How to remove the rubber in the washing machine

With what and how you can clean the rubber band in the washing machine

One day, when you load another batch of dirty laundry into the washing machine, you may smell an unpleasant musty odor, and you may see dark, moldy spots on the O-ring. If the fouling has not spread much, it will be easy to save the machine, but in some cases you may need to change some elements, such as the drain hose, detergent tray, and even the rubber gasket itself. To prevent this from happening, plaque should be cleaned periodically. Today we’ll look at how you can clean the gum of a washing machine from limescale.

Black mold is a frequent guest of overly frugal housewives who prefer to wash things at a low temperature (30 or 40 degrees) and on a fast mode. If you also forget to clean the machine from harmful scale and use a lot of rinse aid instead of bleaching powders, then mold will appear quite quickly. The reason is simple: at very low temperatures the device is not disinfected, germs do not die.

Mildew inevitably sets in if the wash continuously goes below 60 degrees.

remove, rubber, washing, machine

Mildew can also appear because of the lack of chemicals like bleach. Excess laundry rinse can create slimy plaque, which is a great place for fungi to live.Humidity and heat are excellent prerequisites for mold.

Installing a New Cuff

Before replacing the cuff in the washing machine for a new one, you need to inspect and thoroughly clean the seats on the body and the tank.

When installing the cuff the place of its installation on the tank can be lubricated with liquid soap to facilitate the task.

Begin installing the seal from the place of the mark, subsequently holding it to prevent spontaneous removal. After that, check that the collar is properly secured and that there is a uniform gap between the collar and the drum on the entire circumference.

How to save the washing machine cuff

The following recommendations should be observed:

  • After each wash, wipe the rubber surface dry to prevent water from stagnating in the recesses and grooves of the cuff;
  • Leave the door of the washing machine hatch ajar, thus preventing the formation of mold and mildew in the inner cavity of the rubber;
  • Do not use chemicals not recommended or prohibited by the manufacturer when washing;
  • Select the wash mode that provides the best end result at the lowest possible water temperature;
  • When loading the laundry, ensure that the garments are completely loaded into the drum;
  • Set the level, if the washing machine strongly vibrates.

Materials and tools required

Rubber bands can deteriorate for a number of reasons:

  • wear and tear from prolonged use;
  • Mechanical damage from metal objects caught in the drum. Most often it is the keys, paper clips, screws, coins, etc., which were forgotten in the s. п;
  • pinching the laundry when closing the door, which may cause the rubber to burst;
  • Careless removal of washed items, in which metal elements (zippers, buttons) can damage the part;
  • use of corrosive chemicals to whiten the laundry or clean the drum.

Before changing the gum on the washing machine, it is necessary to prepare:

  • The sealing rubber cuff, suitable in specification to the model of the machine to be repaired. On the Internet there are tips for minor damage to reinstall the seal so that the defect is above the water level in the drum. You can not do so. at any time the cuff can be destroyed.
  • electric screwdriver, power screwdrivers to unscrew oxidized self-tapping screws.
  • Open-jaw and ring wrenches. Suitable for removal of counterweights.
  • Liquid soap to reduce friction while installing the seal on some models.
  • Wiping cloth.
See also  How to remove the secondary heat exchanger of a gas boiler

How to Replace Rubber Seal on Washing Machine Samsung Repair

Of course, to change the sealing rubber, you need a certain skill and basic knowledge of the construction of the machine. If you have any difficulties during the work, or you are not confident in the correctness of your actions, it is better to refer to professionals. In addition, the replacement of the gum or other parts in the washing machine should be made at the first signs of failure, otherwise, in the end, it can lead to the final failure of the equipment.

To prevent premature wear and tear on the cuff, you need to know how to properly clean it. Dirt is the source of bacteria which later corrodes the rubber and causes the unit to be repaired.

Installing a new gum

Installing the cuff is one of the most critical phases of the repair, because it is necessary to maintain a tight fit and tightness. The step-by-step algorithm of actions is as follows:

  • Unpack the clamps and set aside the inner and outer clamps separately;
  • use the markings to position the cuff in the correct position. In most models, the triangle corresponds to the top of the seal and the bottom has a hole for the hose;
  • place the rubber on the tank according to the markings and place it in the drum;
  • unscrew the two screws and remove the locking latch;
  • Insert the tip of a screwdriver in the lock, this will help hold the collar in place;
  • Install the inner collar;
  • replace the lock;
  • spread the rubber around the outer circumference of the body;
remove, rubber, washing, machine

Try closing the hatch, and if it comes out without effort, then you have placed the sealing collar correctly. Run the wash test program to check for leaks and tightness. The rubber is installed tightly, if there is no leakage.

Repairing the rubber seal

There are situations when the rubber band on the drum has deteriorated, and to install another one is not possible for various reasons. In this situation you can try to repair the seal.

remove, rubber, washing, machine

When a repair is necessary?

It is advisable to repair the cuff in the following cases:

Even sturdy material wears out over time when constantly exposed to chemicals and heat. If the damage is not too great, the rubber can still be glued.

Pay attention! Even if there is only one hole in the cuff, the patch will only prevent leakage for a short time. A new oil seal should therefore be fitted as early as possible if possible.

If there are minor abrasions on the surface of the oil seal, it can be sealed. As practice shows, such a seal will still last for some time.

The next task is to choose a suitable material for the repair of rubber, because it must be elastic. Under such parameters rubber gloves, which are sold at any drugstore are ideal. You can also find specialized rubber inserts at the sporting goods store that are used when repairing swim laps.

Some requirements are imposed and to the glue, which should be used in the process. it must be resistant to moisture, high temperatures. In various conditions, such glue should remain elastic. Therefore, it is recommended to buy a strong glue designed for shoe repair, because it has rubber in its composition.

See also  Polystyrene gasket for washing machine why

On-line diagnosis of the washing machine

If your machine has stopped washing or rinsing laundry normally, then some kind of malfunction or breakdown has occurred. You can try to find the problem yourself. Start the diagnostics

Select which operation your washer-dryer is not performing:

It doesn’t drain 2. Does not rotate the drum 3. Does not spin 4. Noises, banging, humming when spinning 5. Won’t turn on

Checking whether the drain pump of the washing machine works? Yes No Don’t know

Clogging in the washing machine‘s hoses If the sound corresponds to the normal sound that was always observed when the unit was in working order, the cause is probably a clog.

Drain pump doesn’t work! If the sound is consistent with the normal sound of the drain pump, it is recommended that you first check the filter intended for the drain.

After cleaning the drain pump works, the washing machine drains? Yes No

Drain pump operation The sound of the pump is usually heard immediately, and it is noticeable. If there is no sound. the pump does not work. Find out how to separately turn on the water drain program. It is usually a separate option. After the program has been started the pump should start after 1 to 3 seconds. If everything is done correctly and the pump is functional. you will hear a buzzing sound. If you do not hear a buzzing sound or other sounds when you turn on the program, the pump is probably defective.

The Drain Pump on the Washing Machine Is Working? Yes No

How to Remove Mould on Washing Machine Rubber Gasket seal

Clogging in the hoses of the machine If you have installed a clog in the hoses, they need to be disassembled, cleaned, and then all reassembled.

The water from the washing machine drains well? Yes No

The drain pump is defective, call a technician.

Washing machine does not rotate the drum During the operation of the washing machine may be the following problem. Each model has a different drum operation. It rotates according to a preset algorithm, which is set by the program. This principle applies to the spin and wash. If you are not sure if the drum is not spinning or if it is working, put the laundry in the washing machine. Start the spinning program. If the machine is running, it will first drain the water and then start wringing. In this case, there will be a rotating process. If you cannot see it rotating, check the belt. First turn off the program, then unplug the power cord from the outlet so that power is not supplied to the device. Now you need to remove the back cover. You will need to carefully inspect the drum belt. Determine its wrong or damage is simple enough.

The belt of the washing machine is broken or stretched? Yes No

Belt breakage in the drum drive If the belt has broken, this will be immediately visible. Also, it is often the case that the belt is simply stretched, so the drum, respectively, does not rotate. The machine must not be allowed to run if the belt breaks. It is important to check that it has not wrapped around the engine pulley or torn the engine harness. Also, the heating element and the temperature sensor may be damaged, if the belt still caught the wires. It is imperative that the belt model is original. If you choose an inappropriate or low-quality product, it will affect the performance of other devices. How do you know which belt you have?? The old one will have a marking on it, compare it with the one on the belt you’re offered. You can also find out the belt information from the machine model.

See also  How to insert a needle into a sewing machine

Faulty washing machine motor If the fault was not found, the block with wires must be disconnected from the electric motor. Remove it carefully. Visually inspect the motor. There could be melt marks, cracks or other effects that are a clear indication of damage. We test the tachogenerator winding and the motor. It is important to understand that it is possible to fully explore whether the engine is working correctly and whether there is a malfunction, only on the test bench. If it does not rotate, there may be a problem with the engine. Sometimes the cause is a malfunctioning electronic module. If there was a short circuit in the motor, the module could be damaged, while the motor remains functional. Also, the wires may have been damaged.

Washing machine repair, does not spin laundry After the washing process is complete, the washing machine may not spin enough or not start spinning. First of all, look, probably it is set in another mode, which does not allow switching on the spinning at all. This is the case, for example, with programs connected with washing woolen clothes and thin fabrics. To check this, start the spin separately. If the washing machine does not drain the water, go to check the pump.

Now the washing machine spins the laundry? Yes No

Repair of washing machines, imbalance Modern washing machines before spinning the laundry on the drum. This is necessary for good quality work. Check if the function works. Sometimes it happens that things are rolled up into a ball, which for a certain time can not be unrolled in automatic mode. This stops this stage of operation. You need to unwind this laundry yourself, unroll it and continue the washing machine. In this case, it is important to turn off the machine, and then, when the laundry is placed, turn on a separate program for spinning.

The washing machine is now spinning the laundry? Yes No

Washing machine repair, drum drive repair Now you need to check the drum drive belt. Remove the cover, visually assess the condition of the belt. There should not be any damage. If the tension is weak, the spin may not turn on. If the belt needs to be replaced, it must be replaced with an original belt only. After replacement we try the program again.

The problem is found, the washing machine spins? Yes No

Faulty motor, electronic module, call the master at home.

The washing machine hums, rattles, rattles when wringing, makes a jet airplane noise. If the washing machine makes a noise during operation, making unusual sounds, it is time to pay special attention to it. At the same time visible breakage or lack of functionality may not be observed, but the appearance of strange sounds indicates that it is time to look for faults. It is important to understand that a new machine that has just been brought in should be inspected for shipping bolts. If you forget to remove them, noise and vibration are inevitable. Let’s begin! Turn the drum of the washing machine and listen to extraneous sounds.

Indesit washing machine washing machine cover cuff replacement: how to remove and change the rubber

| Denial of responsibility | Contacts |RSS