boot door as soon as the tank is filled with water and washing begins.
Simultaneously the washing machine signals the problem with the cuff (closing the door) with error code DE (displayed on the screen). If there is no information board on the panel of the washing machine, the problem with the cuff can be understood by blinking temperature, wash and rinse indicators.
Puddle of water in front of the washing machine indicates that the rubber cuff is broken. Operate the washing machine with such damage is not safe. The appliance must be immediately disconnected from the mains, turn off the water supply tap and proceed to fix the problem (yourself or call a specialist).
What are the reasons that water leaks from the bottom of the washing machine LG, how to find a problem and fix it, this article will tell.
Let’s find out the causes of failure
In order to fix the problem with your own hands, the first thing to do is to understand what the cause of the breakdown is. Most often the malfunction is due to wear and tear of the part or mechanical damage.
- The cuff rubber has worn out as a result of long service life.
- Caustic, corrosive chemicals have been used in the washings and could also cause damage to the cuff.
- Entry of foreign hard or sharp objects in the hatch (all kinds of metal items, plastic, badges, keys, etc.).
- Washing many unsuitable items in the machine (for example, hard-soled shoes, heavy outerwear, thick hats).
- Use of low-quality detergent or exceeding the allowable amount of detergent. Detergent of improper quality can often cause the destruction of a rubber element.
Causes of odor and mold
Black mold is a frequent guest of overly frugal housewives who prefer to wash clothes at a low temperature (30 or 40 degrees) and on a fast mode. If you also forget to clean the machine from harmful limescale and use a lot of rinse aid instead of bleaching powders, then mold will appear quite quickly. The reason is simple: at very low temperatures, the device is not disinfected, germs do not die.
If you wash constantly at temperatures below 60 degrees, the washing machine will inevitably get covered with mold.
Mildew can also occur in the absence of chemicals like bleach. Excess laundry rinse can create slimy deposits, which are a great place for fungi to live.Dampness and heat are excellent prerequisites for mold.
Effective washing machine gum (cuff) cleaning
Like all other parts of a washing machine, the sealing rubber needs periodic maintenance. Learn how to properly treat a protective cuff and extend its life here.