Learning how to remove the transport bolts from the washing machine
When buying a “washing machine” it is important to know the rules of its installation and connection. Particular attention should be paid to the transportation bolts, let’s understand where they are on the washing machine, how they look, how and when they need to be removed and put back.
The text is valid for automatic washing machines of foreign and domestic production: AEG, Ardo, Beko, Bosch Maxx, DAEWOO, DEXP, Candy Aqua, Aquamatic; Gorenje, Haier, Hansa, HiSense, Hotpoint Ariston, Electrolux, Indesit, Leran, LG Direct Drive, 6Motion, 6Motion; Miele, Samsung, Siemens, Vestel, Whirlpool, Zanussi, Atlant, Vyatka and others.
Purpose of anti-vibration stands
Installing the anti-vibration stand is the surest way to save yourself from the loud noise and damage to the flooring. It is a small detail that can eliminate the malfunction of household appliances. The washing machine, bought recently, is equipped with new accessories and additional protection.
Anti-vibration washer racks. products that extend the life of your washing machine.
Bearing, damper, shock absorbers. parts that prevent severe vibration in modern appliances. The machine, which has been in active use for a long time, begins to lose its original characteristics. Parts wear and tear, vibration occurs and a special stand for your washing machine is a must.
These useful devices prevent the appearance of noise, premature wear of washing machines.
Main functions of the anti-vibration stand.
- Limits noise and vibration level.
- Gives you stability.
- Prevents scratches on the floor.
- Eliminates the problem of uneven flooring.
It is an inexpensive, affordable way to reduce vibration and rumble in your laundry.
Why do it?
the logical question arises, why then level the machine at all? In spite of various factors, it must be done. In fact, an improperly installed machine will vibrate excessively, and sometimes it will jump. Excessive vibration of the drum and the entire washing machine leads to faster wear and tear of parts, the technique breaks down.
Most often, vibration causes the following troubles:
- the plastic tank cracks;
- Cracks the tile in the room on the wall from the blows of the vibrating machine;
- the machine “moves out” of its place;
- Bearings wear out.
In order to install the machine correctly, and it does not bounce, some users, based on their experience, recommend using rubber cups under the feet. They are attached to the floor and reduce the vibration of the machine.
So, you can set the washing machine on the level by yourself. If you have no desire to do such work, or there are no tools for this, then call the master, so she did not jump later But just do not leave the machine in an unstable position!
The easiest place to install the washing machine is near the water and electricity connections. In this case there are no problems with lengthening the hoses and electric cables.
The aesthetic component and convenience of operation should not be neglected, either. For small apartments, the question arises whether the appliances will fit in the intended place.
Your choice of location: in the bathroom or in the kitchen
Most washing machines find a home in the bathroom. This is the most logical choice of place, since there are usually water pipes and sewage. In addition, the appliances will be hidden from view.
If there is not enough space in the bathroom, you can think about connecting it in the kitchen or even in the hallway.
- The floor must be able to withstand vibration.
- It may be necessary to lay communications at a remote distance.
- When measuring distances it is necessary to consider possible unevenness of the walls. Just in case, the nominal dimensions of the machine should be at least a centimeter less than the available space.
Machine washing, like any other, primarily requires water. The plumbing requirements are as follows: the pressure in the pipes must be sufficient and the water clean. If these conditions are not met, a pressure booster pump can be installed and the water filtered.
It is imperative that a separate tap be built into the piping, shutting off the water supply to the machine. This significantly reduces the likelihood of leakage.
The washing machine has a lot of power. Therefore, available in older apartments electrical cables and sockets for it, as a rule, are not suitable.
The quality of the floor
Serious requirements are placed on the floor structure. First of all, it must be solid and strictly horizontal, without obvious irregularities. In addition, the coating will have to withstand vibration from a rotating drum.
If the floor in the apartment does not meet these conditions, it must be reinforced where the equipment is to be installed.
The plus temperature of the air
In apartment conditions, the washing machine is always kept warm. However, in a suburban private house or technical room, it is possible that the heating is cut off for a long time. This is completely unacceptable! There is always water inside the washing machine after the wash. In the cold, it will inevitably freeze and rupture the hoses or even the pump.
How to adjust the feet on the washing machine correctly
If you installed a washing machine, and it does not stand in one place because of vibration, as if trying to “escape”, and even bounces when spinning. then you probably installed it wrong. And even if the floor of the kitchen or bath seems “to the eye” flat, it does not mean that they do not have relative to the ground any deviations.
The need for proper installation of the washing machine
Therefore, the question of why we need the right installation of the machine, we can answer as follows.
Suppose you have purchased a good quality, new bed, and there is something wrong with it, missing something. Then you realize that you are missing a mattress. When a special mattress is purchased and installed in place, of course, to sleep on it becomes much more pleasant and softer. The same principle is used for the washing machine.
In order to level the washing machine it is necessary to use the method described in the instruction manual, that is. twist or unscrew the feet of the washing machine.
And to do everything correctly and qualitatively, on the cover of the machine set the construction level.
Anti-Vibration Pads Washing Machine Samsung Electrolux
It will show how we need to act and we can proceed directly to the adjustment.
In some machines, such as washing machines LG, in the instruction manual is a clear indication that it must be set perfectly flat. If you neglect these instructions, then as soon as you start using this household appliance, you can immediately begin to prepare yourself for repairs, and unplanned ones at that.
Parts that can be broken if the machine is not installed correctly
What breaks first?? Mainly the parts which are mechanically stressed.
They are needed to dampen the vibration of the feet of the machine during spin mode.
If the automatic machine is installed unevenly, then the wear of the shock absorbers is uneven, and with prolonged use, it can even break down.
This can result in a strong runout, which will hasten the collapse of the rest of the machine.
Bearings. Even a slight misalignment puts unnecessary stress on a bearing group. If this is unnoticeable with a small load on the washing machine, it is more noticeable when the drum is spinning at full speed.
Therefore, if you find it difficult to adjust the feet of your washing machine yourself, or if you do not have the necessary tools, please contact an expert.
There is another reason to adjust your washing machine. stagnant water.
A skewed machine will form a place of stagnant water that the pump can’t completely remove. In this place there will be a cluster of germs that can get on the clean things.
How to regulate the washing machine with your own hands
- Liquid nails.
First you will need to check the surface on which you are going to install your washing machine. If the floor is uneven, it doesn’t matter whether it is tiled or concrete, the machine will still fail. This means that even with a slight vibration, the machine will still bounce and move slowly from its original location. If this applies to your case, then you need to level the floor, and then you do not even have to adjust the washing machine. If you have a flat floor surface, then you should look at how the feet of the washing machine. This is done by gently wiggling the machine back and forth. You can also tilt it slightly to the sides. This is to see which feet need to be raised for the adjustment. Now let’s move on to the process of adjusting the washing machine itself. To do this, those feet that need to be lifted should be unscrewed (or rather the washer on them), and then rotate the foot clockwise or counterclockwise. This is the adjustment process itself. To check the accuracy of the installation, use a spirit level. Ideally the level bubble should be in the center. The best way to measure is to put the level on the machine itself and make the adjustment. To adjust and level certain types of machines, you can use an additional device. Take a plywood sheet and cut out the base for the machine. Next, you need to attach it to the floor with dowels or liquid nails.
- The following operation can be called a folk method: wipe the floors with very sweet water and immediately put your newly purchased appliance on them. It should stick to the surface. The method is, quite frankly, questionable, but those who have done so, assure me that all went perfectly.
Breakage of internal elements such as shock absorbers, dampers and counterweights, as a rule, causes shaking and shifting of the washing machine when wringing.
How to adjust the washing machine?
To regulate and align the machine, its creators have provided for the presence of special unscrewing feet. In order to increase or decrease the height of this or that leg, you can screw it into the body, or vice versa, unscrew it. Through these actions, you will be able to level the washing machine.
To make sure it stands firmly, you can rock it slightly. If it fails to any side, then you need to adjust the leg on that side. That is, to increase its height. If it fails on both sides, then you need to unscrew the two legs alternately. Do this until the washing machine is in a normal, stable position.
Do not turn all knobs to maximum at once. This approach will prevent you from installing the machine correctly.
Important nuances of proper adjustment
In addition to the simple adjustment of the feet for the washing machine by eye, a special adjustment is highly desirable. In addition to stability, the machine needs to be level to work well. Therefore, you should also take into account whether there is a tilt of the machine to one side or the other.
In order to check this we recommend using a construction level. This tool is great for measuring deviations. Place it on top of the machine body. First parallel to the front and back of the machine. Then parallel to the side walls. And pay attention to the position of the bubble in the water cell. It should be within the lines at the center of the glass cell. That means your washing machine is level. If the bubble deflects to the left or right, you need to adjust the feet.
Adjusting the feet of your washing machine with a level will ensure that your appliances are correctly positioned. And this, in turn, guarantees that during operation the internal parts of the machine will not unnecessarily touch each other and the housing. And accordingly, will keep their performance longer.
If you follow the rules of installation of the washing machine, then its use will be long and pleasant.
What else is important when installing the appliance?
To make it easier for you to connect the machine yourself, we decided to add
Anti-slip And Noise-reducing Washing Machine Feet
- The Indesit washing machine makes a rattling noise when it spins
- Why does the washing machine make noise??
- Bosch washing machine makes noise when wringing
- Washing machine makes noise when spinning. what to do?
- Choosing a stand for washing machine feet
- Ariston washing machine makes noise when wringing
Description and purpose
The causes of strong vibration of the washing machine may be.
Anti-vibration devices are made of resilient material and are often round or square in shape. The diameter of the feet is 5-6 millimeters. In the center of the stand there is a recess for the foot. The color of accessories for the washing machine is usually white or light gray, sometimes on sale you can find black and transparent supports.
Feet for the washing machine are designed to reduce its vibration during washing. After a certain period of time, the parts of the appliance wear out, which causes the unit to shake and vibrate. To all other things, consumers can not always set the machine on the floor with perfect flatness. Therefore, feet for washing fixtures will eventually be required by every owner. These inexpensive devices will solve the problem with vibration and change the situation for the better. Among other things, the functions of the stands include reducing noise, slipping on a smooth surface.
The coating under the washing machine with legs remains intact for a long time, there are no cracks and scratches on it.
Nowadays, you can buy a large number of types of stands for the “washing machine“. Accessories have different height, color, shape and other features. The most common supports for this type of household appliances can be called the following.
When choosing anti-vibration stands, you should pay attention to such points:
How to Make a Machine Stand Still
There are several ways to reduce vibration and securely anchor your washing machine to the floor. First of all, you can simply weight the device. Some owners do just that, they put a basin of water, a bag of powder, or a stack of books on the top lid.
The extra weight does add stability to the unit, but it’s not the answer. Such a design not only does not decorate the apartment, but there is also a high probability of squeezing the thin material of the top panel. Easier and safer to use special stands and other products designed to reduce vibration.