Juicer first nt 9214 how to disassemble

How to disassemble and reassemble the juicer?

Most malfunctions of this type of kitchen appliance, in one way or another, are related to the electric motor or moving parts, such as gears, clutches. If you have not done anything with the juicer from which it is guaranteed to fail (dropped, for example), it is possible that you can repair the damage yourself. But for this you will first have to carefully inspect the device from all sides to understand how to disassemble, and most importantly, how to assemble the juicer back.

Typical malfunctions

  • Wear of the plastic gears.
  • Heavy contamination.
  • Blown fuse (if any).
  • Failure of elements of control circuit.
  • Corrosion or short circuit of contacts.
  • Wear of motor parts.

If the juicer is many years old and the warranty has long expired, it may have served its useful life, calculated by its manufacturer (not for nothing). However, if the juicer is “foreign”, then its manufacturer probably did not even assume that his creation would be disassembled by someone and try to repair it after all these years of service!

But if the juicer was not physically damaged immediately before it malfunctioned, but suddenly stopped working, it can mean that over time it became dirty, some contacts oxidized because of moisture, wires burned out or something got shorted. Anything can happen, but the main thing is that nothing serious happened to her, and therefore you can count on a successful repair. After all, the very fact of long, uninterrupted operation speaks volumes about the reliability of the juicer. If it wasn’t reliable, it would have broken during the warranty period.

Tools

To disassemble the different types of juicers often do not need anything other than a set of screwdrivers of different types and sizes, because all of its parts are attached to the latches, locks, screws (sometimes used nuts).

And since we do not know the cause of the failure, we will not give here a list of possible tools and supplies that may be needed for repair. it may be too long. Just be prepared for anything.

Components of any juicer

  • lid;
  • plastic pusher;
  • the container for collecting the squeezed juice;
  • steel or plastic strainer;
  • the insert under the strainer;
  • container for collecting waste (cake);
  • motor unit.

Disassembly procedure: step by step instructions

Begin disassembling the juicer with the top part, the elements of which are either just tightly inserted into each other or held in place with the help of locks. That is, you need to detach from the juicer everything that can be removed without the help of tools, and will prevent us from further disassembly of the motor unit.

To get to the motor mounts and then take it out, turn the juicer over and unscrew the bottom screws with a screwdriver (there are usually 4 pieces of screws).). Then remove it and unscrew the screws securing the wiring blocks on the back side, so that you can completely free the bottom and put it aside.

Now remove the drive disc from the motor shaft, keeping the shaft from turning on the reverse side (if the disc is secured with a screw or nut). Or push it upwards if it is just clamped on the shaft without any other fasteners.

Remove the cover of the motor unit by unscrewing all the screws on the motor unit, disconnecting all the knobs and switches that are in the way and freeing the wires.

Unscrew the screws fixing the motor control board and remove it to the side.

After that there is nothing to prevent us from loosening the screws fixing the electric motor itself, of which there are usually 3 or 4, and then remove it.

To remove and inspect the rotor, remove all screws from the motor housing and disconnect the brushes and wires. Remove the rotor and inspect it for any visible damage. Check the condition of the bearings by twisting it several times with your fingers. If there is nothing wrong with the bearings, the rotor should rotate by inertia for a long time, and not stop immediately.

Inspect and service anything you can. Clean surfaces of dirt and dust with non-corrosive solutions, “test” all wires, motor winding and control board elements with an electrical tester.

Braze, clean, and replace anything that needs to be replaced. In general, do everything possible to troubleshoot possible problems so that disassembly of the engine block is not in vain.

Output

The design of fastening parts of the motor unit in the juicers of different manufacturers are always different, so the order of disassembly may be slightly different. You may even need additional tools for this (pliers, wrenches, tweezers, wire cutters, etc.).), but the general principles of construction are the same for all.

Knowing the internal structure of the device, you will easily be able to assemble the juicer with your own hands.

How to disassemble the juicer

Each juicer comes with instructions and assembly diagram. But if you have been using the device for several years, the instruction may have been lost. Even in this case it is not difficult to disassemble the device.

Carrying out repairs with your own hands, difficulties may arise only during the first disassembly

The main thing is not to overdo the efforts at disassembly. Otherwise there is a risk of damaging the body of the juicer.

To disassemble the juicer is possible in a few steps.

Как снять сетку с соковыжималки

  • Make sure that the power cord is unplugged.
  • Remove the food pusher from the feeder compartment.
  • Remove the lid, preliminarily disconnecting the fastener.
  • Then, from under the lid, remove the container that collects the squeezed products.
  • Take out the chopper.
  • Disconnect the jug intended for the juice.

After disassembling the body of the juicer, then it is necessary to remove the pulley. Usually, it is twisted from the shaft in the opposite direction from the working rotation.

To get to the juicer motor, which is located at the bottom, it is necessary:

  • Unscrew the screws that fasten the protective cover.
  • Remove the motor guard, if present.
  • Remove the motor mount and take it out of the juicer body.

There is an exception for auger juicers, which resemble a meat grinder.

To disassemble it is necessary:

  • Remove the nozzle.
  • Detach the receiver with auger from the main body.
  • Remove the auger.
  • The motor itself can also be accessed from the bottom.

How to Disassemble the Juicer

SC-018 SC-018 Scarlett Juicer Useful Information Power: 850 Watts Easy to use.

Juicer repair

The device juicer and motor replacement.

VITEK VT 1609 juicer

Juicer VITEK VT 1609 Before you buy this product online store www.marketshop.by look at it.

Juicer ! Lifehack ! Small but nice !

Juicer ! LIFEHACK ! Small thing, but nice ! Hello, my good people! My name is Lyubov, I am 58 years old.

How to disassemble a screw juicer (vertical) by example (NUC Galaxy)

You can buy this product at the best price with a guarantee here:.

HOW TO CLEAN A JUICER▶SUPER REMEDY▶TEFI GERMANY

In case you haven’t seen yet SUPER DESIGNER HANDS ❣ ❢ TRANSFER OLD WOMEN TO YOUR HANDS.

Review, repair, juicer SV 2, Crane

The story will focus on the juicer. How to disassemble and assemble. If you have any questions I will be glad to answer them.

Bosch juicer repair part 1 (disassembly)

This video has been processed in the YouTube Video Editor

Juicer repair

Simple juicer repair. The amazing thing is that it works!

Repair juicer with his own hands! Repair juicer with their hands!

How to repair the juicer with your own hands, the motor hums but does not spin! How to repair their own hands juicer, the.

juicer, first, 9214, disassemble

Philips HR 1832 juicer. Review. (6 months later).

Half a year has passed since I bought a Philips centrifugal juicer (Filips HR 1832) Equipment review, my opinion on the.

CBA Juicer

User’s disassembly-assembly of Soviet SBA juicer (Juice Squeezer Automatic, 1971).

Disassembling juicers (2 juicers)

This video shows disassembly of a common juicer, as well as juicer / blender.

How and what to clean the juicer. Pure Universe. NetUniverse.

Skype: artashkina24 HAPPY HOSPITALS here ▻. Website:.

JUICER REVIEW

Mystori juicer test drive Made in China.

Scarlett SC-012. Juicer review.

Juicer Scarlett SC-012. Unpacking and review.

Scarlett juicer repair

The problem is not complicated. I showed the principle of repair and inspection.

Juicer SVSP-102 Zhuravlnka

Juicer SVSP-102 “Zhuravlinka” Juicer SVSP-102 “Zhuravlinka” (TU16. 332015-86) centrifugal.

Resurrection of Zelmer juicer. Repair with my own hands.

Zelmer #juicer #repair Cooking Channel: I’m in.

Magnit juicer. How to disassemble and clean it

Review of the Magnit juicer Magnit. How to disassemble and clean it.

Juicer Scarlet SC-1014 stopped working.

This video shows the repair of juicer Scarlet SC-1014. as well as the main causes of its malfunction and how to.

Juicer how to disassemble

Assum is a fast-growing Russian company specializing in the production and sale of.

Philips juicer. Review, characteristics.

The video shows Philips juicer and its work on juicing. Subscribe to our channel here:.

HOW TO WASH AUGER JUICER

One of the most frequently asked questions: is the auger juicer easy to clean. Recorded the process of washing on video.

Repair of Scarlett juicer. Electronics Man’s Delirium.

Hi friends. Here is the first repair this year. They asked to repair the juicer. Said something shorted out and.

KITFORT KT-1102-1 / Making tasty juice / How to assemble the Juice Maker 01.04.2020

All videos HECTOR Recipes Cooking on Steam About Me.

Review of the juicer Scarlett SC-JE50S45

Scarlett SC-JE50S45 juicer SC-JE50S45 High-powered centrifugal juicer allows you to get your juices juicing without buying special device.

Ukraine: day 2 | fighting in Kiev, troops in Chernobyl, disruption of negotiations

Gordon. Appeal to Russians and the Ukrainian army

Russia’s invasion of Ukraine. Day 2 | live feed | 25.2.22

What is happening in Ukraine? The special operation continues

Watch new, popular videos online in good quality. Quick Search Any Video.

How to Disassemble the Juicer

Juicer Scarlett SC 018 SC-018 Juicer Useful Information Power: 850 Watts Easy to use.

Juicer repair

Juicer structure and motor replacement.

VITEK VT 1609 juicer

Juicer VITEK VT 1609 Before you buy this product online store www.marketshop.by taking a look at it.

Juicer ! Lifehack ! Small thing, but nice !

Juicer ! Lifehack ! A trifle but nice ! Hello, my good people! My name is Lubov, I’m 58 years old.

How to disassemble a screw juicer (vertical) by example (NUC Galaxy)

Buy this product for the best price with warranty here: http://madeindream.com/juicers/verticaljuicers/Galaxy-1303.html.

HOW TO CLEAN A JUICER▶SUPER REMEDY▶TEFI GERMANY

If you have not seen yet SUPER DESIGNER WOODS BY YOUR HANDS ❣ ❢ TRANSFORM THE OLD WOODS IN THE WAY.

Review, repair, juicer SV 2, Crane

The story will go about the juicer. How to disassemble and assemble. I will be glad to answer any questions you may have.

Bosch juicer repair part 1 (disassembly)

This video has been processed with the YouTube Video Editor (http://www.YouTube.com/editor)

Repair of juicers

A simple juicer repair. The most amazing thing is that everything works!

Repair of citrus juicer with his hands! Repair juicer with their hands!

How to repair your own hands juicer juicer, the engine buzzes but does not turn! How to repair their own hands juicer, the.

Philips HR 1832 juicer. Review. (6 months later).

Half a year has passed since I bought the Philips centrifugal juicer (Filips HR 1832) equipment review, my opinion on.

CBA juicer

User disassembly-assembly of Soviet Soviet SVA juicer (Juice Squeezer Automatic, 1971).

Disassembly of juicers (2 juicers)

This video shows the disassembly of a normal juicer, as well as juicer / blender.

How and how to clean juicer. Pure Universe. NetUniverse.

Skype: artashkina24 HAPPY HOSPITALS here ▻ http://netuniverse.info/partner/98923. Website: http://stopzaraza.ru/.

JUICER REVIEW

Mystori juicer test drive Made in china.

Scarlett SC-012. juicer review.

Juicer Scarlett SC-012. Unpacking and review.

Juicer Zhuravinka SVSP-303. Detailed review.

https://www.YouTube.com/watch?v=gwB8kh1_OOU massage to enhance male potency https://youtu.be/m5gvCMOj8YM.

Scarlett juicer repair

The problem is simple. I showed the principle of repair and inspection.

Juicer SVSP-102 ZHUVLNKA

Juicer SVSP-102 “ZHUVLINKA” Juicer SVSP-102 “ZHUVLINKA” (TU16. 332015-86) centrifugal.

Resurrection of a Zelmer juicer. Repair with your own hands.

Zelmer #juicer #repair Cooking channel: https://www.YouTube.com/channel/UCwODvzWrLRVll_547WKJMGQ I’m in.

Juicer Magnit. How to take it apart and clean it

Review of Magnit juicer Magnit. How to disassemble and clean it.

Juicer Scarlet SC-1014 stopped turning on.

This video shows the repair of the Scarlet SC-1014 juicer. as well as the main causes of its failure and how to.

Juicer how to disassemble

Assum is a fast-growing Russian company specializing in the production and sale of.

Philips juicer. Review, Specifications.

The video shows Philips juicer and its work on juice making. Subscribe to our channel here:.

HOW TO WASH AUGER JUICER

One of the most frequently asked questions: is the auger juicer easy to clean. Recorded the washing process on video.

Repair of Scarlett juicer. Electronics nonsense.

Friends Hello. Here comes the first repair this year. Asked to repair the juicer. They said something shorted out and.

Juicer. fast repair. chinese tricks.

Thank you for your Donate https://www.donationalerts.com/r/drazdofil.

juicer, first, 9214, disassemble

Restoring the manual juicer

Go to the main channel at https://www.YouTube.com/user/sergeyneverov.

KITFORT KT-1102-1 / Making Tasty Juice / How to Assemble a Juicer 01.04.2020

All HECTOR videos https://vk.cc/a2TZrZ Recipes https://vk.cc/a2TZYe Cooking on Steam https://vk.cc/apWDSW About yourself.

Scarlett SC-JE50S45 juicer review

Juicer Scarlett SC-JE50S45 High-powered centrifugal juicer SC-JE50S45 allows you to get.

Ukraine: second day | fighting in Kiev, troops in Chernobyl, disruption of negotiations

Gordon. Address to the Russians and the Ukrainian army

Russia’s invasion of Ukraine. Day 2 | live feed | 25.2.22

What is going on in Ukraine? The special operation is going on

Want to have a good time watching the video? On our video portal you will find videos for every taste, funny videos, animal videos, video broadcasting and much more

If the juicer does not turn on, do not rush to disassemble the device and take out all its insides. The cause may be very trivial, which can be determined through a thorough external examination of the appliance. The first place to look for the problem is the power supply. Make sure that the power supply has the required voltage and that the plug and socket are tightly connected to each other. The reason can be in a damaged mains cable, which can be replaced or repaired by rewiring.

If there are problems with the juicer’s operation, also check that it is correctly assembled and that there are no foreign objects in the drum. If no external causes are apparent, disassembly is necessary. Usually the root of the problem is in the failure of the motor parts, which you can buy in the online store of spare parts for household appliances Arlos.

Engine trouble

The most important organ of any electrical device is the motor. Two types of motors are used in juicers: collection and asynchronous. Collector-driven units are compact and lightweight, but inferior in performance to the more powerful asynchronous motor with greater mass.

To connect the motor to the auger or centrifugal drum there are various couplings and gears, made of plastic. They are most susceptible to wear and most often become the cause of failure of the device. Motor failure can be not only due to natural wear and tear of its elements, but also due to the following reasons:

  • power surges in the mains;
  • Constant overloading of the device;
  • ingress of moisture and foreign objects into the motor;
  • contamination of the bearings
  • improper operation and maintenance of the device.

After disassembly of the engine it is possible to determine the true cause of the failure. In the collector motors can wear brushes, which can be easily replaced with new ones. All rotating and rubbing parts of the assembly, such as glands, bearings, gears and other parts, should be inspected for damage, cleaned and lubricated. The motor may have a burned-out winding, which requires replacement of the entire assembly. Each particular juicer model has its own design features, but the causes of failure are usually the same.

Repair of juicers with their own hands

The basis of the juicer is a motor. Today they use asynchronous, collector electric motors. No wonder. the technique knows no other. Actually, the repair of juicers with their own hands often faces the situation of a failed motor. To replace the mechanical part is almost impossible, devices based on meat grinders, when hit by a bone break clutches, plastic bushings, hydraulic presses have a lot of trouble with the oil system. Consider the issues, don’t expect a detailed manual, but basic types of faults will be addressed sufficiently.

Juicers

Hello. I want to get the motor out of the body of the juicer Kenwood JE730, on the motor shaft on the outside of the body, the fastener for.

Where to buy juicer grates more than 3 months ago Neptune juicers

Hello. I want to buy in stock two metal grates; round bottom and side cone-shaped, for second-hand.

Smoke came out of the juicer more than 6 months ago Bork S700 Juicer (JU CUP 23130 SI)

Hello everyone. Smoke and smell of burning from the juicer Bork S700 (JU CUP 23130 SI), what to do?

Juicer does not turn on kitfort more than 6 months ago KITFORT KT-1104 juicer

Hello. We turn on the juicer KITFORT KT-1104-2 after the winter, and it does not work. Stored at home in a dry box.

Juicer leaking why more than 6 months ago KITFORT KT-1101-3 juicer

Afternoon. From under the cup of the juicer KITFORT KT-1101-3 juice leaks on the motor housing, it can be seen after disassembly, also the juice is.

Moulinex juicer part more than 6 months ago Moulinex Juicer PC 60003 E

Afternoon! We lost a cone from a Moulinex PC60003E citrus juicer. Part number SS-192534. Not available at the moment. But it can.

Juicer does not turn on the cause more than 6 months ago Juicers Scarlett SC-012 (2011)

Good evening. Juicer Scarlett SC-012 (2011) does not turn on, but it worked fine for a month. Then within two months does not.

Juicer does not squeeze juice for over a year Scarlett SL-JE51S01 juicer

Hello. The Scarlett SL-JE51S01 centrifugal juicer stopped while juicing and no longer works. There was no smell of burning.

Juicer does not turn on more than a year ago Vitesse VS-553 juicer

Good afternoon. Yesterday, bought a juicer Vitesse VS-553, put everything together according to the instructions, but it does not turn on, what to do?

Juicer began to squeeze poorly more than a year ago Bork S511 Juicer (JU CUP 21095 SI)

Good afternoon. Used to have quite a lot of juice from the Bork S511 juicer (JU CUP 21095 SI), but now 2-3 times less and a lot is left in the waste.

Problems with juicer more than a year ago Angel Juicer Angelia 5000 (5500)

Good day. Angel Juicer Angelia 5500 juicer spins backwards, start/reverse/stop buttons on the side panel stopped.

Problem with juicer more than a year ago Bork S801 Juicers

Good day. No way removable juice bowl from the juicer Bork S801, please advise how to do this?

I need a cap on a vitesse juicer more than a year ago Vitesse VS-200 juicer

Hello! I need a cap on my Vitesse VS-200 juicer. Please tell me where you have one of these in stock?

Can not remove the top head of the juicer more than a year ago Bork S400 Juicer (JU CUP 22090 SI)

Hello. I want to dismantle the juicer Bork S400 for the reason of jamming the motor. Bad rotation, but I can not remove.

Panasonic MJ-W171P juicer does not turn on over a year ago

Hello. Panasonic MJ-W171P juicer does not turn on, but the buttons work, there is voltage on the motor and the brushes are fine. What’s up?

Changing the grinder in the juicer more than a year ago Moulinex JU 5001 Juice Machine

Good evening. There is a standard grater basket in the Moulinex JU 5001 Juice Machine, can it be replaced with another grater basket, with.

Juicer stopped working more than a year ago Moulinex Juicers JU-570887

Hello. Moulinex juicer JU-570887 while juicing carrots and apples suddenly stopped working, what could be the problem.

I need a container for juice and cake more than a year ago Sterling England ST-3541 juicer

Good afternoon. Need juice and cake container for Sterling England ST-3541 juicer, where to buy or order?

How to remove the grid from the juicer more than a year ago Atlanta ATH-311 juicers

Hello. We can not remove the strainer. Please tell me how to remove the mesh from an Atlanta ATH-311 juicer? Thank you very much.

Oursson JM6001 juicer doesn’t push the cake out more than a year ago

Good afternoon, professionals. Oursson JM6001 juicer stopped pushing out the cake, at first it partially, and now it doesn’t push out the cake at all. В.

First nt 9214 juicer how to disassemble

Another video lesson. This time I’m talking about 1971 soviet juicer. I show you how to take it apart and put it back together. I demonstrate how to squeeze apple juice:

Adorable! Looking forward to the next videos. Everything is fine, only the juicing process is somewhat delayed. And otherwise, all the laws of the genre are satisfied)

So. watched the video lesson, I would like to express the pros and cons.

Unusual and unexpected for me that you decided to try yourself in the field of video blogging. In the future it can be used as a passive source of income (this is me looking completely ahead)

Well chosen setting and your outfit. All so cozy, homemade.

Great emotional transfer when sampling the juice. Well, in general, the whole process of absorbing it just fine!

The beginning of the video goes like a review. you disassemble the juicer, not bad to mention the number of parts that need to be washed after use.

Interesting the number and variety of apples taken to make the juice-it would have made the video a little more satisfying. Would have made it less technical.

Purely for the quality and style of the picture is better to use a glass under the juice, instead of a cup, it will look much more impressive in the video (even on the advertising judge).

I do not know the variety of apples, the number can be seen in the basin, but exactly how many apples. I do not know, my mother cut, and she did not count.

The number of parts to wash. so they all need to wash, I showed them all on purpose. Although, of course, I should have mentioned it.

Well, if on efficiency-then of course modern squeezers, in which you can shove a whole fruit or half of it, and at the end of the process to wash the squeezer with water.much more convenient and time-saving. But, since you have time and you do not wash dishes, in principle, you can have fun with micro slices of apples.

And the machine of the 70’s my respect and applause!

Well, Maxim! Respect and respect to you. Found this juicer at the cottage, no instructions, but to try to work or not wanted to. Stumbled upon your video and oh, my goodness! It works, and how! Once again, thank you very much! She’ll be around for a while.

Key features of the Braun 4290 juicer

Country EU
Manufacturer’s warranty 2 years
GENERAL:
Type Centrifugal
COUNTER:
Tank capacity 0.5 liter
DRINKING MACHINE:
Tank volume 1.2 liters
Removable reservoir
CONTROL:
Type of control Mechanical
Number of speeds 1 speed
POWER:
Max. power input 600W
Max. centrifuge rotation speed 9000 rpm
SAFETY:
Overheat protection
BODY:
Case Material Plastic
Rubberized feet yes
Cord compartment
Cord length 1.5 meters
COMPLIANCE
Pusher
Juice tank
DIMENSIONS
Height 27 cm
Depth 24 cm
Width 19 cm
Weight 2.45 kg
Color white
| Denial of responsibility | Contacts |RSS