Inclined hood at what distance from the stove. Features of the installation of hoods of other types

The height height of the hood: “slave” dependence on the hob

The fate of the smallest room in an apartment or private house is unenviable. The culprit of this is the plate. electric and, especially, gas. Daily cooking is accompanied by the appearance of spray of fat, gas combustion products, smells, which sometimes do not delight smell at all. House ventilation ducts do not cope with the task, so you have to purchase a “professional”. a device that cleanses the air. After the purchase, many questions arise, one of them is the height of the hood installation. Incorrect installation with ignoring this parameter will lead to the inefficiency of the device, which means that the microclimate in the kitchen will change little.

All described devices are required to take polluted air forcibly, protect the surfaces from particles of fat and soot. Devices consist of a case, panel, filters and an element that provides forced ventilation. All exhaust systems are divided into two groups:

  • Protic. evacuation. Their functions are forced air fence, which is then diverted in ventilation. The main condition for the operation of such an extract is to ensure a constant influx of fresh air.
  • Recirculation. Their work consists in the evacuation of dirty air, followed by its cleaning using a filter system: fat, coal. Such an operation takes a lot of time, but the main advantage of the devices is the lack of additional highways.
  • Combined, having 2 of these modes, which are switched if necessary.

Both systems have disadvantages. Function devices need a separate connection to house ventilation, so the installation of the duct will become costly if the hood is planned to be installed far from the ventilation duct.

Recirculation systems have several disadvantages. The first is the need for annual replacement of coal filters. Minimum-1-2 times. The second disadvantage is insufficient efficiency if the hood is installed above the gas stove.

Factors affecting the installation

Before the installation, it is necessary to take into account everything that can in the future cause inconvenience during the operation of the device, so they are guided by:

  • Recommendations. standard and those that are spelled out in the product passport;
  • The area of ​​the kitchen space, its interior;
  • type of hob;
  • Extensive performance;
  • its dimensions, the size of the air intake;
  • growth of owners engaged in cooking.

However, any rough deviation from the standards of height during installation is the reason for reducing the efficiency of the hood. A long distance will not allow the device to evacuate contaminated air and drops of fat that strive to “attack” all surfaces. If the owners have high growth, then the best alternative to height will be the acquisition of a more powerful extract.

The proximity of the device to the hob will turn into more serious problems, since:

  • Low.located hood will make it difficult to cook food, will lead to injuries;
  • The surface of the device will constantly overheat, which means that its life will inevitably decrease;
  • Fat filters will be too quickly clogged, which will cause the use of the unit;
  • Perhaps an emergency is a fire, because the risk of fire of fat settling on filters is not excluded.


The hood in the kitchen should clean the air, remove extraneous smells and contribute to an effective air exchange for the comfort of staying in the room. Since the dimensions of the kitchens are often small, this household appliance acquires significant significance. Due to the presence of a large number of brands and brands, the assortment of goods on the market is now quite large, but this is what makes it difficult to make the right choice in favor of a quality product that can work at the proper level for a long time.

To choose the right hood for a gas stove, you need to know what to pay attention to first.

  • The size of the device. It can be small (within 45 cm) and more bulky. The choice should be carried out on the basis of the size of the hob. the larger it is, the more there should be an extract in order to cope with the task as quickly as possible.
  • The operating modes presented by the developer. It is worth evaluating their number and the ability to use several functions at the same time.
  • Assessment of device filters. It is very important that the device has grid and coal filters for high.quality air purification.
  • Features of the control panel. There are modifications that have a touch control panel and those in which there are buttons. The choice is carried out depending on the preferences of the owners.
  • The presence of additional functions. The presence of a timer, backlight, interval inclusion and not only is an indicator of a more universal hood.

The most important role in the operation of the device is played by filters, therefore, choosing an hood, they need to pay special attention to them.

The filters that are inside the device can be fat and acrylic. Thanks to fat filters that are in all hoods, the engine engine is protected. It is noteworthy that it is possible to install disposable or reusable options. A disposable variety is created from a material similar to a synthetic winterizer and acrylic, and reusable is made of aluminum or other metal.

In addition to differences in internal components, hoods may differ in appearance, having a different shape, according to the type of installation and dimensions.

The choice of the desired device must be made on the basis of the size of the room, the size of the hob and the frequency of its use. In order not to make a mistake when selecting this technique, you need to dwell in more detail on the principles of its work.

How does it work?

The principle of operation of the hood is quite simple and similar to ventilation. When you turn on the device, it is possible to remove the burning of the room, unpleasant odors and evaporation from the room. So that the hood can quickly cope with the task, its structure provides for special filters, which must capture any pollution. Another feature of the structure is forced ventilation, which is turned on for effective air exchange, when the amount of pollution exceeds the clean air masses.

Additional functions will be good assistants for any housewife, therefore it is worth choosing a model that will create optimal conditions for working in a small room. When the selection of hoods for the kitchen, it is worth studying its internal structure, paying special attention to the filter system. According to this criterion, there are two varieties of the device:

  • recirculation. allows you to clean the air of dirt and fat by means of filters, after which the same air mass returns to the room;
  • running. thanks to it, air is cleaned, which is drawn from the kitchen and is released outside the apartment using ventilation.

The running hood should be connected to the general ventilation of the house. Due to the presence of an air duct, this process is made conveniently and quickly. Clean air access occurs using windows or air masses coming from other rooms. The recirculation hood has no connection with ventilation, so the same air circulates the same air in the kitchen, cleaning thanks to the device. So that the fence and outflow of air masses occur efficiently, there is a powerful motor in the hood.

The choice in favor of one or another type will help make a ventilation channel that is available in any kitchen of a multi.storey building. If it is located next to the cooking site, then it makes sense to install a running hood, if far. then recirculation. If the house is very old, ventilation can be clogged and it will pass through it with difficulty, in which case it is also worth using the recirculation apparatus or purchase a combined one, which can work in both directions.

This option has both a duct and filters that can be used vision. For the winter period, it is better to use the principle of circulation, so as not to cool the room, and in the summer to use the air air.

To ensure the correct operation of the hood, it is worth placing the device exactly above the gas stove so that the combustion products fall into it immediately and do not pollute the air.

Depending on the appearance of the extract, it can be installed on the ceiling, wall or integrated into the kitchen set. Ceiling and wall variations usually have a design that allows you to make this device organic, easily fit into the room.

The height of the kitchen hood above the gas stove: standards according to GOST, norms

Gas is source of open flame. Therefore, the technique is installed above the hob at a certain distance. Only in this way can you guarantee the effective operation of the device. According to the accepted standards, the distance from the hob depends on the type of hood:

  • Simple ventilation is angular ventilation, ventilation, dome ventilation and flat ventilation. Their feature lies in the fact that the filters are located parallel to the hob. In this case, the minimum installation height is 75 cm, and the maximum is 85.
  • Inclined. the filter is installed at an angle to the hob. The recommended distance is from 55 to 65 cm.


For more comfortable operation of the hob, the height can be adjusted depending on the power of the device and technical characteristics. The growth of the person who will prepare is also taken into account.

To find out at what height you should hang the hood, place the beginning of the measuring tape on the burner and measure the distance in accordance with the technical characteristics. The distance to the outlet should also be taken into account.

Types of kitchen hoods for installation

Devices can be divided into four types, depending on the method of installation. The first is mounted on the wall. The panels are attached to the wall directly above the hob, taking into account the distance from the floor surface to the lower level of the device.

The second type is an angular hood. The principle of their installation is clear from the name itself. These models were not widespread due to low demand. The same applies to the devices that are installed in the countertop. Other disadvantages of hoods are high cost and limited power.

The fourth option is an island version. They are installed on the ceiling directly above the hob. The height of the gas hob does not matter. the distance can be adjusted by changing the size of the ventilation pipe. These models often become an element of design.

What to consider when installing?

If you have a compact room for cooking, then by purchasing a voluminous ventilation structure, you risk creating inconvenience to yourself and your family. In this case, it will be advisable to take an hood and install it in a closet on the wall if it is above the hob or in another element of the interior of the kitchen. The main thing is that he is above the tabletop of the stove. You should select the size of the air intake corresponding to the size of the plate over which it will be installed. If the dimensions are smaller, then the air fence will not occur completely, therefore, the air will not be cleaned. But if the device of air fence is slightly larger than the stove, then there is nothing wrong, it is even better.

Dimensions and characteristics affect the height of the exhaust device above the stove. Low power systems should be installed at a height of at least seventy.five centimeters. If the power of the air intake exceeds five hundred and fifty cubic meters. m/h, the distance from the surface of the cooking to the edge of the device should be increased.

The angle of inclination of ventilation will also affect the height above the stove. If it is zero, then no changes in height should be made. But if an angle appears, then the distance from the lower edge of the exhaust device to the surface of the plate should be about sixty centimeters. The exhaust installation works on the stove, where the temperature reaches high values. Due to large dimensions and incorrect installation on the hood, fat spots can accumulate, then it itself will be polluted. You should know that pollution and spots are easily ignited and, therefore, if the hood and its pollution is improperly installed, fire may occur.

Ventilation, like any electrical device, needs power. When installing, you need to take into account whether the outlet is overlapped or not, as well as the distance to it. At the factory during the production of exhaust devices, they are equipped with a short electric cord. The most rational option is that the outlet should be higher than the unit by ten to thirty centimeters and shifted twenty centimeters relative to the axis of the symmetry of the device. This is important due to the fact that a pipe for air removal will go directly along the axis of symmetry.

The duct of the device has its own design, for the most effective air intake, it must have a minimum number of straight angles, and should also not be experienced anywhere, have distortions. It is necessary to clean the duct, as it tends to block. When blocking, the area of ​​the passage is reduced, so the air does not enter in full. So reduces the efficiency and performance of the device.

The installation of ventilation is a responsible lesson, how the whole system, its effectiveness and productivity will work on the correct installation. What to consider when installing? First of all, it is necessary to decide what type the ventilation will be: circulation, running or mixed. After that, you need to determine the type of ventilation: straight (ordinary), inclined or Each of them has its own way of installing and its own tricks, each of them also has its own pros and cons of.

Direct hoods

Ordinary hoods often have the shape of a trapezoid or rectangle. Installed above a gas or electric stove. As a rule, the unit is mounted on the wall, as it has large sizes, so installing it in a cabinet is not an easy task. You need to pay attention to the accessibility of the outlet. The lower edge of the ventilation should be higher than the plate by at least sixty.five centimeters and below ninety centimeters so that the efficiency of the exhaust device is not lost.

The opening for ventilation deserves attention, not in all houses, designers set holes as conveniently residents. There is a way out of the situation, this is the use of a flexible corrugated pipe or a hard plastic pipe for air ducts. To reduce the noise level, it is recommended to stretch. The hood should be firmly attached to the wall, it is worth first to prepare the wall, drilling holes in it with a bypass and inserting dowels. After strong fixation of the unit, further installation of the air duct occurs.

Exclusive hoods

The main thing in the installation of inclined ventilation is to check whether it prevents the opening of hinged cabinets. For small rooms there will be enough hoods of fifty centimeters in size. If the room is often subject to pollution or large in area, it is recommended to install air intakes in size of more than eighty centimeters. If the extract model with the function of air removal, then you need to additionally install the ventilation pipe and seal the seams that will appear.

If the unit works autonomously without air removal, you will only need access to the mains. The distance between such an extract and the hob should be more than sixty centimeters, if the plate is gas and fifty centimeters, if it is an electric stove.

How to measure and install?

In the process, vibration of the pipe is possible. In order to avoid its deformation, it is recommended to leave a little space between the extract pipe and the ceiling. You can install both yourself and resort to the call of the master. Installation of the ventilation system is carried out in several stages. Measuring roulette measured the required height from the stove to the proposed beginning of the hood. Using a special level, a fishing line for a trimmer is carried out, parallel to the horizon. It is a height limiter at which the lower part of the air intake body will be located.

After the line, you need to find its center and draw from it perpendicular to the level using the level. this fishing line for the trimmer determines the place where the duct will be located. Next, we measure the device and approximately compare its dimensions with already marked lines. If the upper line of the unit will rest against the ceiling, then the duct will need to be shortened so that the air intake body does not drop below the mark where it cannot function normally.

Next, measure the distance from the lower face of the device to its upper mounts on the case. We draw perpendicular lines to the lower horizontal, and connect the ends of these lines to each other to make two parallel lines (upper and lower). On the upper horizontal we measure the distance from the center, noting the location of the unit mounts. Using a drill or a pedorator, you need to drill holes in the wall, insert dowels into them, into which the screws will be screwed in the future.

It is recommended to install the device on the wall from its upper part, after the top is installed. The device should be leveled along the lower horizontal and finally fix it on the wall. At the very end of the work, a pipe from corrugation or plastic canal is attached to the air intake. It is recommended to hang the air intake after a thorough preparation of the kitchen, after all the procedures for measuring and reading the relevant documentation. At each factory, instructions for installation and operation are attached to the exhaust unit, which indicates the parameters for installing a specific type of device.

On average, the lower edge of the hood during installation should be higher than the plate by 65-90 centimeters. If you install below the required height, it becomes possible to spoil individual structural elements and ignition of fat deposits on the air intake. Correct installation gives a guarantee of life safety, exactly the same as the correct connection of the device to the electric network.

Since fat drops fall into the device, which settled in the filters of the air intake and outside, and moisture accumulates inside, there is a possibility of a shock if the unit was connected incorrectly during installation.

Also, due to the accumulation of extraneous impurities in the cross section of the pipe, the area of ​​passing air decreases and the productivity of the work is lost. When installing the ventilation channel, be sure to make sure that it does not block the only hole into the room. Otherwise, fogging windows, the remnants of an unpleasant odor in the room is possible. If you have one outlet, then you should break through an additional exit from the ventilation shaft and install the air output valve there. The valve will close the air supply of the flow when the air intake is turned on. For houses outside the city, the best way is to break through the second hole in the wall for the duct channel.

It is necessary to pierce so that the channel does not affect the existing hole. A pipe from the unit is displayed in a drilled hole. At the end of the hole, the check valve must be installed so that the air outside the house does not get through an additional hole inside. In a standard apartment of an apartment building, it is not always possible to make a second hole. In this case, there are two ways of solving: expanding the channel or using a special adapter, which has two holes. The installation of an exhaust device can be done with your own hands if you have sufficient qualifications and knowledge, but experienced people advise calling specially trained workers to perform the installation of hoods.

Ventilation of the kitchen

The anti.breeding valve is present in the modern vendes of the kitchen

What does “good ventilation” in the kitchen mean? It is clear that modern cuisine is a whole set of kitchen equipment that facilitates the hostess of cooking. This includes: stove, oven, microwave, toaster, multicooker, loaf of the Oopeck and other “assistants”. To prevent various odors from getting from the kitchen, you need to equip it with a high.quality ventilation system. It can be general or local.

  • General exchange provides air exchange of the entire kitchen premises. There is an supply, exhaust, supply and exhausted and focused on the removal of smells, burning, excessive moisture.
  • Local. saves the premises from smells from a direct place. For the placement of the kitchen. this is an extract that is installed directly above the hob. Such a device as a kitchen umbrella is often installed in private houses, where large rooms of the kitchen are either connected to the dining room, or where they often cook food.

Arrangement of the duct

The duct should not be with a large number of bends, as this will significantly complicate the withdrawal of contaminated air. It is desirable that the pipes are short, straight and contain a small number of knees. Changing the direction of the duct is carried out in a place with a large bending radius. The diameter of the outlet pipe must correspond to the hole in the design of the exhaust device. It is not recommended to deliberately narrow the holes and mount the connecting elements between them. This complicates the free flow of air, respectively, a large load on the operating engine of the hood is created. Excessive noise may occur.

Most often, these designs are made of thick foil, and then masked by PVC with boxes/drywall so as not to violate the interior of the room.

Features of installation of kitchen hoods

For the apartment to be reliably protected from the spread of smells from the kitchen, high.quality ventilation is required.

Ventilation systems are of two types:

The general exchange is called so because it provides circulation of the air of the entire kitchen room. It is supplied, exhaust, combined, ensures the removal of odors and steam.

Local draws odors and various aerosols directly from the place of cooking. In other words, this is an exhaust device that should be installed directly above the surface of the plate.

Important! Whatever the type of ventilation is chosen, it is necessary to remember its supply and exhaust purpose. When installing an hood, take care of the influx of fresh air and the presence of a ventilation shaft for the discharge.

Other factors affecting installation features:

  • types of kitchen plates (working on gas, electricity or induction);
  • required (calculated) power;
  • connection method;
  • The length or size of the hob.

According to the principle of operation of hoods, there are two types:

Each of the above factors is reflected in the choice of the product and on the installation method, location and other features.

The exhaust device for gas plates should be more powerful, since it is located much higher above the hob, unlike electrical plates.

Setting running ventilation requires solving the problem of placing the plate itself. It should be located at the maximum permissible distance from the input hole of the ventilation shaft. An increase in the length of the duct is fraught with tangible loss of extractive power and a decrease in the efficiency of its operation.

The circulation version requires increased material costs due to the frequent replacement of the filter element. The closer to the working surface hangs the hood, the faster the filters clog and lose their performance.

inclined, hood, distance, stove

Factors affecting the location of the exhaust structure

Factors that determine the ideal placement of the hood over the hob:

  • safety and ease of users when working in the kitchen;
  • the efficiency of the exhaust device;
  • Exhaust protection from overheating.

If you place the device too low, there is a risk of creating a fire hazardous situation and significantly complicate the work at the stove, obscuring the review. It seems to many that with this location, not only smells, but also minor splashes will be removed, but this is a delusion.

With the maximum removal of the hood from heating elements, the life of its operation increases, however, the effect of its operation will be not enough.

The golden middle is determined by the experimental way. Using a roulette or a similar measuring tool, preliminary measurement is made and calculated.

The following source data are noted:

How to Choose the Right Range Hood

  • type of plate or hob and its dimensions;
  • the principle of operation of the exhaust device, depending on its own preferences and conditions in the room;
  • kitchen design style, color characteristics.

According to these parameters, they choose an hood, after the purchase they get acquainted in detail with the technical leadership, the recommendations for installation and connection.

Advice. A rectangular piece of cardboard of the corresponding size is suitable for the manufacture of the layout of the product in full size. The layout will clearly demonstrate all the features of the location of the hood until its final consolidation.

The nuances will appear immediately. Wall cabinets, shelves, communications are also factors on which the height and position of the hood over the hobs depend.

Using a cardboard template, it is much easier to determine the exact place where the purchased exhaust device will be installed.

How to measure the distance from the stove and countertops with the stove to the hood

When measuring the distance from the stove to the hood, the type of technique is taken into account. Depending on the type of device, the measurement is carried out as follows:

  • Direct ventilation devices-dome, built-in, flat, island, corner, T-shaped. Measurement is made from stove to filters.
  • Inclined. The distance is measured from the surface of the kitchen furnace to the lower point of the ventilation technique.

Measuring the height with a roulette, with the help of the level they transfer the line to the wall. This will be the lower border of the hood, on which they are focused when installing it.

The consequences of an incorrectly selected location

The placement standard is not defined by chance. Any unauthorized change in distance entails unpleasant and even dangerous consequences.

If you hang the hood below the established norm, this is fraught with:

  • overheating of the device;
  • ignition of soot, dust, fat, settling on hood filters;
  • the complexity of cleaning the device;
  • overlapping of a shaping panel.

Due to the low location, the user will often touch her head, hit her. The preparation process will become less convenient, especially for people of high growth.

The consequences of too high location:

  • decrease in efficiency, since a highly located device absorbs smells and boosts of combustion worse;
  • difficulties in servicing the device;
  • Due to the weak absorption of unpleasant odors, the user more often includes the device for maximum power, which leads to the noisy operation of the device and increased electricity consumption.

Options for mounting the kitchen hood LC958WA60

It is curious that the designers suggest not to lay any ducts at all In combination with the withdrawal of cooking products, use the check valves if necessary. This mechanism, when off the hood off, will not let air masses from the ventilation shaft into the kitchen (or from the street).

Decide what height to hang the hood, and then hammer through the wall the hole outside. This procedure provides for one of the installation options. The hole is round, in the shape of the corresponding output of the upper section of the cabinet for the kitchen hood.

It is understood that we have a private cottage, and we hole the walls, as we want. As a result, there will be only one turn of the exhaust tract, which will reduce performance by 10%. The question is still worried about what to do when the equipment does not work. The fact is that in cold climate the air from behind the wall will immediately rush inside. This option seems suitable for warm climate or restaurant kitchens.

In the latter case, equip the steel hatch outside and close after the end of the working day. Even if the thieves manage to open it, to climb through a hole with a diameter of 15 cm, no one can. But it will be possible to set fire to the institution, so act wisely in our forensic country.

The second option is less producing and radical, but safe. Will have to hammer the wall, and in the same place. But in this case, it is implied that the extension tract of the ventilation system passes in the extension. We break through the hole to it and get two bends (these are only those in sight). As a result, we lose 20% of performance.

inclined, hood, distance, stove

But thieves are already inaccessible to mansions, as well as arsonists, as well as in winter, cold air will not go inside the room. But the vertical tract of the ventilation system is far from always passing behind the wall. On this occasion, we note that the owners of private cottages are free to dispose of property at their own discretion, therefore, even if the project did not provide for the creation of the vertical tract of the ventilation system, then you can reconstruct.

Please note that for previous installation options you need a telescopic cabinet for a kitchen hood. This case also provides for the presence of such

But now we will take the products of combustion through a round duct up. We do not offer to break through the ceiling at all if this idea has come to mind. The manufacturer is prudently silent how to carry out these actions.

It is allowed to draw the same corrugation behind an artificial gypsum cardboard decor or apply hard ducts. In the latter case, there will be a bunch of turns that will reduce performance. But with corrugation it is not so simple. The inner surface is ribbed. Dust and fat settled on it. In addition, large resistance to air is formed. That is why it is recommended to use air ducts from corrugations in a straightened form, which is not always possible.

Fastening is carried out by special clamps. Better if there is a flare with a check valve. This allows you to simultaneously connect the exhaust output to the ventilation hole in the kitchen and does not prevent ventilation.

This manufacturer provided for all. If a telescopic cabinet is not needed. For example, it does not fit in the suspended section of the furniture, where they were going to place the hood, then you can not use the telescopic cabinet at all. Even in this case there are two options:

The height of the kitchen hood is the same as before, but now the ducts are attached to the body. If necessary, a special adapter of plastic is used. In this case, the guidance of beauty falls on the shoulders of the owner of the kitchen hood. If earlier the telescopic cabinet created a lovely picture, now this is our concern.

What type of duct will we conduct installation, as well as purely our business. This is the latitude for improvisation, and at the same time.

The latest setting option concerns the work for recirculation. At what height to install the hood, we already know, it remains to attach the telescopic cabinet to the case so that it takes out to the ceiling and make sure that the special output grille on the lower section is not blocked.

Do not forget to check that the filters are in place. If the previous options will cost in extreme cases a pipe for discharge of combustion products, now the kitchen hood will be thrown back into the kitchen. He will not clean anything.

Strive to keep the filters clean. Already mentioned how it is done, but the recommendations were common. It is much better to read the instructions that are included in the kit, where it is indicated at what height to attach the hood, and how to care for the equipment properly for the equipment.

Height from the stove to the hood of inclined and horizontal

Before you understand at what distance from the plate to install the hood, it is necessary to consider the main types of exhaust devices, which is the main factor when calculating the distance.

As for the operating mode, the following three types are distinguished, which have their own characteristics:

  • Recirculation. an extract that sucks the air with fans, passes it through coal and fatual filters and returns fresh air back into the kitchen;
  • Running. an extract that sucks the spent air, drives it through a fat.based filter and directs it outside the house using ventilation ducts;
  • Combined. universal version, the mode of which can be switched using the control panel.

In their form, the following varieties of hoods are distinguished:

  • (installed in a cabinet or other object);
  • Island (used in large kitchens);
  • Suspended (flat hood, which is installed above the stove);
  • Sliding (type of type).

An important criterion: in the shape of the air receiver, the hoods are divided into the following varieties:

BEST RANGE HOOD. Top 8 Best Range Hoods In 2021

When selecting the height of the hood installation above the stove, it must be remembered that it is important to consider the dimensions and shapes of each type of device for installing equipment strictly above the hob. Exposure manufacturers recommend the following indicators of the height of the hood above the stove

Exposure manufacturers recommend the following indicators of the height of the hood above the stove. They look as follows:

  • The horizontal hood is best placed at a distance of 80 cm;
  • The inclined hood is best installed at a distance of 60 cm;
  • If the straight hood above the electric stove, then the distance is 70 cm, inclined. 50 cm.

It is important to note that the indicators are designed for an average kitchen with an average person’s growth, so it is necessary to individually calculate the height so as not to experience inconvenience during cooking

Inclined hoods

So, at what height are hoods of inclined type? The peculiarity of the design of such exhaust devices speaks for itself: the air is absorbed by the fans, which are located in the upper part of the case. Accordingly, the equipment must be installed lower than the horizontal type.

The manufacturer is recommended to hang the exhaust device above the stove at a distance of 60 cm. This is an optimal indicator that will make it possible to use the potential of the device. Also, at such a distance, the case will not interfere with a person during cooking.

The inclined principle of the structure of the case is very convenient, because the user gets more opportunities to dismantle the filter for its subsequent cleaning or replacement.

Also, inclined hoods have a minimum risk of fire. The fire rises strictly up, so the contact with the device will be minimal.

If the choice fell on a hood of an inclined type, it is important to take into account the height from the stove to the installation of the kitchen wall, so it is best to develop a plan for the kitchen room in advance

Horizontal devices

What is the distance from the hood to the stove? The distance of the hood of the horizontal type above the hob is different from the above example. Manufacturers indicate in the technical documentation to the device an indicator of 80 cm.

However, many models are characterized by their performance. For example, a weak exhaust device should be located below to cope with the traction of the exhaust air.

It is also important to take into account the height of the ceilings, because, if you install the hood back to the ceiling, then there will be no room for connecting the case with the elements of the ventilation system, which is important for the normal operation of the equipment of a prototype type. Also, do not strictly invest in size if a person’s height is higher than average indicators

Preparation should be pleasure and accompanied by comfort. That is why you should correctly calculate the most acceptable height

Also, do not strictly invest in size if a person’s height is higher than average indicators. Preparation should be pleasure and accompanied by comfort. That is why you should correctly calculate the most acceptable height.

It is recommended to take responsibility to the choice of island hoods. The distance must be calculated before the acquisition, because then it may turn out that the dimensions of the device do not coincide with the optimal distance between the exhaust and the stove (gas or electric).

At what distance from the stove should be installed hood

Why this factor experts assign such an important role? And the answer is simple: the correctly selected height will achieve the highest efficiency of the device and ensure the maximum possible service life.

Important! Too low location of the device, limiting the possibility of free access to kitchen households, will make the process of cooking uncomfortable uncomfortable.

The standards of distance from the stove to the hood

To date, manufacturers offer two main types of hoods: horizontal and inclined. The installation height of each of them is different.

The horizontal exhaust structure is installed in the parallel plane plate plate. If we are talking about electric, including induction, hob, then the height of the extract is 65-75 cm.

With the installed gas stove, the height of the exhaust structure is slightly increased due to the use of open flame. And in this case, the distance to the lower point of the hood is in the range of 75-85 cm.

Injected exhaust devices are created with the working surface of the stove of the stupid angle. Thus, a decrease in the height of the location of the hood is achieved, without prejudice to free space. But the design form under consideration requires greater power and energy costs without improving the quality of cleaning of the atmosphere of the kitchen.

Included models are attached at a distance of 35-50 cm from electric stoves and 55-65 cm from gas.

On the kitchen equipment market you can also find the following extracts of hoods:

  • made in the form of a dome;
  • installed above the kitchen island (island);
  • made in the form of the letter “T”;
  • intended for installation in the corners of the room.

These types of exhaust devices are rather subcategories horizontal on the plane of the location of structures. And among themselves they are distinguished by the design and intricacies of installation. Requirements for fastening height relative to the hobs remain unchanged.

To finally determine the right amount of centimeters when installing will help the instructions attached to the selected model. The recommended values ​​are affected by the size of the kitchen and personal preferences of the owners. Sometimes the hood is mounted below or higher than the optimal level, taking into account the distance from the floor to the ceiling.

Factors that must be taken into account when calculating the distance from the stove to the hood

What moments should nevertheless be guided by calculating the optimal attachment height of the hood relative to the stove?

First of all, we are talking about the type of kitchen slab. You also need to take into account the dimensions of the kitchen room, the nuances of the layout and the design solution, the type and indicators of the power of the exhaust device, the growth of users.

inclined, hood, distance, stove

Important! The kitchen hood should have a sufficient supply of power to provide more than tenfold aeration (air exchange) of the kitchen space. Productivity is necessarily indicated in the instructions for the operation of each model.

The productivity of exhaust devices required for a specific kitchen is calculated by a simple formula:

  • PR. actually the performance or speed of removal of “old” air;
  • V is the volume of the kitchen calculated by the variation of its values ​​(length, width, height);
  • K is the value of the reserve or its coefficient in the value of 1.3.

An important role is played by the maximum heating temperature. The higher this indicator, the greater the distance should be between the stove and the exhaust device. As already mentioned, with a gas stove, the height of the extract increases by 10 cm.

the main user of the hobs should also be taken into account when installing the hood. If the hostess is a high woman, then it will definitely experience discomfort, when hanging right in front of the eyes of a horizontal structure. Naturally, in this situation, the hood will have to be fixed a little higher. And the most optimal solution will be the choice of a ventilation device of an inclined type.

Reference! In order not to lower the performance of the hood due to the need for a higher location, you should give preference to models with increased power, which compensates for losses with a forced increase in the distance from the stove.

Fix the hood at a height less than recommended, is permissible only in cases where it is due to designer features or low ceiling.

And here you have to come to terms with a reduction in the operational period of the device and the possibility of unexpected breakdowns. In addition, the probability of frequent burnout of the lamps installed in the lower part of the exhaust structures is great due to overheating. In other cases, the norms should adhere to.

Perfectly selected fastening height will provide:

Thus, based on the above, it can be deduced that the optimal distance from the edge of the hood to the plate, which provides maximum safety and comfort is 70-90 cm.

| Denial of responsibility | Contacts |RSS