How to run the machine with citric acid

How to clean the washing machine from scale with citric acid?

In order for the washing machine to serve without fail, it should be cared for and clean the equipment. In practice, there are various options for maintenance, but many housewives choose folk methods. If you are looking for information on how to clean the washing machine from scale with citric acid, this article will help to find an answer to the question of interest.

How to Clean a Washing Machine with Citric Acid

Freelance author specializing in writing about education, pedagogy, and useful and interesting tips and tricks.

Cleaning machines with citric acid ��

Few homes run clean tap water without impurities, so over time when using the washing machine will be formed scum.

Under the influence of high temperatures during washing, the heaters heating the water sediment small cloth fibers, particles of powder that have not dissolved. all this also affects the growth of a kind of “crust. We offer you the algorithm for cleaning a washing machine with citric acid at home.

What else you can use?

Vinegar

One of the most effective methods. In addition to cleaning, it also removes unpleasant odors and fights mold, settling in the interior of household appliances. The availability of vinegar is also a plus, because it can be purchased at any grocery store. To clean with the help of this agent, the following rules should be observed:

  • When the water inside the machine mixes with the vinegar, interrupt the wash;
  • After one hour, resume the washing cycle;
  • After cleaning, rinse again to remove the vinegar smell and plaque particles;
  • Wipe the drum with a rubber cloth and leave the machine door half-open to evaporate any remaining moisture.

This is a very effective method, but it should not be abused. Can be applied once every 6-7 months. The disadvantage of vinegar is a very pungent smell, so after cleaning, you will have to ventilate the room. If you choose too high a percentage of vinegar, the liquid can tear the sealing rubber when you clean.

Such means as citric acid and vinegar are the most effective, and safe for the human body. Of course, specialized products act directly to combat this problem, but beyond that, can harm their vapors or residue on clothing (because very often they are not so easily washed from the tank).

Household chemicals

Some of the best known household chemicals include Calgon and Alfagon. The principle is very simple: just add it to the machine every time you wash it.

But this method is more of a preventive, since these means only soften the water, but do not get rid of limescale in the machine.

“Calgon” is known for its advertising to everyone, even a small child. But is it such a reliable protection for your machine?? It turns out that with prolonged use “Calgon” forms a harder layer of stone on the tube heater, similar to cement, which is much harder to get rid of than the scale. The result is even more damage to the heater. Of course, this product really softens the water, but is there any good with such consequences? It’s up to you.

Descaling agent

This chemical works on the principle of citric acid. The only difference is that it costs a little more and has its own drawbacks, but we will tell you about them a little later.

See also  Error 7 in the Gorenier washing machine

In the composition of this substance is an acid that eats away layers of salt deposits. Add the substance to the dry powder compartment and turn on the wash without laundry. The product is effective almost immediately. But back to the pitfalls:

  • First, the acid can corrode machine parts made of rubber if you run the wash for 60-70 minutes;
  • Secondly, it is not good for breathing;
  • Third, it can settle on fabric fibers.

“Anti-limescale” effectively gets rid of limescale, but if the liquid corrodes the parts of the machine, it will need additional repair. Therefore, you need to be very careful with such a substance.

Cleaning procedure

In order to understand how to descale a machine, you need to imagine the complex structure of the washing machine in the form of a kettle with a drum. This means you can clean the washing machine the same way you would clean a kettle. Only in this case, a different proportion of ingredients is used.

Citric acid must be loaded into the washing machine without laundry or detergents. Otherwise, all cleaning will be reduced to the fact that your laundry will acquire a lemon aroma. Washing things with this acid is possible, and this will have a positive effect on the condition of the drum and the heating element. However, this should only be done in a situation where the water used is highly mineralized. In this way it is possible to produce sediment immediately in the process of washing. Good rinsing after washing contributes to the removal of salts, rather than their accumulation inside the machine.

However, if there is a need to remove the already accumulated sediment, clean the washing machine at idle speed, that is, without laundry. In this case, nothing will prevent the acid from interacting with the salts and accumulated dirt.

To clean the laundry, follow the steps in the following algorithm:

  • Instead of laundry detergent, you need to pour the acid in the amount described above;
  • then you need to run the machine in washing mode with hot water (the temperature must be at least 90 degrees);
  • the run time should last at least 40 minutes;
  • Drain the acid and rinse the machine with clean water.

These recommendations are designed for average conditions. However, the dispenser does not tolerate idle washes, so put a few rags in the container. A little acid will do them no harm.

The effectiveness of the actions can be evaluated by the turbidity of the water, as well as by the condition of the heating element and the drum.

If you are not satisfied with the effect, then repeat the procedure after the machine is completely clean from the previous acid treatment. Also those surfaces that are not part of the internal mechanisms should be washed. This is especially true for plastic and rubber parts, which suffer the most from the effects of aggressive environments.

Causes of scale formation

Hard water contains large amounts of calcium and magnesium salts, which form a hard sludge when heated. Scale in the form of a crust is firmly “welded” to the metal surfaces. The causes of scale formation are not due solely to the high water hardness. The condition of the parts of the washing machine is affected by the chemical components that are part of the washing powders. Poor-quality laundry detergents can accelerate the formation of deposits, so choose only proven powders.

Formation of limescale contributes to the constant operation of the machine in an intensive washing mode at temperatures above 60 ℃. Heating the water to 4060 ℃ is enough to effectively remove dirt from the laundry. In this temperature regime there is no formation of insoluble sediments, and the parts of the washing machine are safe.

Pros of citric acid as a cleaning agent for automatic washing machine

Citric acid has advantages over other cleaning agents:

  • Given the fact that citric acid is a food-approved product, it poses no danger to humans;
  • the process of cleaning with citric acid is simple and does not require any special skills;
  • Acid costs literally pennies, so that one of the most accessible means;
  • citric acid powder can be found in any grocery store;
  • this product is gentle on the parts of the washing machine, unlike ready-made aggressive chemical compositions.
See also  How to clean the compartment in a washing machine

Citric acid. a cheap and affordable remedy

How to clean a washing machine with citric acid?

To keep your washing machine in good working order, you need to care for it with special products that soften the water and clean the parts from limescale and scale. Manufacturers offer many specialized products for both water softening and descaling. Cost such means are expensive, but there are their cheap analogues. folk remedies, available for purchase in regular stores. One such analogue is the most common citric acid. It reacts with salts and helps get rid of them.

General Info

Before starting the procedure of cleaning the most important parts of the washing machine, it is necessary to study in detail all the information about this work. It helps to solve the problem more quickly and avoid any mistakes.

Reasons for performing the procedure

Most people believe that frequent use of the washer will eliminate the need for cleaning. In most cases, this misconception leads to serious breakdowns that require large financial expenses to repair or buy new appliances.

The need for a thorough treatment of the device is due to the following factors:

  • Scale formation on the electric tube heater (TEN). It’s the part of your washing machine most often exposed to low-quality water. It contains magnesium and calcium salts, which gradually deposit on the heater and form hard deposits. Because of it, the heating element is slower to heat the water, resulting in higher monetary costs for energy bills. In addition, limescale can lead to a breakdown of the electric heater and the need for costly repairs.
  • Lint settling on the drum and other design elements. Some washed items are made of low quality materials. Because of this, their lint gets into the water and then “attacks” various parts. As a result of their impact, the drain holes in the drum and hoses are clogged, which leads to a malfunction of the entire device.

Advantages and disadvantages of the product

With the help of acid, you can wash different parts of the washing machine. This all-purpose descaler is not only suitable for removing lint from the heating element, but also for treating the drum. It has many advantages, the most important of which are the following:

  • Availability. Acid (citric acid) can be purchased at any grocery store, supermarket or market. It makes it possible to treat important parts of the washing machine when needed.
  • Cheap. It is possible to buy the necessary amount of limonka for a small amount of money. This allows the product to be used even by people who do not have great financial resources.
  • Fast dissolving in water. In case of contact with a warm liquid, the lemon juice dissolves instantly. It avoids getting it on the clothes to be washed.
  • Safety. If the proportions are chosen correctly, the substance has no adverse effect on the parts of the washing machine, and also does not react with the materials of which they are made. Determine how much lemon juice is needed to clean the washing machine with the help of recommendations of people who have repeatedly carried out such a procedure.
  • Ease of use. No special knowledge or skills are needed to wash your washing machine with citric acid. It is enough to pour the necessary amount of product and turn on some washing mode.
  • Quick procedure. It is possible to clean the washing machine qualitatively in one procedure. This saves time and money that would have been spent going to a repairman.
  • Versatility. Lemon juice not only dissolves calcium and magnesium salts, but also effectively fights a variety of impurities, as well as unpleasant odors.

Such a large number of advantages are necessarily compensated by disadvantages. They are much less, but they should not be neglected.

See also  How to make a wax for hair removal

The disadvantages include the following:

  • The need to add a certain amount of citric acid. If you put too much of the product, it will gradually destroy the hoses and rubber sleeves, which will lead to leaks.
  • Strict frequency of the procedure. If you clean the washing machine too often, the lemon will damage some important parts of the device.
  • Difficult to remove old dirt. Not too aggressive substance may not cope with them, so you will need to use special chemicals.

Causes of mold and odor

As you know, it is much easier to avoid potential problems than to clean up afterwards.

What are the causes of the moldy machine and the repulsive smell?

Wet drum

Often in a hurry, just taking out the washed laundry, the mistress slams the door, and the drum of the machine remains wet. And in a humid environment fungi and other microorganisms multiply. This results in a characteristic musty odor. You need to wait a few hours for everything to dry well.

But it is not recommended to leave the machine open longer, because otherwise the door will begin to sag.

Dirty door gasket

  • After completing the wash cycle, careful users wipe the wet hatch with a rag so it doesn’t build up plaque.
  • The same should be done with the rubber gasket. It is multi-layered, because it protects the drum.
  • And different debris and small objects left in s of clothes, as well as hair, dust and liquids can get stuck in each of the layers.
  • All of these factors form a favorable rotting environment, hence the smell.

Dirty clothes in the drum

Sometimes worn-out clothes are stored in the machine long before they are washed.

  • If you regularly follow this habit and at the same time close the door, a strong stench will become a constant companion of your household appliance.
  • It is much more convenient to use a special basket for storing dirty clothes, selecting it according to the style of the interior and the right size.

Crooked installation

If the machine stands unevenly on the floor, it can not be completely free of water after washing. Where there is the least inclination, the liquid will stagnate, the presence of which you will know by the repulsive smell of damp and rotten.

Clogged drain hose

Cleaning this part is a laborious and practically useless process. If the hose is faulty, it is much better to replace it with a new one.

The quality and quantity of laundry detergent

Low-quality detergents do not fully dissolve with water, so they precipitate on the walls of the machine.

  • The same thing happens with excessive use of even very expensive products.
  • They don’t wash out completely and become sludge too.
  • And subsequently the cause of not the best flavor.

Dirty powder tray

The case when the cause is literally on the surface. If the tray itself is soiled, the channel through which the detergents flow into the deepest part of the machine will not be clean either.

A clogged filter

This is the most common cause of odor. To keep the filter as clean as possible for as long as possible, keep foreign objects and loose clasps out of the drum.

Once stuck in the filter, they accumulate smaller particles around them, not allowing the fluid to pass freely.

If the heating element is covered with limescale, the stench will be especially strong. After all, other dirt also adheres to the plaque. It emits a particularly strong odor when washed in medium temperature water.

Troubles in the sewer system

In this case, the bad smell will be not only in the drum, but also in the drain of the sink and bathtub.

| Denial of responsibility | Contacts |RSS