Split system installation accessories

Consumables for the installation of split systems

Flexible polyethylene foam heat insulation tubes are designed to insulate copper pipes in air conditioning systems.

  • Model: Tilit Black Star
  • Inner diameter of insulation: 6 mm
  • Diameter in inches: 1/4 “
  • Insulation thickness: 6 mm
  • Whiplength: 2 m

Flexible polyethylene foam heat insulation tubing designed to insulate copper piping in air conditioning systems.

  • Model: Tilith Black Star
  • Inner diameter of insulation: 10 mm
  • Diameter in inches: 3/8 “
  • Insulation thickness: 6 mm
  • Whiplash length: 2m

Flexible polyethylene foam heat insulation tubing designed to insulate copper piping in air conditioning systems.

  • Model: Tilit Black Star
  • Inner diameter of insulation: 12 mm
  • Diameter in inches: 1/2 “
  • Thickness of insulation: 6 mm
  • Whiplash length: 2 m
split, system, installation, accessories

Flexible polyethylene foam insulation tubing designed to insulate copper piping in air conditioning systems.

  • Model: Tilit Black Star
  • Inner diameter of insulation: 15 mm
  • Diameter in inches: 5/8 “
  • Insulation thickness: 6 mm
  • Whip length: 2m

Flexible thermal insulation tubes of polyethylene foam are designed for thermal insulation of copper pipes in air conditioning systems.

  • Model: Tilith Black Star
  • Insulation inside diameter: 18 mm
  • Diameter in inches: 3/4 “
  • Insulation thickness: 6 mm
  • Length of whip: 2 m

Bracket 450x450x2 mm for outdoor unit of air conditioner. Brackets are powder-coated, they are reliably protected against corrosion.

Bracket 450x500x2 mm for outdoor unit. Brackets are powder-coated, they are reliably protected against corrosion.

Bracket 500x600x2 mm for outdoor unit. Brackets are powder-coated, they are reliably protected against corrosion.

HEPA filter for HITACHI SENDO R32 series air conditioners / split systems (2 pieces in package).

Air conditioner drainage tube heater ND-5,5. One of the 3 split system winter start-up devices or “winter kit” that can be installed as an addition to your split system for normal operation in low temperatures. Designed to heat the drain pipe in sub-zero temperatures (winter season), prevents the formation of ice jams and contributes to the normal operation of the air conditioner.

  • Power supply voltage: 220V
  • Maximum power consumption: 1.5 to 60W
  • Operating temperature range:.40.70°С
  • Length: 0.3; 0.5; 0.7; 1.0 m

The crankcase heater is designed to solve the problem of cold compressor start. Prevents it from damaging. Prevents refrigerant from leaking into crankcase. Oil does not congeal and boiling of the refrigerant does not occur when the compressor is started.

  • Heating cable length: 0.5 m
  • Power cable length: 0.9m
  • Diameter of heated enclosures: 110. 320 mm
  • Operating temperature range:.40.70 °С

Unique development that uses wasabi-modified Nano Titanium catalyst to achieve a powerful effect of protection against bacteria, mold, allergens and extraneous odors. Nano Titanium Wasabi filter suitable for Performance, Akebono, Premium series, indoor unit kit, 2 pieces.

For your convenience, our site uses cookies.

Our site uses cookies and similar technologies to ensure the best user experience by providing personalized information, remembering marketing and product preferences, and helping you get the right information. By using this site, you consent to the use of cookies in accordance with this notice regarding this type of cookies. If you do not agree to our use of this type of file, you should set your browser settings accordingly or not use the site

Our site uses cookies for your convenience.

Our website uses cookies and similar technologies to ensure the best user experience by providing personalized information, remembering marketing and product preferences, and helping you get the right information. By using this site, you consent to the use of cookies in accordance with this notice with respect to this file type. If you do not agree to our use of this type of file, you must set your browser settings accordingly or not use the site

Flared Air Conditioner Mounting Kit.

Installation kit is a universal assistant in the process of installation of cooling systems and other air-conditioning equipment.

All components comply with established quality and safety standards.

Copper-based pipes are suitable for the installation of any air conditioning system (domestic and industrial), as well as other devices designed for cooling. The homogeneous structure of copper means that the mechanical characteristics are preserved during installation. The tube is completely smooth on the outside, which is due to a special treatment. The inner casing interacts freely with the fluids used inside the system.

See also  The split system does not blow with cold air

Full control is carried out in the process of production of components, which guarantees high quality of the product and excludes appearance of defects.

All you need to do is to fix the air conditioner units and make the connection to the electric network.

Important! To save on installation, you can use a special prefabricated line for the air conditioner. It makes the work much easier and allows to connect the inside and outside blocks of the air conditioner without any problems.

You can order flared mounting kits in any quantity. Formed set facilitates the process of installation of the split system and completely eliminates the need to carry out the copper pipe flare. For the novice installer. it is an ideal way to perform the work in short time with high level of quality. Mounting kits are convenient, practical and economical.

How to Install a Mini Aqua Mini-Split Condensate Pump in a Wall Mounted Mini-Split Unit

Flared Air Conditioner Mounting Kit.

Mounting kit is a one-stop shop for installing cooling systems and other air-conditioning equipment.

All components comply with established quality and safety standards.

Copper-based pipes are suitable for all air conditioning systems (domestic and industrial), as well as other devices designed for cooling. The homogeneous copper structure means that the mechanical characteristics during installation are maintained. The tube is completely smooth on the outside due to a special finish. The inner sheath is free to interact with the fluids used inside the system.

Full inspections of the production process of components ensure the high quality of the products and exclude defects.

All one needs to do is to fix conditioner units and make connection to electric network.

Important! To save on installation, you can use a special prefabricated air conditioner line. It makes the work much easier and allows to connect indoor and outdoor unit of air conditioner without any problems.

You can order flared mounting kits in any quantity. Formed set facilitates the process of installation of the split system and completely eliminates the need to carry out the flared copper pipes. For the novice installer, this is the perfect way to get the job done in a short time with a high level of quality. Mounting kits are convenient, practical and economical.

Air conditioning installation kits

Inter-unit installation kit for the installation of air conditioners up to 5 kW. Suitable for 07, 09, 12 models of all brands of air conditioners. The basic kit includes:. Copper pipe 1/4″ ASTM B-280 (6.35 x 0.76mm) in Energoflex insulation, nuts on, pipe rapped.

Mounting kit for air conditioner, 1/4″ and 3/8″. 2 m

Kit Ballu “Snowbird” winter to.40 ° C, for the air conditioner

Adapter designed windstop wsr l300 for use on pivot windows up to 2 meters high and mobile air conditioners with a duct diameter of 80-160 mm. features and benefits: Noise and heat insulation parameters of the adapter.

Accessory for air conditioners Windstop WSR L300

This kit is designed for installation of air conditioners with power from 3,5 kw. supplies and accessories presented in this kit are as follows: bracket 450×500, 1 pc copper pipe 1/4, 5 m copper pipe 1,2, 5 m thermal insulation 1/4, 6 m thermal insulation 1/.

Sinbo mounting kit for air conditioners from 3,5 kW

Bracket for air conditioner 500 (set) 103302

Complete set for independent installation of air conditioner 5 meters (copper)

Self-Installation Kit for Air Conditioner 3 Meters (Copper)

Type: connection kit, purpose: for outdoor unit of air conditioner, for indoor unit of air conditioner, set

Pipe set for air conditioner installation 2 meter

Pre-assembled tubes for self-installation of the air conditioner/split system. Ready-made tubes in thermal insulation with flared ends for tight connection of air conditioner blocks. Fits air conditioners with 1/4 and 3/8 connection sizes (07.09 Models; 7000BTU.

Prefabricated air conditioner pipe set 13 meters

Prefabricated air conditioning pipe set 8m

Prefabricated pipe set for air conditioner installation 11m

Prefabricated Air Conditioner Pipe Set 9m

HVAC TOOLS. ||AIRCONDITIONING TOOLS. ||SPLIT AC TOOLS.

VALUE VTB-5B-II air conditioner installation tool kit

Windstop wsr is a mounting kit which is necessary for installing a mobile air conditioner. this kit contains all the necessary components for routing the air duct out a window to remove the warm air from the appliance efficiently outside the room. mouth.

Type: connection kit, purpose: for outdoor unit of air conditioner, for indoor unit of air conditioner, set

Air conditioner installation pipe set 7 meters

Prefabricated air conditioner installation kit 13 meters, air conditioner line, air conditioner tubes, air conditioner kit

See also  How to put glassware in the oven

This is the most popular set for installing air conditioners, which includes all the basic components. The VALUE VTB-5A kit includes:. Manometric manifold with hoses. Under R410a. (as in VMG-2-R410A kit);. Value vacuum pump ( no weaker than 47L/min) oil;. Tru.

VALUE VTB-5A air conditioner installation tool kit

Aeronik HK1 winter kit for outdoor unit

Air conditioner installation kit, 1/4″ and 1/2″. 2 meters

Type of air conditioner: wall mounted split system, Capacity of air conditioner (BTU): 7, operation mode: cooling / heating, additional modes: dehumidification, night, ventilation, energy class: A, features: remote control, airflow direction adjustment, display, timer.

Shield for wall conditioner Ballu Split 900

Mounting kit for air conditioner 10 meters, air conditioner line, air conditioner pipes, air conditioner kit

Fischer Air Conditioner Mounting Kit 182.221.001

Complete set of O-rings for connection of air conditioner radiator (universal)., 16 pcs.) LUZAR

Many people use air conditioners only in summer, depriving themselves of an opportunity to use them as heating equipment in winter. And most modern models are able to produce not only cold, but also heat. With their help it is very easy to achieve.

Mounting kit for air conditioner, 1/4 “and 3/8”. 5 meters

Kit for installing air conditioner 14m, air conditioner ducts, tubes for air conditioner, kit for air conditioner

Brackets for air conditioners. All for air conditioners, AIRCUL Company

AIRCUL. is a direct supplier of brackets, canopies. protective grids and stands for air conditioners. Bracket is powder painted white, as well there is a different range of colors painted at your request. Brackets of different sizes to withstand different loads. There are reinforced types of metal structures of 3 mm. sheet metal. This type of steel structures is available on request. Brackets for the air conditioner are intended for fastening the external block of the air conditioner to the facade of the wall. Supports for the air conditioner, installed on a hard surface, the roof of the house. Steel constructions are made of high-strength sheet metal and powder painted in a standard color: white. Our company sells cheap brackets and metal structures at affordable as, and in the nearby suburbs. In other regions of Russia we deliver by transport companies.

So, you finally bought an air conditioner and decided to say goodbye to the hated heat forever. You have ordered for the installation of “climate miracle” specialists and entrusted the installation into the hands of professionals. But it turns out that it is not enough.Additional steelwork is required for the installation of the air conditioner. On their quality and the right choice also depends the long term operation of the air conditioner. We do not want the outdoor unit to be suddenly in a broken condition on the ground or it will be spoiled by vandals. Let’s consider what you should have and what characteristics you should pay attention to while choosing metal structures for professional air conditioner installation so it will not have any chances for unpleasant surprises.

So, an air conditioner installation consists of five main steps:

Planning. Preparing the territory for installing air conditioner, the choice of location, analysis of side effects and methods to prevent them.

split, system, installation, accessories

Interior installation. Everything that is connected with the installation of indoor air conditioner unit.

Connection holes. Installation of drainage system and connections between blocks.

External mounting. Installing the external block of air conditioner.

Connection works. Final forming of the whole system. All connections, vacuumization (evacuation of air from connecting pipes), connection of electrical parts.

After all procedures installers will run and test the system and give you a guarantee for their work. It is for the sake of this “important” paper and still it is worth to give preference to professional installation rather than trying to save money and install it yourself.Outdoor installation is the most “interesting” for the use of metal structures. It is from the street side that conditioner needs the most strong and reliable connections and metal “accessories.

We will get acquainted with the basic metal structures for installation step by step. First stage. exterior unit fasteners. In this case the basis for the external block of the air conditioner, and its weight in average varies from 27 to 140 kg, and sometimes they can be heavier, become brackets for air conditioners. They must have as much proven stiffness and reliability as the metal industry can provide. But the fact that the brackets belong to the factory production is not a 100% guarantee, there are a few additional characteristics that you should pay attention to when choosing brackets for air conditioners.

See also  What to do if the gas boiler shuts off

The bracket should be painted with powder coat paint, not enamel. Enamel coating very quickly comes in disrepair under the influence of external natural factors.

The holes in the brackets must be made before painting. When drilling holes just before installation, they will remain unprotected, and therefore more susceptible to rust.

Bracket dimensions should be strictly according to the size and weight of the air conditioner. For more light domestic conditioners brackets 450x450mm or 450x500mm are suitable, for larger representatives brackets with 1000x700mm or 1200x1000mm stop are needed.

After taking into account all these details and installing brackets, lets hang directly outdoor unit of air-conditioner. The second step is to install the anti-vandal grille. Expensive element such as compressor is a part of outdoor air conditioner unit. It can be a welcome detail for some not quite “brought up” companies installing air conditioners. Can be accidentally damaged by mechanical impacts. The cost of compressor is sometimes equal to the cost of air conditioner, so it is better to protect the outdoor unit with anti-vandal grill for air conditioners.

It is a protective, collapsible structure located on all sides of the air conditioner. The basic sizes of vandal-proof grids are 800x600x500mm; 1000x600x500mm; 1000x800x500mm; 1200x1000x700mm. But bars can also be made to individual dimensions. They are most often made of steel bar painted with powder coating. installation is performed using special fastening systems, preventing twisting of the construction. The main requirement is the presence of an opening sash for customer service staff access. It is possible to install designer versions of anti-vandal grilles for air conditioners. They can be forged in the style of some ornament and be an additional architectural element.

The third stage. the protective roof. You should not refuse this additional protection. It can protect the external unit from precipitation, from ingress of unnecessary moisture. But this design is especially useful in moments of seasonal thawing and mass collapse of icicles from the eaves. Also in winter, moisture that collects on the base and inside the outdoor unit of an air conditioner can freeze and cause damage to internal parts and fans. Visors for air conditioners are a construction of sheet metal and mounting brackets. Angles form a supporting structure on which is mounted sheet size 800h550mm, 900h550mm or 1000h550mm. The air conditioning canopy is attached to the wall with anchors. Can be combined with vandal-proof grid.

What you need for installation?

Among the most popular parts, of course. copper pipe. As a rule, most often buy a model with a diameter of ¼ or 3/8 inches, with special plastic annealed, which easily take the desired shape, easy to roll, can be connected by fittings or by soldering. Sold in coils, each coil contains from 15 meters.

One more important detail is a thermal insulation, which is put over the pipe to protect it from cold or overheat. It is better to buy a modern one, made of foam material. Consult with the manager of the online store about the thickness of insulation to buy in your particular case.

split, system, installation, accessories

Of course you will need the electric cable. It can be three- or five-core, and the choice depends on the type of air conditioner. In the instruction to climatic equipment there is usually specified the optimal wire section for this model.

Brackets are needed to install the outer units on the walls, but if you plan to mount them on the roof or the ground, get the metal frame-stands. Pay attention to the load (each model can withstand its own), because the brackets for a 50 kg block will not withstand eighty kilograms.

Anchor bolts, nuts, washers, clamps, self-tapping screws and plugs or stud-nails. without these “trifles” the installation works is simply impossible. Also buy robust and reliable products that can withstand higher loads.

Tools

The installation of the split system is quite realistic with the tools that are available in the home workshop. But for professional installation requires a higher class technique, which allows you to perform similar work faster and better quality.

| Denial of responsibility | Contacts |RSS