Plug for cleaning the ash pan of a gas boiler

Ash plug BEF. BEF

Almost all products are in stock. Goods delivery from warehouse to the pickup point may take 1-3 working days.

Delivery to Nizhny Novgorod

Average delivery within the city. 800.

Delivery is made after prepayment or full payment of the order, as convenient.

Attention! Unloading is performed by the customer and is not included in the delivery cost!

Shipment by TK

Also we deliver orders within Russia by means of transport companies (usually by Delovymi lines or PEC).

Sending TK is after full payment for the order (without cost of delivery TK).

Pickup from the warehouse by your transport company. The service is paid. 600р.

The rest of the cost of transportation, check with the TK, which will bring your goods.

  • In front of the front panel of the gas-fired water heater there must be 60 cm reserve;
  • Distance from the water heater to the gas stove. at least 20 cm;
  • A shutoff valve is installed before installing the heater.

Extractor and speaker in a private home

2.1 The stages of installation (tips of the master)

  • If you’ve decided to disguise your gas water heater in a cabinet bogie. it’s possible. But you should be aware that such a cabinet should not have a bottom, and the side walls should have high-quality insulation;
  • If you are hesitant to choose between installing a pipe for the chimney, opt for a corrugated multi-layer aluminum. Such a pipe is great for a private home, as it is easy to install, quite reliable and inexpensive, and inside has steel pipes that prevent sagging;
  • If you are planning to install a gas boiler instead of the old one, which came into disrepair, it is best not to change the place of installation. This way you will save time and part of the money;
  • Remember that if you unauthorized tapping into the gas pipeline and connecting a gas water heater, you face administrative responsibility in the form of a fine.

How to clean a gas water heater at home

Our tap water is rich in various chemical compounds. Passing through the coil of the gas column, it releases a sediment that covers the inner walls of the tubes. Over the years of operation the layer of limescale is able to overlap the passage section by half. The method of counteraction is one. timely cleaning, flushing the heat exchanger. Let’s look at several available ways to clean the gas water heater at home, choose the appropriate one and maintain the water heater with your own hands.

plug, cleaning, boiler

Gas water heater. the principle of operation, the causes of fouling

The flow-through gas water heater is essentially a heat exchange device. Its main element is a special pipe circuit. Water flows through it and is heated by the open external flame of the gas burner. Modern models are turned on automatically. as soon as the mixer valve is opened, ignition occurs and heat energy is transferred to the walls of the circuit, and from them to the flow. As a result, at the output the user gets hot water.

Despite the simplicity of the design and scheme of action, in the work of such a device is constantly formed harmful interfering factors. first of all, these are:

How To Clean A Pellet Stove And Save Money

  • Fouling. on the outer walls of the heat exchange circuit. Deteriorates heat transfer from the burner to the water, reduces efficiency, leading to excessive fuel consumption.
  • Scale. builds up on the internal walls of the heat exchanger. Forms as a result of decomposition of dissolved salts in water and solid insoluble sediment. Reduces flow, reduces pressure, degrades performance.
  • Soot. Solid products of gas combustion inevitably settle on the burner and the igniter itself. Flame goes out intermittently, intensity of combustion decreases, performance declines, and there is a risk of gas leakage.

In addition, depending on the water quality, other impurities such as rust, sludge, sand, etc. may be deposited in the heater. To eliminate their impact, you need a periodic and timely competent cleaning of the gas heater.

Clean the water inlet assembly

At the inlet of the system that conducts water to the speaker, there is a water inlet assembly. The steps of cleaning this part:

  • Pull the assembly out of the heater housing.
  • Unscrew the connection screws, open the housing.
  • Clean filter, rinse with clean water.
  • Check the diaphragm, which should be flat. If there is a bend, it means that the membrane should be replaced, as its resource is exhausted.
  • Close the lid of the unit, “tighten” the bolts and tighten them alternately in opposite pairs to provide equal tension of the diaphragm.
  • The mesh membrane is often clogged with large particles of sediment and rust, so it needs regular cleaning. Factory filter installed on the heater can be replaced with a modern silicone filter, which has a much longer service life.

Gas flange for gas columns

as of today, : Shop/office:m. Black River: much Warehouse: much Delivery: muchMaterial: steel, thickness 0.6mm Coating: white heat-resistant enamel Size 190190mm.

Gas flange is installed on the hole in the ventilation shaft and is designed to connect the chimney of the gas column. It is also used for organization of clearing (ash-pit) jointly with the stub.

Ash pan hatch 110mm gas

Stopping plug and mounting flange for installation in the hole of clearing

  • Calculation of the cost and delivery time of the goods is made in real time on the ordering page.
  • The calculation is based on the weight of the goods and the destination.
  • Deliver orders to any place in Russia, Belarus and Kazakhstan.

#xE32A; Warranty on goods The warranty on all items purchased in our online store is 12 months

#xE324; SMS alerts You receive an SMS at every stage of your order.

#xE889; Returns and exchanges. No problem You can return your purchased items within 7 days. Merchandise must be in normal condition and have all factory packaging.”Returns & Exchanges. no problem!

#xE870; Payment Methods You can pay for your purchases in any way you like: in cash, by cashless bank transfer or by credit card right at the moment of order.

#xE90E; Best price We are proud of our prices, they are checked every day by hundreds of customers who give their choice to our online. store!

Please log in to your account to contact the seller

End cap and mounting flange for installation in the cleaning hole.

plug, cleaning, boiler

Set designed for installation into the vent hole of the gas boiler/gas water heater.Hole diameter flange / plug diameter: 110mmMounting diameter flange: 116mm.Flange overall size: 190h190mmDepth flange spigot seating: 50mm (if necessary, can be shortened with a hacksaw for metal or angle grinder) Mounting the flange is carried out on a silicone sealant.Coating: white high quality heat-resistant enamel.Material: steel.

Equipment: Mounting flange 110mm white.1pc, blank cap 110mm white.1 pc.

Types of flues for gas columns

Sorting:DefaultName (A Ya)Name (Ya A)Price (low high high)Price (high low)Rating (starting high)Rating (starting low)Model (A-Ya)Model (Ya A)

Gas water heater is a fairly simple and practical way to provide hot water to any home or commercial facility. Of course, provided that the object is connected to the gas supply system.

This device is an ordinary flow-through water heater that solves the problem of hot water supply in gasified facilities (both residential and industrial use), not connected to the centralized DHW system. Boilers differ in power, ignition type, method of chimney flue and other parameters.

When using a ceramic chimney, you should be aware that ceramics has a high percentage of moisture absorption. To increase its service life it is necessary to make additional exhaust ducts.

plug, cleaning, boiler

When installing the extraction system, the ceramic pipe is wrapped in insulation and installed in a keramzite or brick box.

It should be noted that this method of flue gas removal is expensive. And it is not suitable for a gas water heater, located in an apartment.

Ventilation diffuser: types and features

| Denial of responsibility | Contacts |RSS