How to replace the transport screws of the washing machine

Question-answer

Some users make mistakes out of inexperience and forget to remove the bolts before using the washing machine or neglect to install them during subsequent transportation.

What will happen if you do not take it off?

The washing machine is designed for a long life, but just one mistake in the form of not removed drum fasteners can significantly reduce it, and sometimes make the device completely unrepairable.

During washing, the drum rotates smoothly and gently, and the load is evenly distributed. If the fasteners are not unscrewed, they will prevent the drum from working freely when starting the wash. Vibration and vibrations will spread to the body, the bearings and the motor will be under stress.

Outwardly it will be manifested by strong jumps, especially during spinning, and the presence of extraneous noises. During such operation, the internal parts of the device and the drum itself are damaged, which will require expensive repairs or a complete replacement of the “washing machine” in the future.

How to Reinstall

It must be remembered that the shipping bolts must be put back in case of repeated transportation (moving, sale, etc. д.).

This will require three simple steps:

  • Remove plastic plugs.
  • Insert each bolt into the hole and push it in slightly to keep it from falling out.
  • Screw them clockwise into the holes, thus locking the position of the drum.

Can it be transported without them

Just one improper transport is enough to cause the washing machine to malfunction. Attempting to transport the appliances incorrectly will cause internal and external damage, such as:

  • damage to the power cord;
  • Dents, cracks and chips in the plastic parts of the machine, including the internal compartment for powder and other detergents
  • Damage to the water intake and drain hoses;
  • Tearing the collar and breaking the hatch fasteners;
  • The program switch on the control panel is broken;
  • Faulty electrical wiring;
  • Damage to the drain pump.

If for some reason there is no fastener, which often happens when you reship used appliances, you will have to fix the drum by improvised means.

On the back of the washing machine, you can see special holes designed for transport bolts.

The mechanism of the machine is arranged so that inside there are many parts that are arranged movably, in particular the tank, the drum.

To ensure the smooth operation of the device, everything is secured with shock absorbers springs.

During transportation, the drum is dangling inside the shell of the machine. For this purpose, it is fixed with special bolts. (article on how to find and unscrew them in the washing machine, you can read here).

What is the threat of improper transportation of the washing machine

Before you transport your washing machine without proper preparation, think about what consequences await you in the case of a strong jolting on the way to your destination and the subsequent repair costs in case of breakage.

So, if you could not install the transport bolts on the machine due to their absence and decided to transport the washing machine to another place without much preparation, you can expect the following consequences:

  • Container shock absorbers may be damaged.
  • The program, wiring and contacts are shorted.
  • Plastic parts of the body can be damaged.
  • Hoses, nozzles, pump can break.
  • Door of door to load laundry breaks.
  • The power cord is torn.

Knowing the possible unpleasant consequences and breakdowns that occur if the rules of transportation are not followed, it is necessary to prepare the washing machine for transportation correctly, depending on the type of transport.

Preparing the washing machine for transport

The most important stage in transporting the washing machine is exactly the preparation. There are general recommendations and specific recommendations depending on the presence or absence of transportation bolts. To begin with, what everyone needs to do in preparation for transporting a washing machine:

  • It is desirable, at least one day before transportation, do not use the washing machine and leave it with the door open and the powder drawer. This is necessary so that it could dry out, and during transportation nothing spills out of it in the car. Disconnect the machine from the piping and electricity.
  • Clean and wipe down the washing machine so it doesn’t get dirty. Do not forget to clean the powder drawer, many models of washing machines can remove it, if possible. take it out, rinse and dry, then install it back.
  • If the hoses are removable, remove them and transport them separately. If not, be sure they are as dry as possible so water does not leak out of them. After that, fix the hoses so that they do not dangle and tear during transport.
  • Fasten the wires to the body.
  • Cover all corners of the washing machine with scotch tape (preferably with bubble wrap). This will help avoid the possibility of chipping on the washer itself, on the walls of the old or new apartment when moving appliances, and reduce the risk of injury to the movers.
See also  How to place the dishwasher in a ready-made kitchen

Now we can move on to the most important point of fixing the drum. Depending on whether or not there are shipping bolts, the methods of preparation are different.

With transport bolts

If there are transportation bolts for the washing machine, it is quite easy to fix the drum. It is sufficient to find on the back of the washing machine the holes to install the bolts, and then screw them in there.

Most often, the washing machines holes for transport bolts are closed with special “plugs”, they must first be removed and saved in order to unscrew the bolts in a new place and install the “plugs” back.

replace, transport, screws, washing

Without shipping bolts

There is also a situation that is not a problem, it is quite realistic to transport the washing machine without transport bolts. The main thing is to fix the drum correctly, so it does not twist in different directions during transportation. Here are a few ways to do it.

Put foam in the hole between the drum and the walls of the washing machine. It should be packed tightly enough to prevent the drum from rotating.

This method has an obvious disadvantage foam crumbles, and after installing appliances in a new place, you will have a long time to remove the crumbs of foam. But there is a clear advantage of this method of fixing the drum, and the chance of damaging it in transit is minimal.

Similar to the first one, but instead of the foam plastic, you put the rag. Requires a lot of unnecessary rags, and it is desirable that it was soft enough cloth.

In contrast to the foam method, the rags do not crumble, and they are also good at keeping the drum from spinning.

Suitable for those models of washing machines in which the hole between the drum and the walls of the machine is difficult to fill because of the small free space. It is required to unscrew the back cover of the device, and there already put the foam plastic or rags.

This method has obvious disadvantages you need to make some effort to remove the lid and not break anything inside the device.

In general, all these methods are similar, but each of them has its own nuances.

Where are the shipping bolts

The washing machine differs from other devices in that it has a freely moving internal part of the tank with the drum. This is the heaviest part of the machine. It is suspended on powerful springs to its body from the inside, and from the bottom rests on shock absorbers.

When the machine is in one place and is not exposed to external factors, there is no contact of its rotating part with other elements of construction. However, during the transportation of household appliances is allowed to tilt them in different planes. At the same time, the unfastened rotating mechanism of the machine can:

To avoid breakage due to falling or shaking, special fastening elements for the washing machine transportation transportation bolts are used. This is the name given to the fasteners designed to hold the rotating part of the machine stationary and keep the drum properly balanced. In spin mode, this element picks up high speed. Its misalignment with the axis of rotation leads to strong machine vibrations, increased loads on shock absorbers and bearings and reduces their service life.

See also  How to add conditioner to the washing machine

The location of the guards depends on how the laundry is loaded into the machine.

All front-loading models and almost all vertical-loading models have them in the same place on the back of the cabinet. Some vertical loading machines are a rare exception: they are fitted with additional safety bolts under the top cover of the machine.

Can the washing machine be transported lying in the machine without transport bolts

Transport regulations ? the new washing machines do not accidentally require the use of packages for these purposes, reinforced with cushioning pads, guaranteeing the complete safety of the contents. The mechanism of the device is sensitive to accidental shocks, vibration, incorrect orientation in space, contact with moisture, etc.п., Therefore, the transportation of the appliance, already used, should also be made competently, preferably in the original box. People wonder if it is possible to transport the washing machine lying in the machine.

The main purpose of fixing parts is to secure the tank. All manufacturers use them as a precautionary measure to protect the appliance from mechanical damage, so that the internal parts do not come into contact with the walls of the appliance. If the mounts are installed, the body and the drum compartment are not subject to holistic destruction.

Location of fixing elements

To determine the location of the fasteners, you need to know that there are several ways to load clothes into the washing machine: frontal and vertical. Given this factor, the transport bolts are mounted in two ways:

  • When the drum is located vertically, the latches are placed at the top of the case and on the back wall;
  • In the horizontal position, the bolts are attached only to the surface of the rear wall of the equipment.

If there are difficulties in finding the location of the fixing elements, then you should use the manual, which has all the necessary information.

fixtures with four fasteners are the most common, but there are individual models that use two or three fasteners. In most modern appliances, the fixators are placed on the back wall on the sides of the body.

How the transport bolts of the washing machine look like

Special fasteners during transport firmly fix the drum located inside the enclosure to prevent it from coming into contact with the walls of the unit and internal elements. Their design is simple to perform, made of three main components: a screw, a rubber ring, a plastic insert. All modern models are equipped with handy accessories to protect the device from internal damage.

Useful at! Fixing parts are equipped with washing machines with vertical and front loading. No great effort is required to remove them. The operating instructions describe the process for removing these fasteners.

How to remove the shipping brackets?

Before removing the fixtures, the appliance must stand for some time to take a room temperature, after which the device is connected to the water and sewer. When carrying out all the processes, the bolts should be removed, otherwise the unit may break during the first wash. To remove the fasteners, a wrench with the appropriate dimensions is needed. The devices of certain manufacturers are supplied with the required tools. In case of absence of the necessary wrench, it is possible to use pliers.

Disassembly is performed in the following order:

  • unscrewing the screws is not fully, only loosen the parts with a wrench (about 35-40 mm);
  • the screw element is pushed inside the device (to a depth of 20 mm);
  • without removing the screws, remove the rubber rings with plastic inserts.

After removing the transport locks, holes are left on the surface, which must be sealed with the plugs supplied with the machine. Simply press the button as far as it will go until a “click” is heard.

Important! Do not throw away the fasteners after dismantling, they may be needed for re-transportation after an indefinite period of time if you have to plan the move again. It is better to pack and store the parts so that you don’t have any problems with unexpected transportation of the appliance.

What happens if the shipping bolts are not removed?

Remove the fixing parts immediately after connecting the unit to the water and sewage sources. Dismantle it before turning on the equipment, otherwise shock absorbers and bearings will fail first, and then the rest of the working parts.

See also  The washing machine shows ie what does it mean?

The fixed drum does not soften when beating, causes heavy loads on the moving elements. In such a process, the bearings and motor can be damaged. Vibrations affect all the working parts of the washing machine, due to which a breakdown occurs. In this case, the warranty for repair is not valid, and replacement of defective parts will be quite expensive.

Signs that the shipping bolts have not been removed:

  • When washing in rinse and spin modes, the appliance vibrates strongly, “bouncing” on the surface of the room;
  • During operation, the unit makes increased noise and extraneous unpleasant sounds.

To avoid such a situation, before starting the washing, it is necessary to check the back of the machine for the presence of transportation bolts.

Important! If during the washing process it was found that the locks were not removed, they must be removed immediately and contact a service center. A qualified technician will evaluate the state of the equipment parts and give the recommendations for further operation.

How to install the shipping bolts?

If you plan to transport the washing machine, it is important to fix the drum correctly, so that during transportation it is not damaged and does not cause damage to the internal parts. In this case, you need the bolts that originally came with the device. If the fasteners are not saved, they can be purchased in stores of household appliances.

Basic rules for installing the fasteners:

How to remove Shipping Bolts from Front Load Washing Machine||Installation of Samsung Washing Machin

  • Take out carefully the plugs to release the holes under the fasteners, they are easily removed with a screwdriver, any thin object, gently picking up the edge;
  • insert the bolts into the armholes, tightly screwed in with a wrench to secure the drum.

The machine must be properly packed so as not to cause any external mechanical damage. To do this, it is best to choose a frame of rigid material that will reliably protect the body of the implement from deformation and shock.

Purpose

After buying a new washing machine, it is almost always necessary to transport it. even if the store, for the sale of large appliances, is located next door. But how long, in what conditions and what modes of transport the car traveled to the store. the buyer does not know. The packaging for transporting the machine varies from manufacturer to manufacturer. It can be a cardboard box, styrofoam box, wooden cover.

But all manufacturers necessarily attach transportation bolts to the most important part of the washing machine, its drum.

The drum is a movable part, suspended on special springs. During the operation of the machine, we observe its rotation and fine vibration, at the expense of which the washing process takes place. When transporting the drum must be fixed in place. Otherwise it could damage the drum itself or damage the tank and other nearby parts.

Transport bolts can look different, and their design is determined by the manufacturer. As a rule, it is a metal bolt itself with a hexagonal head, as well as various rubber or plastic inserts. The inserts are put on the bolt and ensure the safety of the surfaces around the fasteners. In addition, metal washers, plastic or rubber gaskets can be used.

Bolt sizes for transportation vary from 6 to 18 cm, depending on the brand of the washing machine, its design features and decisions of the manufacturer.

Transport bolts on the washing machine: where they are, how to unscrew and whether you can transport without them

Delivery of household equipment from the manufacturing plant to retail chains and from stores directly to customers is carried out according to certain rules of transportation. To avoid loss of appearance and breakage of the product mechanisms, the appliances are transported in special factory packing.

To protect the goods from damage, usually use corrugated cardboard and foam frames, but to move some appliances manufacturers have provided specific protective devices. In a washing machine, the transporting bolts are for this purpose.

| Denial of responsibility | Contacts |RSS