How to unscrew the legs of a washing machine

Learning how to remove the transport bolts from the washing machine

When buying a “washing machine” it is important to know the rules of its installation and connection. Particular attention should be paid to the transport bolts, let’s understand where they are on the washing machine, how they look like, how and when they should be removed and put back.

The text is valid for automatic washing machines of foreign and domestic production: AEG, Ardo, Beko, Bosch Maxx, DAEWOO, DEXP, Candy Aqua, Aquamatic; Gorenje, Haier, Hansa, HiSense, Hotpoint Ariston, Electrolux, Indesit, Leran, LG Direct Drive, 6Motion, 6Motion; Miele, Samsung, Siemens, Vestel, Whirlpool, Zanussi, Atlant, Vyatka and others.

Removing the front wall

It’s time to remove the front wall, which has long been staring at us with its sad glass eyes and asked not to remove it. Let us not heed the pleas of humble components: necessity is necessity.

unscrew, legs, washing, machine

But in order to remove the front wall, you must first disconnect the cuff (the rubber band immediately behind the door), so that it stops blocking the panel. Removing the cuff is not a difficult process: just feel for the spring that holds the cuff, and push it, as the cuff immediately loosens, and it can be stowed in the tank so that it is not lost.

Now, by the way, you can begin the process of removing the front wall itself. To begin with, unscrew the screws that connect the front panel to the top, and, accordingly, they are on top. The number of screws is usually 3-4 pieces, no more.

By unscrewing them, the front panel can be lifted: it is held on hooks, in other words, hangs. You probably won’t be able to do it right the first time. Interferes with the lock of the tank, which does not allow the door to open at the most inopportune moment during operation. It must be disconnected. On many LG washing machines, this is done by simply removing the lock with a screwdriver from the slot before removing the front panel.

How to properly balance the washing machine?

How to balance the drum with your own hands

  • Unplug the washing machine.
  • If the machine is full of water, you will need to drain it.
  • At the bottom of the front of the case you will see a small hatch.
  • Using a flathead screwdriver, release the latches and open the hatch door.
  • Place a container, unscrew the filter from the housing.

How to adjust the feet on a washing machine correctly

If you installed a washing machine, and it does not stand in one place because of vibration, as if trying to “escape”, and even bounces when you spin it, then you probably installed it wrong. And even if the floor of the kitchen or bath seems “to the eye” flat, it does not mean that they do not have relative to the ground any deviations.

See also  What temperature should I wash dark clothes at?

The need for proper installation of the washing machine

Therefore, the question of why you need to install the machine correctly can be answered as follows.

Let’s say you bought a good quality, new bed, but there is something wrong with it, something is missing. Then you realize that you are missing a mattress. When a special mattress is purchased and installed in place, of course, to sleep on it becomes much more pleasant and softer. The same principle is used for the washing machine.

How To: LG/Kenmore Leg Assembly AFC72909501

In order to level the washing machine it is necessary to use the method that is described in the instruction manual, that is. twist or unscrew the feet of the washing machine.

And in order to do everything qualitatively and correctly, on the cover of the machine set the construction level.

It will show how we need to act and we can proceed directly to the adjustment.

Some machines, such as LG washing machines, have clear instructions in the manual that it must be perfectly level. If you neglect these instructions, then as soon as you start using this household appliance, you can immediately begin to prepare yourself for repairs, and unplanned ones at that.

Parts that can break from improper installation of the machine

What breaks first of all?? Mainly the parts that are subject to mechanical stress.

They are needed to dampen the vibration of the feet of the machine when spinning.

If the automatic machine is installed unevenly, then the wear and tear of the shock absorbers is uneven, and with prolonged use, it can even break down.

This can cause a lot of runout, which will hasten the collapse of the rest of the machine.

unscrew, legs, washing, machine

Bearings. Even a slight misalignment puts extra load on a bearing group. While this may go unnoticed with a small load of the washing machine, when the drum is at its maximum speed, the imbalance will be clearly noticeable.

Therefore, if you find it difficult to adjust the feet of the washing machine yourself, or you do not have the necessary tools, please contact the professionals.

There is another reason to adjust your washing machine. stagnant water.

In a skewed machine forms a place of stagnant water, which the pump can not fully remove. In this place will be a whole accumulation of germs that can get on clean things.

How to adjust your washing machine yourself

  • Tools.
  • Dowels.
  • Liquid nails.
  • Plywood.
    First, you will need to check the surface on which you are going to install your washing machine. If the floor is uneven, then it does not matter what kind of coating he has. tile or concrete. the machine will still not be as it should. This means that even with a slight vibration of the machine will still jump and slowly move from its original location. If this applies to your case, you need to level the floor, and then you do not even have to adjust the washing machine. If you have a level floor surface, then you should look at how the feet of the washing machine. To do this, gently wiggle the machine back and forth. You can also slightly tilt it sideways. This is to see which feet should be raised for adjustment. Now proceed to the process of adjusting the washing machine itself. To do this, those feet that need to be raised, should be unscrewed (or rather a washer on them), and then rotate the leg clockwise or counterclockwise. This is the adjustment process itself. To check the accuracy of the installation, use a construction level. Ideally, the level bubble should be located in the center. To measure it will be most convenient to put the level on the machine itself and make adjustments. To adjust and align certain types of machines, you can use an additional device. Take a plywood sheet and cut out of it the base for the machine. Next you should attach it to the floor with dowels or liquid nails.

  • Folk method can be called the following operation: wipe the floors with very sweet water and immediately put your newly purchased appliance on them. It should stick to the surface. Frankly speaking, the method is questionable, but those who have done so, assure me that everything went perfectly.
See also  How to clean the drain hose of a washing machine

Breakage of internal components, such as shock absorbers, buffers and counterweights, usually causes the washing machine to shake and shift when wringing.

What else you need to know about the installation of the washing machine

Now we know how to adjust the feet of the washing machine and achieve a stable position. But its installation will require observing a number of additional recommendations:

Always connect water through a separate connection with its own tap. in the case of a leak, you can quickly shut off the water; The level of the drain hose (in height) should not exceed the norm. look in the certificate and find out how high can be raised drain hose; Do not connect the washing machine through extension cords. make a separate socket for it and equip it with a safety switch; Avoid squeezing the inlet and drain hose to prevent damage; Do not place any heavy or fragile items or appliances on top of the machine. their vibrations may cause them to fall and injure you; When fitting the machine, do not forget to remove the transport screws from the rear cover. they are essential for safe transport of the machine, and must be removed when in use.

Having fulfilled all the requirements and set the machine on the construction level, you can safely proceed with the washing.

4 Pack Washing Machine Feet Pads Anti Vibration Non-Slip Shock and Noise Cancelling #shorts

Installing the washing machine according to the level

Having set the construction level parallel to the front wall, you need to adjust the front legs so that the air bubble is exactly in the middle. This will indicate that the front is level. After that, move the level parallel to the side wall and do the same operation with the back legs. At the same time, make sure that the machine is level and does not swing to and fro. The final result should be a position in which the body of the machine is stable and the level indicates a strictly horizontal position (both at the front and the side).

Once we have achieved the correct position of the washing machine in its place of installation, we can proceed with a test wash. If during washing (especially during drum acceleration) you notice slight vibrations, it is normal. The main thing is that the washing machine does not move out of the way, trying to “jump” to the side.

Individual specialists can carry out the installation of the washing machine by the glass of water on the top cover, but the accuracy of the construction level is somewhat higher.

Recommended : How to build a small bathtub

Can the top cover of the washing machine be removed??

Removing the top cover of the washing machine does not require thorough preparation, and from the tools you will need only a screwdriver. give preference to the cross type. Important! The top panel is bolted to the back. Therefore, if your washing machine is installed against the wall, you need to extend the machine.

See also  How to install a coffee machine on the street

Now you can proceed directly to the dismantling of the top of the washing machine:

  • go around the washing machine;
  • find and unscrew the two screws holding the top cover (they are under its protrusion near the right and left corners of the machine body);
  • Take hold of the lid and pull to yourself literally a few centimeters;

Another reason for strong vibrations

It so happens that the strong vibration is caused by irregularities in the supporting surface, which can not be corrected. Or local wear and tear of the support surface under the feet has occurred after long use of the machine. As a result, the device is unbalanced during operation and the machine begins to jump and shake.

If adjusting the feet does not solve the problem, you can use an anti-vibration stand. It will reduce vibration and noise, and prevent further damage to the flooring. This is made of plastic and comes in a variety of shapes and sizes. You can buy it in stores of household appliances.

How to Adjust a Washing Machine by Yourself

The store staff have told you that the machine must be installed by a technician? Give up on it. by following our instructions, you can install and adjust it yourself. The most important thing we need to do is to properly adjust the feet of the washing machine. Among the tools we need the most common construction level. The first step is to choose the place of installation. It is desirable to have a concrete floor with good stability. In some cases, under the machine create a separate concrete screed, so that it stands on a solid base (this applies to houses and apartments with wooden floors).

When installing the machine, it is necessary to think in advance about the conditions and mode of its operation. Accordingly, measures can be taken in advance to help avoid problems later on.

In a private home

When building or repairing a private house, you can create the necessary layout of pipes and electrical cables even at the design stage. If there is a dry basement in the house, the washing and drying equipment is often installed there. In this case, the residents are not disturbed by noise, odors and dampness.

In the kitchen and in the hallway

The washing machine is easy enough to fit into the kitchen interior, although the washing process itself does not mix well with cooking and eating.

In the corridor it should be installed only in the most extreme case.

In doing so, you will have to deal with many issues:

  • Where to find a place so that the machine does not interfere with walking and opening doors;
  • How to hide the laid communications (in the floor, walls);
  • How to hide appliances from guests’ eyes (built-in closet, curtains).
unscrew, legs, washing, machine

On the wooden floor or laminate

The ideal hard and rigid floor to install is concrete. On wooden floors, the vibration of the machine is amplified and destructive to the unit itself and surrounding objects. Various options for reinforcing the floor:

| Denial of responsibility | Contacts |RSS