Connecting a Bosch dryer to the sewer. Installing and connecting the dryers. Connecting the appliance to the supply lines
It is fairly complicated to use a tumble dryer. The washed clothes will need to be hung up by hand in the designated area. Excess moisture is removed by fans that blow warm air into the drying chamber. Electric or air heaters are used for heating. Connecting such a dryer to the sewer does not make sense. It is enough to use the spin mode, and then transfer the things into the chamber of the drying closet.
The design of the drum dryer, as well as the principle of its work, resembles a drying closet. The difference is the special drum that speeds up drying. Thanks to the rotation, hot air penetrates into the fabric much faster. In addition, after using the drum appliance, the need for ironing things is reduced.
This appliance has special programs which enable it to spin and wrinkle items so that they don’t crease. The tumble dryer does not require a sewer connection. It is only needed if it is not possible to load the wrung out items and manually drain the unnecessary water from the tank.
How to install a dryer over a washing machine?
Place the stand for the top unit on top of the washer-dryer. Put rubber gaskets between the lid of the bottom unit and the stand to reduce vibration. Fasten the stand with screws. Place the unit on the stand so that the feet of the appliance fall exactly into the existing slots.
- Hotpoint-Ariston FTCF 87B 6H (EU)
- Electrolux EW6CR428W dryer
- Beko DCY 7402 GB5
- Zanussi ZDP7202PZ1
- Dryer Candy CS C9LG-07
- Siemens WT45RV20OE
- AEG T6DBG28S
- Miele TDB220WP. Model with front loading, in which up to 7 kg of laundry can be completely dried at one time
Ways of placement
There are several ways to install the dryer with your own hands. In apartments and private homes can be installed as follows:
The most popular option. installation of the dryer on the washing machine, which is also commonly called “in-column”. In this case you will be able to save free space, which is especially important in small one-room apartments. In order to install the “dryer” over the washing machine in the column, you need to use special fasteners that come with.
Installation is quite simple. on the body of the washer are installed anti-tipping mounts and special caps. After that, the body of the dryer is capped, the feet are unscrewed and the appliance is levelled. There is also a variant of fastening to the wall with special rails, but it is used very rarely. The only important point. the washer should not be narrow (meaning already dryer), otherwise the stability of the upper case will be questionable.
We would like to draw your attention to the fact that it is strictly forbidden to install the dryer into the column without fasteners and anti-dumping elements. Firstly, these details protect the washer from vibration damage, and secondly, they give the dryer stability so that the appliance will not topple over during operation.
To your attention visual instruction on how to install the dryer on the washing machine:
A simpler solution next to the washing machine. In this case, you will need more space, but at the same time the technique will be more stable and there will be no chance of a negative impact of the dryer on the washing machine during operation. Most often this option is used in spacious houses and apartments with a large bathroom or a separate room, for example, a closet or laundry room. Installation is not difficult, you only need to install the housing in the right place and unscrew the legs so that the technique was exposed strictly to the level.
If you are just renovating your apartment and have considered installing the dryer, you can prefabricate a niche of plasterboard for it. complex, but convenient option. to make a special cabinet for installation in the column. And the first and second idea we recommend to look at photo examples:
And the last option of installation. under the countertop or sink. If the dimensions of the equipment are small, why not save space and install the housing in the kitchen set? This idea is very popular, in addition, if you have chosen a condensing model, the drain will be near, which will simplify the connection of the dryer to the drain.
The choice of location and order of installation
There are different options for installing the dryer, which should be chosen based on personal preferences and space available in the room. Allowable mounting schemes we will consider separately. When installing the dryer, you must have a screwdriver (straight, cross-shaped) and a construction level to level the appliance.
In this case the dryer can be installed in two ways. above the washing machine or directly on top of it (in the column). In apartments with a small area, where every centimeter counts, it helps to save space. However, in a washing machine hatch should not be on top, because the dryer will interfere with throwing in its dirty laundry.
If the dryer is placed vertically, the dryer must never be obstructed on the washing machine. It is obligatory to use the fasteners that come with the device.
If you do not use fasteners during installation, the two unfastened devices will quickly fall into disrepair, and the dryer can easily fall to the floor because of the vibration that occurs when the machines work. If it is too strong, it is recommended to use an additional rubber pad or mat.
When installing the dryer above the washer-dryer, the separate support base can also be used, on which the dryer is directly placed and fastened.
After all the necessary parts have been prepared, proceed to the installation work:
- Take care of the evenness of the mounting surface and think about the flooring, which can be concrete or non-slip tile. The washer must be aligned on the building level. If the surface is perfectly horizontal, continue to install the dryer.
- Screw the fasteners to the washer with a screwdriver. If a stand is available, place it on top of the unit and fasten it with the special bolts. In the space formed between the machine and the stand, lay a rubber seal, which will dampen vibrations.
- To unscrew the legs on the dryer, put caps on them and install the dryer so that they fall into the grooves prepared for them. Cover the outside of the notches with plugs.
- Use a spirit level to level the appliance. To do this, lay it first on the front of the machine (edges should point to the left and right side, respectively), then on the rear, and finally on the sides. If necessary, adjust the height and tilt level.
The best option is to install a washer and dryer of the same brand, as their dimensions perfectly match. They are often made in the same design. In case it was not possible to buy machines of the same brand, you need to choose a dryer that matches the washing machine in depth and width as much as possible.
When positioned in a column, the machines must not be running at the same time. For safety reasons they can only be switched on one after the other.
Compact Laundry Options for Your Tiny Apartment
How to install column units is shown in the video below:
Place the dryer and washer-dryer side by side. This is the easiest way to install, but it requires more space. The advantages of the horizontal layout are:
This way the technique is placed in a spacious house or apartment, in which there is a large bathroom. In this case, the order of action is very simple:
- Before installing the machines, make a suitable floor covering. concrete or tile (laying non-slip tiles).
- Install the enclosures in the right place in a single line for the trimmer and twist the legs to the desired length.
- Carry out a levelling operation.
There are a few more not so popular, but still possible options:
- Positioning the appliance under the worktop or sink. This option is more suitable for the condensing type of dryer because of the close proximity of the drain. Applies to small appliances that can be harmoniously disguised.
- Install in the cabinet. Possible when planning the location of the technique at the stage of repair, because you will have to initially make a cabinet of plasterboard. In it and will be installed vertically washing machine and dryer.
Dryers for things can be classified into 3 main types:
For different types of dryers there are different ways of fixing. For example, the exhaust units must be connected to a ventilation hood. Such a unit dries things by diverting moist air into the ventilation system.
Condensing units function on the basis of the following principle: warm air moves through the compartment with laundry, from which the moisture is derived in the heat exchanger. A special vessel is designed to collect humidity. After the drying of things, you need to drain the accumulated water.
Heat pump dryers operate similarly to condensing units. However, in this case, not the heat exchanger is used, but the evaporator, which receives the moisture.
There are models that need to be connected to the sewer. The water will automatically go into the sewage system. This technique is more automated, but more complicated to install and connect.
The options for installing the machines
You can install a washing machine and dryer next to each other, where there are conditions for this and enough space (in the kitchen, bathroom, checkroom, hallway). In such a placement of the upper surfaces of the two machines forms an area that can be advantageously used. Build a countertop on top, you can hang a hinged cabinet or shelf on top.
In order to save space, it is also a good option. to install the appliances in the kitchen set under the worktop.
Also, in order to save square meters, it is widely practiced way of installing appliances one on top of another: below. washing machine; above. dryer (the opposite is not allowed in any case)!).
The perfect solution for installing the dryer
Washing machine has much more weight than the dryer and therefore, always installed from below. over, the floor must be flat and solid (preferably concrete). Any uneven, soft (carpeting), slippery (linoleum) or rickety surface (sagging boardwalk) will contribute to the already strong vibration of the unit.
To the top installed dryer during operation without slipping on the floor, you will have to work hard yourself, but if you have no experience, it is better to ask the master.
On the body of the washing machine install anti-tipping mounts and special parts (caps). The dryer is installed in them. The stability of such a structure must be absolutely reliable and not cause the slightest doubt.
Another mounting method: The dryer can be attached to the wall above the washing machine.
dryer on the wall
In both cases, installation requires special knowledge and skills. Therefore, trust this work to professionals.
If you are planning a repair, you can prepare in advance a place for the appliances. From plasterboard build a special niche for the installation of both machines.
How to stack washer and dryer. Reroute dryer duct vent
There are small compact models of dryers, designed for only 3 kilograms of laundry. Such a technique can be simply put on top of the table or recessed into a niche in the kitchen set.
Of course, there are many options for placing the dryer in your home. It all depends on the models, on the availability of space in the house, on the number of electrical appliances, etc.д. But mostly in apartments and private homes use the following ways:
The most popular variant is placing the clothes dryer directly on the washer, of course, if its model allows to do so. For example, if the lid for throwing clothes on top, it is better not to place a dryer over it, as this will lead to additional inconvenience.
This type of installation is called “in-column” and in small apartments helps save space. In the set of dryers there are special fasteners, which allow you to mount such an installation over the washing machine.
Important! Never just place the dryer on top of the washer-dryer. There are special fasteners for this purpose. In the usual installation of the dryer on the washing machine, we will lead to a breakdown, both one and the other. The additional vibration that the devices will produce will cause breakage of parts on both machines, since they are not designed for vibration from the outside. In addition, as a result of vibration, the dryer can simply fall from the washer to the floor and break.
Therefore, there are two ways to fix the dryer in this case:
- With the help of those elements that come with the dryer;
- To put the dryer on a self-mounted shelf from improvised materials for this purpose.
Of course, the easiest way to install is to place the devices side by side. But, as written above, not always the area of the apartment, especially if it is a one-room apartment, allows you to do it.
Having decided to place the dryer over the washer-dryer, in order for the washer-dryer to be securely fastened and to last a long time, pay attention to the following details:
- The first thing to do is to install the washing machine, over which we will mount the dryer.
- Install the stand on which the new machine will stand.
- We recommend placing a rubber mat between the top of the washer-dryer and the mat. This will help to reduce the vibrations and therefore the influence of one machine on the other.
- After installing the rubber pad, secure the dryer stand.
- Place the dryer on the fixed base.
- Then glue, paint, putty all the grooves, fasteners, etc.д.
You can then use both the dryer and the washer.
Important! Try not to turn on two appliances at the same time.
This is the most complicated option. It is important to understand that you can not place one machine on top of another without using fasteners.
Other ways of placement, installing next to it, in a niche, in the bathroom, etc.д. Does not require such complexity and the use of additional precautions. Nevertheless, each of them has its pros and cons.
Photo Hunt: 27 ideas where to place the washing machine
Bathroom, kitchen, in rare cases corridor (if you are willing to engage in waterproofing and pull the communications). that’s actually all the areas of the apartment, where you can legally install a washing machine. Owners of small apartments are sometimes stumped by these restrictions. However, we found twenty-seven solutions for the interior problem. for any size and budget.
Under the countertopHow to place the washing machine in a small bathroom? The most predictable answer is to fit under the sink countertop. The prosaic nature of the approach does not make it any less functional: Here and the utilities are nearby, and space is used wisely. Particularly if the bathroom is large enough to accommodate a wide countertop and drawers next to the machine for everyday items.
Under the sink. and no secretsOpen countertop without a pedestal. a technique that hits the budget less. This makes it even easier to position the washer under the sink. To avoid hitting the door with your knees, you can move the appliance slightly to the right or to the left of its axis, as in the example in the photo.
Under the countertop at different levelsA countertop at the height of a standard washing machine is not always a convenient solution, especially if you’re short or if you have small children in the house. Way out. buy a smaller washing machine (but then also a smaller load) or design for the washing machine countertop a little higher than for the sink. On the resulting surface, you can store cosmetics or a laundry basket.
In a cabinet with a transparent frontIf your cat likes to meditate looking at the spinning drum, and you have a habit of forgetting to turn on the washing machine, a cabinet for the washing machine with closed fronts is not an option for you. An alternative would be an original door with a round cutout a la porthole: with such a pedestal it’s really easy to control the process of washing.
Next to the shower stallIf you’re ready to replace your bathtub with a shower stall, there’s probably still plenty of room for it even in the smallest bathroom. What more reason than to put a washing machine there?? And the more so because you can also fit a washer-dryer upstairs.
Use the wall heightIf you can place the washing machine in a small bathroom in a niche, use the full height to the maximum. You can, for example, install a narrow hanging cabinet above the washing machine for cleaning chemicals or towels.
An irregularly shaped countertop A device for a small bathroom by Russian designers: choose a model with a variable width, so that the countertop does not “eat up” the usable space. The wide part in our example covers the washing machine, the narrow part leaves plenty of room for movement. A great solution for those who don’t know where to put the washing machine in a small bathroom.
One levelCan the washing machine be lifted off the floor if it doesn’t reach the countertop level?? Yes, the main thing is to give your appliances a firm footing. If space allows, install a drawer under the machine. it will be useful for storing laundry that you have not yet had time to wash.
Behind closed doorsIf you’re a supporter of hidden appliances, provide for disguising the washing area with doors. An important detail: from time to time they have to be kept open, so that the drum of the washing machine was ventilated.
A practical tip for a small apartment: put a tall open cabinet with shelves in the bathroom. And in the lower section successfully fit a washing machine.
The niche under the blindsA blind cabinet leaves no room for airing, an open one. no secrets. Wooden blinds are a compromise: they are not airtight at all, they let air in very well, but they still hide the appliances.
For draperyTo hide the washer and dryer on a budget, you can use an ordinary curtain rod and a piece of textile that you like. If there’s fifteen centimetres of space between the appliance and the partition, then buy a pull-out shelf unit into this space.
For a roller blindAnother way to balance out a high niche is with a fine roller blind. To put a washing machine in the bathtub this way is to solve two problems at once: to save space, and to give a good view of the whole washing area.
In a combined bathroom. in two linesThe combined bathroom has many disadvantages, but the main advantage is the increased area. Most likely, the washing machine will also fit, and it is not necessary to “drive” it under the sink: you can organize the washing area opposite and complement the laconic countertop. People seldom do this, and for good reason. By the way, in our example in the photo the countertop also serves as an ironing board.
Lifehack for a hrushchevkaWhere to put the washing machine in a hrushchevka? Sometimes, making remodeling and combining the bathroom, the owners add to the wet area and part of the corridor. In the niche formed the washing machine fits perfectly, and it does not have to be placed on the floor. It is believed that the optimal height for the drum. at a distance of 80-100 cm from the floor: this configuration allows you to load laundry and detergent, without bending over too much.
To place the washing machine in a small bathroom, sometimes you have to learn new planes. Compact washing machines that hang on the wall. is not uncommon in the world of manufacturers, but many of us still treat them with apprehension. What if the wall does not hold up, or the machine vibrates and breaks tiles??
Mounting such a washer on a thin partition wall made of gypsum plasterboard is really not worth it, but in general, the technique is lightweight. almost any standard wall will do. If properly installed, the machine almost does not vibrate and is absolutely silent, although among the disadvantages can be called a small volume of the drum. about three against the usual six kilograms.
Behind the sliding panels Can the washing machine be placed in the toilet?. Why not, if the size of the room allows. Especially since the appliances can be inconspicuous. as in the example in the photo, where the washing machine is hidden behind sliding panels of teak veneer.