How your refrigerator should be leveled

Leveling your refrigerator

After transporting the refrigerator, it is important to choose the right place with a level surface for it. Many homeowners use tile as a flooring material during renovations. Despite all the advantages, tiles can create a slip of the refrigerator on the surface. To avoid this, you should use special pads under the feet, which can be purchased in a home appliance store or order in the online storefront.

your, refrigerator, leveled

The refrigerator installation instructions say that the unit should stand on a level surface. This can be checked by opening the doors of the appliance: when the doors are opened or closed, there must not be any creaking or unusual noise. If there is one, you should check the correctness of the installation, or call a master from the service center.

Having put the refrigerator in its place, it is necessary to adjust the legs so that the refrigerator is set on the level. For this it is necessary to use a special tool “level”, which is in the arsenal of almost every owner.

It is important to understand that after the refrigerator is installed, you can not immediately begin to wash it and connect it to the power supply. It is necessary to wait for a certain period of time, 4-8 hours on average. This is necessary for the refrigerator to cool/heat to room temperature after transportation.

How to set up your refrigerator correctly

Buying expensive household appliances, it is necessary not to forget that it must serve more than one day. The proper installation of your refrigerator affects not only how you use it, but also how long it will last and work reliably.

Before you buy a refrigerator, you should take into account that it is quite a bulky unit. It is not designed for frequent moving. Before you install your fridge, you need to determine the place where it will be permanently located.

What tools will be needed

Installation of the refrigerator does not require a wide set of tools, below will be listed all the items that may be required when installing different types of apparatus:

  • Wrench. you will need a wrench to adjust the legs, it is often included in the package;
  • liquid or laser level. it is needed to adjust the unit in the horizontal and vertical plane, to install it “level”;
  • Plumbing wrench (“alligator” or pliers). if the refrigerator with an ice maker, it will need to be connected to a pipe with cold water;
  • rubber tape (packing). to seal the connection between the pipe and the hose (only if there is an ice generator);
  • Screwdriver or screwdriver. they will be useful for mounting decorative panels on the door of the unit if the built-in appliances are purchased.
See also  How often you have to fill up your conditioner at home

Important! After unpacking the box, the refrigerator needs to adapt to the temperature conditions of the room, for this before connecting it to the network. wait from 6 to 12 hours. If it has stood outside at sub-zero temperatures for a long time, it is better to increase the time to connection to 24 hours.

Mounting a built-in refrigerator by yourself

The main rules of installation

Not only does following the installation rules increase the service life of your refrigerator, but when they are followed, the unit will function at its best. It is not recommended that the following objects are located near this unit:

  • Sink. The unit to be installed is, after all, an electrical appliance. And as we know, the contact of damp environment with electricity is inadmissible. It can lead if not to tragic consequences, then certainly to a short circuit with a high degree of probability.
  • Stove and oven. The refrigeration unit will work more efficiently if the atmosphere around it is not warm. The distance between these devices must not be less than 60 cm.
  • Window. The sun’s rays will fall on the refrigerator next to the window in summer and warm its walls. This should be excluded.

When the compressor is running and the chambers have begun to cool intensively, the refrigerator converts energy into heat and releases it into the environment. Therefore, for better functioning, you must ensure a free space behind the back of the product not less than 10 cm, and between the side walls of it and another object. not less than 3 cm. In this position relative to the walls, the air will circulate normally and the heat will easily escape from the appliance.

Don’t forget the power outlet. It must have an earthing connection. It is advisable to plug the appliance directly into the power grid, without any adapters or extension cords. If there is a possibility of turning on the unit using a voltage regulator, it is advisable to use it. This improves the unit’s performance over voltage fluctuations in the mains and will extend the life of the compressor.

Installation instructions for the built-in refrigerator

Requirements for the location of the unit in this case do not differ from the conditions of placement of conventional models. An additional point is a limitation in the parameters of the area for installation. It is necessary to take into account the size of the device, so that there is enough air space around its walls for free ventilation of the atmosphere. On built-in models, no trim is provided at purchase. Decorative panels are selected according to the room design and mounted on the skids or brackets supplied with the fridge.

See also  What's the reason if the refrigerator does not turn off

How to install your refrigerator: tips for the user

Buying equipment is just the beginning. Next, you need to choose a place for it, properly install, connect, and in the case of the refrigerator even distribute shelves and so on. Our article will help you in this very best way.

Features of the location of the refrigerator

Refrigerating equipment, if the kitchen area allows, is placed there. On the question: “Is it possible to put a home refrigerator close to the wall?”, specialists answer negatively. This item, creating cold inside, releases a large amount of heat into the surrounding space. When placed close to the wall, the latter does not go anywhere, the appliance constantly overheats, freezes poorly and eventually completely fails. No less dangerous “neighborhood”. stove, heating radiator.

The specialists do not recommend to install the refrigerator closely to the wall.

A fridge built into the cabinet is a very popular modern solution. But from the door to the front of the appliance also need to leave room: not less than five to six cm. On the sides, nine to ten. on top.

Tip:. The concrete recommendations for installation of this or that appliance, are described in detail in the enclosed to it technical passport.

Built-in refrigerator in the kitchen design.

See alsoProperties of refrigerator storage at low temperatures

The correct installation of the built-in and freestanding refrigerator

Buying home appliances, such as a refrigerator, is only half of the job. The next step is to choose the right place for its installation, the installation of the refrigerator itself and its proper connection.

Many people do not like to understand all the nuances of installation themselves and prefer to turn to knowledgeable people or specialists with certain qualifications. In fact the procedure is not so complicated. Just need to know the basics.

Installing a refrigeration unit at home

Problems due to improper installation

It is worth remembering that if you install the refrigerator by yourself, you will also be responsible for its correct or incorrect operation after such installation. So, if we make a mistake during installation, there will be no one to blame. over, in particularly severe cases, we can even lose the warranty for the refrigerator. So what can the incorrect installation of the refrigerator lead to?? Of course, installing your refrigerator in such a way that it will initially malfunction or not work at all is unlikely to work. Your refrigerator is sure to start and the problems will appear, but only after some time.

For example, if your fridge is not leveled properly, the door can not close properly, which can lead to the appearance of ice inside the fridge compartment or freezer, as well as the deformation of the seal on the door. That is why we will soon need to replace it. Another problem that can result in turning on the fridge without presetting. The temperature inside the fridge or freezer is not optimal and this will inevitably lead to spoiling of the food. Among other things, if you decide to turn on your new refrigerator immediately after delivery, it can lead to serious damage to the compressor. It is recommended to switch on the refrigerator after transportation only after several hours.

See also  How to calculate the facades on a built-in refrigerator

How to Level your Refrigerator and Doors

Preparing the refrigerator for use

You’re done installing your refrigerator and cleaning it. It’s time to move on to preparing it for use.

To begin with, immediately after transportation, the refrigerator should stand a little. This is especially necessary if the equipment was parked in a fairly cool room. Just while the installation and cleaning will be provided, the device will have time to warm up.

Then, when the refrigerator has had time to adapt to the new temperature, you can plug it in. In the first twenty-four hours after plugging in, the compressor can work uninterruptedly. So excessive noise should not be frightening.

Also if the socket does not provide for grounding, it is necessary to buy an additional mains adapter or simply an extension cord. Both devices will protect the appliances from voltage fluctuations.

Reference! Before connecting it is also necessary to check the manual, because refrigerators of different models, e.g. Bosch, LG, Atlanta, Indesit or Samsung will have some peculiarities of connection. If the connection process is difficult, you can invite a master. He will help with installation and debug the temperature mode.

It is also worth remembering that the refrigeration equipment will gradually reach the set temperature, so if 2-3 hours after turning on the device in the network, cooling is insufficient, do not worry. As a rule, the work of the equipment is adjusted after 1 day after turning on. This is just enough time for the unit to start working properly.

If the equipment is not getting cold for 24 hours after connection, it is worth contacting the store where the unit was purchased. The supplier may have supplied defective equipment, in which case it must be replaced. Call a specialist to repair the equipment in this case. should not. He can tear the terminals, and any intervention during the warranty period under a strict prohibition.

| Denial of responsibility | Contacts |RSS