Salt filter for washing machines installation

How to choose a filter for your washing machine?

Poor-quality water from the water supply in fact on the whole territory of the Russian Federation is the worst enemy of washing machines. large amount of magnesium and calcium salts in it, as well as other mechanical inclusions (rust, sand) promotes clogging of internal elements and formation of lime scale on the main mechanisms of automatic washing machines. To prevent premature wear and tear of equipment, to eliminate the problem requires timely. There is quite a sensible question: how to soften water and how to purify it? In this case, the use of a specialized household filter for water softening in the washing machine will be an indispensable option for the cleaning device.

How will water softening affect the washing process

After installing a special filter for water softening, you will be able to see for yourself the correctness of your decision. Its installation is associated with a number of important benefits:

  • Saving powder, fabric conditioner and other detergents.
  • Extending the life of the washing machine.
  • Improve fabric whitening by 30-160%.
  • Quickly eliminating problematic coffee, chocolate, and berry stains, even when washing at 30-40 degrees.
  • Preservation of fabric integrity, no pulling or stretching effect.
  • Reduced electricity costs.

An overview of the best models of filters for washing machines, how to choose and install

A common cause of washing machine malfunction is considered to be bad water. This tap liquid often contains rust and finely dispersed dirt. All this leads to clogging of the main channels in the washing machine, as well as the formation of scale and other harmful compositions on the moving elements. This results in breakdowns and expensive repairs. Filters for washing machines will eliminate this problem.

Such modules are used only for technical purposes (laundry washing, dishwashing), because a substance is dissolved in the water, making it impossible to use it for drinking. Granules of sodium polyphosphate are placed in the bulb. As they pass through the water, they gradually dissolve and form complexes with salts of hardness and rust, making them water-soluble. In addition, a film is formed on the metal surfaces, preventing scale deposition.

See also  How to fill the salt in the dishwasher Bosch

With a sufficient amount of softeners in the detergent polyphosphate filter is not necessary, although in very hard water, it will always be useful in terms of reducing detergent consumption.

The system is installed after the faucet in front of the machine, and all incoming water passes through it. Maintenance consists of periodically adding reagent to the flask, which is easy to do yourself.

ion exchange, sorption and magnetic filters are also suitable for softening, the last two being suitable for drinking water.

Polyphosphate mixture dosage and filling frequency

When replacing polyphosphates yourself, you need to know how much filler to put in the flask, how long it lasts. The correct dosage ensures that the salt filters work effectively, does not cause harm to health. Dose and frequency in grams per 1000 liters:

  • prevents corrosion;
  • neutralization of potassium and magnesium;
  • eliminating excess chlorine;
  • no limescale is formed;
  • elimination of deposits on heating and other electric elements.

On the last point, 5 grams is the right amount to effectively combat the crystalline compounds of magnesium and calcium salts. The frequency of filling the filler depends on the size of the flask, the frequency of use of the water supply or appliances on which the salt filter is installed.

Prevention and cleaning of the elements of the washing machine

Citric acid is the ideal limescale preventative:

  • Take 60g of acid per 4kg of laundry;
  • Pour the citric acid into the powder container;
  • Switch on the mode with a temperature of 60 °C;
  • Frequency of treatment once every three months. So there’s no more limescale buildup on the machine at all.

Owners of washing machines have a wide range of means for softening water. from single-use to system. The damage caused by calcium and magnesium salts is too serious to ignore. Things get ruined, appliances wear out and money is wasted. Softeners will improve your laundry and prolong the life of your household helper.

Influence of untreated water on the washing machine parts

They say that the washing machine can function without any filters for many years. But in today’s reality this is far from the case. This is caused by various impurities that contaminate the water. How they can be?

salt, filter, washing, machines

Mechanical impurities (dirt, sand, small debris), if not removed, can over time significantly clog the internal cleaner. The pressure needed to start the water will gradually drop, which can provoke a breakdown of the pump, and the device will stop drawing water.

See also  How to put the dishes in the dishwasher correctly

Rust is detrimental to the result of washing, because things fade, get new stains or do not wash at all.

salt, filter, washing, machines

If the water filter in the washing machine is not cleaned in a timely manner, the cleaner will clog. And this can cause damage to the machine

Hard water is no less dangerous. Mineral deposits from water settle on the heating element and the walls of the machine in the form of impenetrable scale. And this can provoke an increase in energy consumption for heating the water to the required temperature.

Limescale must be removed in good time. otherwise you could have a more serious breakdown, leading to more costly repairs. The washer requires periodic use of an antiscale agent to maintain the washer.

In addition, hard water provokes the appearance of corrosion. it is the key reason for the rapid deterioration of important parts and reduce the life of the machine.

Also untreated water is often the decisive factor in the depressurization of the machine due to the reduced elasticity of the rubber seals.

Situations indicating that a clogged filter needs to be cleaned:

  • after a wash or rinse, the process of draining water is unrealistically slow;
  • the machine completes the washing cycle and does not continue even after resetting the processor;
  • a fault code flashes on the monitor, the direct cause of which may be unclean water;
  • Spin or rinse modes do not start.

If such malfunctions are frequent, you should think about the quality of water filtration.

Waterscience IRIS WMF-617 Washing Machine Filter Review

Purpose

It is important to keep in mind that each disassembled type solves a certain list of tasks and has its own purpose. It is difficult to answer the question of which device is better, and which should be abandoned. There is no universal answer, it all depends on the conditions and characteristics of a particular situation. It is a common misconception that the equipment in principle does not need an additional fine water filter for washing machines, because it initially has a mesh cleaner. However, in reality it is not enough, it does not cope with the tasks.

See also  LG thinq washing machine with dryer

If you live in a region where the water supply is contaminated liquid, the mesh in a short time is clogged with inclusions and rust. As a result, the supply flow is reduced or may stop altogether, because the sediment collection tank is completely full. Having found a malfunction, as a rule, we call the master. One moves the machine away, unfolds it, removes the mesh filter, rinses it, releases the tank and the performance is restored.

Installing an additional cleaner effectively solves this problem and eliminates the need for constant calls for service. By installing this unit separately, it will be enough to shut off the supply, remove the sieve or the entire cleaner, remove and clean the membrane if necessary. A significant plus. the device has a large capacity for collecting debris, which means that you need to clean it much less often.

The influence of untreated water on parts of the washing machine

Without filtration, the impact on heating elements (heating elements), pumps, valves of household appliances, fed from the central water system, is critical, they quickly fail. Detergent consumption increases, but it is impossible to achieve high quality washing and rinsing. Filter for a washing machine in bad water cleans rust and other mechanical and abrasive particles, produces softening, which reduces the aggressiveness of the impact of the working liquid on the mechanical components of the washing machine.

The use of filtration in a home water system will increase the life of consumer appliances, reducing repair costs. In some cases, the lack of water treatment leads to breakdowns, which is not economically viable to fix, will require complete replacement of prematurely failed units.

| Denial of responsibility | Contacts |RSS