Supplementary suction unit with electric heater

Turkov Zenit-1000 Standard

unit, electric, heater

Including consumables and subject to purchase in our store.

The price of standard installation of air conditioner includes communications (copper pipes, cable, drainage hose, thermal insulation) with total length up to 5 meters, as well as brackets, fasteners, cable duct 6x6cm 1m, cable duct for power cable 2m, plug, power cable 3m.

Please note that drilling of the walls is not included in the price and is paid separately, depending on the material of the walls and the length of the route

Installation in two stages (exits)

In the first phase before the finishing of the room installed outdoor unit, laying communications. After completion of repair in the second phase, install the internal unit and run the system. In this case, the surcharge for the second checkout will be from 2500 (depending on capacity).

Payment

Pay for purchases in a convenient way. There are 2 payment options available in the Climall online store:

At the store self-delivery or upon delivery by the courier you can inspect the goods for completeness of the package and the goods themselves, compliance with the order, availability of full equipment, etc. If everything is OK, you sign the accompanying documents and pay in cash. Extra work (installation, mounting/dismounting, cleaning, etc.) is charged the same way.д.).

If necessary for businesses and individuals is available payment by bank transfer. To do this, tell the manager that you need to issue an invoice for payment. Delivery is made only after full payment of the bill and receipt of funds to our account.

Delivery

There are several delivery options at the Climall online store:

  • by courier in Moscow and Moscow region. 500 in Moscow and 30 rubles./km in the region;
  • self-delivery from the store. free of charge;
  • a transportation company for delivery to the regions. TK rates, free delivery to the pickup point.

Climall webshop presents only certified products with manufacturer warranty.

We are official dealers of Mitsubishi Electric, Toshiba, General Climate, Hisense, Royal Clima, Panasonic, Daikin, Carrier, Hitachi, LG.

In case of product failure before the warranty period expires, you can apply directly to the manufacturer’s official service center or contact us to help us find the service center nearest to your home. over, if the warranty has already expired, you can also contact the service center. in most cases, the repair will be free of charge.

Warranty conclusion only by authorized service center.

Zenit-1000 Standard supply and exhaust unit with recuperator equipped with electric heater and automatics.

Retail for TURKOV equipment are effective all over Russia. To buy on the manufacturer’s website or from regional distributors and dealers.

System configuration

  • F5 supply and exhaust air filter
  • EC supply and exhaust fan
  • Electric supply air heater
  • Two enthalpy recuperators
  • outdoor air temperature sensor
  • supply air temperature sensor
  • Automation (monocontroller v.2)
  • casing with thermal and noise insulation “Saint-Gobain” 50 mm
  • Four brackets to mount the unit to a wall or ceiling

Block-1100 duct air cleaner

Duct type air cleaner with filtration class H13 to be used in places where high air quality is required. The equipment can be connected to Zenit and Zenit HECO air handling units. 99.99% air purification with HEPA H13 filter

Sound attenuator round 250d / 900mm

  • Effective noise reduction.
  • Acoustic attenuators through the use of non-flammable basalt-fiber mineral wool.
  • Cassettes are covered with glass fleece to prevent mineral particles from being blown out.
  • Mounting in any position.

Round silencer 250D / 600mm

  • Effective noise reduction.
  • High acoustic characteristics of sound attenuators due to the use of non-combustible basalt-fiber mineral wool.
  • Cassettes are covered with glass fleece to prevent mineral particles from being blown out.
  • Mounting in any position.

Pressure sensor for VAV system

Synchronous control of supply and exhaust fans. Pressure sensor for VAV system. Analog pressure sensor. Measuring range: 0 to 3,92 kPa (400mm).в.st). Maximum pressure: 16 kPa. Supply voltage: 4.75 to 5.25 V. Accuracy of measurement: ±2%. Connection according to the three wire diagram: GND. power supply, data.

Humidity sensor for humidifier / dryer control

Digital sensor for temperature and humidity in the room

Measuring range of humidity: 0 to 100%.

Accuracy of humidity measurement: ±2% in the range from 20 to 80%.

Measuring range of temperature: from.40 to 120°C.

Accuracy of measurement of temperature: ±0,3°C.

Sensing element: Polymer capacitor.

Time interval of sensitivity: 2 sec.

Three wire connection: power supply (Vdd), common wire (GND), signal wire (DATA).

Maximum signal cable length: 40 m.

Single line data transfer (1-Wire protocol).

Extract air temperature sensor

Sensor required for CFC operation, sensor installation is not required for water-based air conditioner.

Digital temperature sensor with 9 to 12 bit resolution.

Accuracy of measurement: ±0.5°C in the measuring range from.10 to 85 °C.

Connection by two wires: braid and white wire (GND), red wire (DATA).

Data transmission in series, on the supply line.

1-Wire data transfer (1-Wire protocol).

CO2 sensor for CO2 system

Synchronous supply control. and exhaust. fan. CO2 sensor. CO2 measuring range: 0 to 2000 ppm, 0 to 5000 ppm. Supply voltage: 3.3V to 5.5V (5V recommended). Data transmission interfaces: asynchronous serial 9600 baud, PWM signal. 3-wire circuit for PWM data transmission (GND, power, data) and 4-wire circuit for asynchronous serial data transmission (GND, power, data transmitter, data receiver).

Combined supply and exhaust grille 250D

Combined supply and exhaust grille COMBI is used when it is not possible to locate two separate air ducts for fresh air intake and exhaust air discharge into the street at the minimum distance between them. With a COMBI grille the air intake is on the side faces, the air outlet is on the side faces. Through a separate duct that goes through the space for the intake of outside air. Vertical configuration possible.

Functional diagram

Casing in steel, mirror design, therefore right-handed and left-handed version simultaneously.

CP. built-in Monocontroller Turkov v.2 P. M1 wall-mounted control panel. supply air fan M2. Exhaust fan D1. Ambient air temperature sensor D2. Supply air temperature sensor K1, K2, K3. enthalpy recuperator F1. exhaust air filter F2. Supply air filter E. Electric heater 3,0/4,5 kW.

Installation options

  • Stable recuperator performance up to.25°С
  • Precise maintenance of supply air temperature
  • Infinitely variable heater output control.
  • Switchable maximum heater output (3.0/4.5 kW)
  • 3 individually adjustable speeds
  • Separate setting of the supply air fan and exhaust air fan
  • Heat recovery, return efficiency 65%
  • Moisture return, return efficiency 40-50%
  • Factory setting
  • Permitted to be installed outdoors or in cold areas
  • No condensation
  • Operates without preheating
  • Can be mounted in any position

Automation options

  • Individual setting of three fan speeds
  • Individual adjustment of the supply and exhaust fan
  • Programming of the unit for a week, 6 events per day
  • Control of the air filter by exhaust time
  • Electric heater control
  • auto restart in case of power failure
  • “EMERGENCY” fire alarm connection
  • “PAUSE” interruption of operation by external device signal through a “dry contact”
  • Freezing control of the recuperator OPERATIONAL AUTOMATIC OPERATIONS

Automatic pressure control in the supply and exhaust ducts. VAV system

Automatic maintenance of C02 concentration in the room. CO2 system

Automatic maintenance of humidity in the room. HUMIDITY CONTROL

AC management freon/water. CONDITIONING

Static pressure chart

Delivery in Moscow and Moscow region up to 10 km from the MKAD ring road

Terms of delivery are listed in the card of each item. Delivery charges are paid separately. Delivery is made by a transport company.

General Information

If you want to know about the terms of delivery and payment, but do not want to read about them, then please contact the sales assistant in your city, which will certainly help you.

The on the site may differ from the retail in different regions, this is due to logistics costs. The price of the ordered goods is valid for 24 hours from the moment of placing the order.

Payment with bank card on site

Payment by bank card on the site is made through a payment system. After registration and payment of your order our sales consultant will contact you to confirm the Order and to clarify the terms of delivery.

General Information

Service life of the air handling unit, produced by our company, is established on condition of observance of operating rules and timely replacement of filters and parts with limited resource. The list of such parts and their service life is given in the owner’s manual for each particular model.

We strongly recommend you to apply to service centers in your region or to Moscow representative office if you have any problems connected with operation and serviceability of the equipment.

In order to avoid misunderstandings we kindly ask you to carefully study the User’s Manual, pay attention to the warranty conditions, check if the warranty card is filled out correctly. The warranty card is valid only if the following items are clearly and correctly indicated: the model, serial number of the product, date of sale, clear stamps of the seller and installer, the signature of the buyer. The model and serial number of the product must correspond to those indicated in the warranty card.

Warranty limitations

If these conditions are violated, as well as the data in the warranty card has been changed, erased or copied, the warranty card is invalid.

In this case, you are advised to contact the retailer to obtain a new warranty card, which fulfills the aforementioned conditions. If the date of sale is impossible to establish, in accordance with the legislation on consumer protection, the warranty period is calculated from the date of manufacture of the product.

The warranty period for recuperators is 7 years.

A 7-year warranty is applicable if the unit is operated according to the operation manual “ZENIT Unit Operator’s Manual”. Warranty does not apply to equipment operated in rooms with high humidity (swimming pools, saunas, rooms with humidity over 50% in winter), but the warranty can be preserved if the equipment is equipped with a channel dryer.

Delivery in Moscow and Moscow region up to 10 km from the MKAD ring road

Terms of delivery are specified in the card of each product. Delivery charges are paid separately. Delivery is by a transport company.

General Information

If you want to know about the terms of delivery and payment, but do not want to read about them, then please contact the sales assistant in your city, which will certainly help you.

Online may be different from retail in different regions, this is due to logistics costs. The price of the ordered product is valid for 24 hours from the moment of placing the order.

Payment with bank card on site

Payment with bank card on the web-site is made through a payment system. After registration and payment you will be contacted by our sales consultant to confirm the order and clarify delivery time.

One of the most popular ways of payment in online stores. Payment is made upon receipt of the goods or service. Usually this happens when delivering goods by courier or when picking up the goods from the seller’s warehouse.

Payment for online purchases through Sberbank of Russia

Currently, Sberbank of Russia has the most widespread network of branches across the Russian Federation.

The buyer is displayed a form for payment through the Savings Bank of Russia. This notification form is already filled out with the necessary data about the seller and the amount of payment. Buyers will only have to enter their name and date and pay the bill at any convenient Sberbank branch

Payment through Yandex payment system.money

For buyers who use Yandex payment system.money. They need to be registered and have their virtual wallet in this system.

After the buyer filled in the necessary data on the “Shopping cart” page of your online store, he enters his wallet. Here he will see the form of direct transfer of money from his purse on your purse where all necessary details are already entered, and the buyer should only click the button “ОК”.

For connection to this way of payment you need to be registered on a site Yandex and to activate an internet-wallet in which will accumulate the payments received this way.

The system offers different ways to withdraw money from the virtual wallet.

General information

Service life of the air handling unit equipment produced by our company is established on condition of compliance with the rules of operation and timely replacement of filters and parts that have a limited resource. The list of such details and their resource is specified in the user manual for each specific model.

We strongly recommend that you contact the service centers in your region or Moscow representative office if you have any problems associated with the operation and performance of the equipment.

In order to avoid misunderstandings, we earnestly ask you to carefully study the user’s manual, pay attention to the warranty terms and conditions, and check that the warranty card has been properly filled out. The warranty card is valid only if the following items are clearly and correctly indicated: the model, the serial number of the product, the date of sale, the clear stamps of the seller and the installer, the signature of the buyer. The model and serial number of the product must correspond to those indicated in the Warranty Card.

Warranty limitations

In case of violation of these conditions, as well as in case if the data indicated in the warranty card has been changed, erased or copied, the warranty card will be declared invalid.

In this case we recommend that you apply to the seller to receive a new warranty card that meets the abovementioned conditions. If the date of sale cannot be established, in accordance with consumer protection law, the warranty period is calculated from the date of manufacture of the product.

7 years warranty on recuperators.

The 7 year guarantee is applicable to equipment operated in accordance with all the rules of operation, as prescribed in the “ZENIT Unit Operator’s Manual”. Warranty does not apply to equipment operated in wet rooms (swimming pools, saunas, rooms with humidity of over 50% in winter), but the warranty can be preserved if the equipment is equipped with a ducted dehumidifier.

Ventilation units

The right choice of ventilation unit will help to create the necessary environmental conditions for the health and well-being of people living, office or industrial premises, which will meet the requirements of efficient performance of work, technological processes, the preservation of materials, products, technical equipment, cultural items, books, etc.д.

Ventilation systems can be categorized in several ways. Depending on the direction of flow the categories of ventilation units can be subdivided as follows:

  • supply system, which delivers air to the premises from the outside;
  • The exhaust system, which takes in and expels contaminated air to the outside;
  • supply and exhaust ventilation unit that performs both functions.

Presented in this category in the online store “Tsar-Klimat” models of supply and exhaust ventilation systems are the ideal option: qualitatively performed by our company’s specialists the installation of fans will balance the functionality of the equipment, thereby avoiding drafts and the effect of “slamming doors”.

All ventilation units, which you can buy in this category or, if necessary, get necessary consultations from our specialists, are implemented with the function of recuperation: the thermal energy contained in the extracted air is used again for heating the inflowing air. Thus, energy consumption is significantly reduced. The heater can be a traditional electric heater or a water heater (optional).

A wide range allows you to choose models to suit the room’s architecture and the customer’s requirements: horizontal or vertical, and universal installation. Installations are controlled using an intuitive interface.

The air handling unit, the price for which depends largely on output, working pressure, heater capacity, noise level, and installation of additional filters, is a technical unit with its own specifics of installation, connection diagrams, coordination of power supply network, etc.д. Only professional specialists with many years of experience can provide qualified maintenance of ventilation equipment and, if necessary, repair of fans.

ESO 160/1-1,2/1-A 74 340 ₽ Buy Compare
ΕO 160/1-2,4/1-A 74 800 ₽ Buy Compare
ESO 160/1-3,0/1-A 74 800 ₽ Buy Compare
ESO 160/1-5,0/2-A 76 500 ₽ Buy Compare
ESO 200/1-3,0/1-A 79 570 ₽ Buy Compare
ESO 200/1-5,0/2-A 81 030 ₽ Buy Compare
†O 200/1-6,0/3-A 53 098 ₽ Buy Compare
ESO 250/1-3,0/1-A 84 080 ₽ Buy Compare
ÉCO 250/1-6,0/2-A 84 330 ₽ Compare
ESO 250/1-9,0/3-A 98 160 ₽ Buy Compare
ESO 315/1-3,0/1-A 87 160 ₽ Buy Compare
¸ESO 315/1-6,0/2-A 89 070 ₽ Buy Compare
ESO 315/1-9,0/3-A 103 190 ₽ Buy Compare
EH/CAUF 315/1-12,0/3-A 104 550 ₽ Buy Compare
  • Heater with stainless steel heating elements.
  • All electric heaters have one heating step.
  • Two levels of electric heater protection against overheating.
EH/CAUF 500-1,2/1 2 912 ₽ Buy Compare
EH/CAUF 500-2,0/1 4 041 ₽ Buy Compare
EH/CAUF 500-5,0/2 4 313 ₽ Buy Compare
EH/CAUF 800-2,4/1 3 565 ₽ Buy Compare
EH/CAUF 800-5,0/2 4 422 ₽ Buy Compare
EH/CAUF 800-9,0/3 5 485 ₽ Buy Compare
EH/CAUF 800-12,0/3 6 432 ₽ Buy Compare

KPU compact air handling units with automation

Low and medium volume KPU units are economical solutions for supplying cleaned and heated air to small and medium sized spaces: offices, stores, houses, apartments and farms.

The compact air handling unit includes:

Removable cover provides quick access for equipment maintenance. Fresh air units fully assembled and ready to install.

KPU series compact air inlet unit is a budget and compact air inlet unit with an air capacity ranging from 400 m3/h to 6000 m3/h, monoblock type, with a built-in water or electric after-heating of the inflowing air, which organizes the supply of fresh and purified air to create a comfortable microclimate in the premises. At any time of the year it supplies fresh, clean, and, if necessary, heated air.

KPU line of air handling units is designed for servicing small size rooms:

Fresh air supply and exhaust units

Considering the supply and exhaust ventilation units, we present a single housing, small-sized unit for the organization of ventilation systems in the premises for absolutely different purposes, from residential to industrial, from offices to surgical rooms. Almost all manufacturers produce supply and exhaust units in noise-absorbing housings, using special materials to absorb noise from the fan. Thus, these units can be installed directly in those rooms that need to be ventilated.

When selecting air handling units with heat recovery, as well as other types of units, special attention should be paid to the characteristics of the fan, which is individually selected for each compact air handling unit.

It is worth remembering that almost always supply and exhaust ventilation systems with and without recuperator, loaded with a system of ventilation ducts, which in turn create a certain resistance to the air flow, which directly affects the air exchange in the room. You should also pay attention to rational choice of air heating variant. Depending on the capacity of the air handling unit, either an electric heating circuit or a water heating circuit for the supply air should be chosen.

We draw your attention to the fact that often customers do not pay attention to the allocation of the necessary space for laying the calculated section of air ducts. Remember that reducing the duct cross-section leads to an increase in air velocity, which in turn negatively affects the noise performance of the ventilation system as a whole.

Our supply and exhaust units can be installed in pantries, bathrooms, laundry rooms and balconies. Such a wide range of installation sites is justified by the compactness of ventilation units.

The latest innovation from manufacturers has been the use of heat recuperators in the extract units. Let’s see how it works in a nutshell. The recuperator is installed in the path of the supply and exhaust air flow. Due to the intersection of these streams, the exhaust air gives the heat accumulated in the premise to the supply of outside air. Coefficient of efficiency can be up to 90%, which has a very positive impact on costs associated with heating the air during operation of the supply and exhaust system in the room.

Inlet-exhaust units

Supply and exhaust systems provide inflow of clean air into the premises and removal of waste air. Main functions. purification of air flow, reducing the number of harmful impurities, elimination of extraneous odors.

What is the difference between a supply and exhaust ventilation system and a supply and exhaust unit?

The combined extract and input ventilation system is suitable for apartments and detached houses of up to 100 sq. m. of gross floor area. м. It guarantees a complete renewal of the air masses in the rooms, the systems are relatively inexpensive and easy to install. The air-supply and exhaust unit is used in large cottages and buildings. Even inexpensive models are equipped with special filters for air purification, their power allows efficient maintenance of the entire floors, in winter they heat the air before supplying to the room, and the supply and exhaust units are virtually silent. Naturally, all this affects the cost of equipment, which is also quite difficult to install.

Construction of supply and exhaust systems

Supply and exhaust ventilation for apartments consists of such basic elements:

  • air valve;
  • air intake grille;
  • filter;
  • calorifer;
  • supply and exhaust fan;
  • air ducts;
  • air diffusers;
  • sound attenuators;
  • Thermal and soundproof panels

Types of installation

Supply and exhaust ventilation are of the following main types:

With heat recovery. Such units saturate the room with warm air in winter and cold air in summer. It is better to buy a supply and exhaust ventilation with recirculation for a house, office, cottage, hotel.

With recirculation. The principle of recirculation involves the reuse of air with the mixing and removal of a certain part of the air mass. Typically, these units are used in commercial areas.

With cooling. Such systems are equipped with special elements for cooling air flow. For use in rooms where products and materials are stored.

With air conditioner. The supply and exhaust unit with air conditioner using special regulators selects the optimum mode depending on the microclimate in the room. The advantages of systems. compact, low noise, ease of operation

How to choose the supply and exhaust system

When choosing supply and exhaust ventilation systems one should consider the area of the room and the peculiarities of the climate. For small families fit the device capacity of 60 m3 / h, and for large families need a supply fan with a capacity of 90-120 m3 / h. The filtration system is also important. In an industrial area you should choose devices with two filters or a breezer, and for a country house one filter is enough.

If you are interested in installation of air inlet and exhaust systems fans from trusted manufacturers, contact our company Climall. Our advantages are high quality services, experienced professionals, a wide range of fans, reasonable prices. To contact our managers and buy fans for the air-supply system you can through the site or by phone, listed above.

Inlet and outlet units

Supply and exhaust units are functional, highly effective systems for providing and maintaining optimum microclimate in the premises and buildings of residential and non-residential purposes. The structure includes several elements, each performing an important task: cleaning, dehumidifying, cooling, heating, air extraction outside, forced supply of clean air into the room.

The original manufacturer of the equipment is an organization that sells under its own name and brand.

Pascal unit of pressure (mechanical stress)

Model series is a classifier that selects a particular (collection / series) of a particular manufacturer. This function speeds up your search for the model you are looking for.

Composition. What material is the equipment made of.

Recuperator Surface-type heat exchanger for use of the heat of exhaust gases in which the heat transfer between the heat transfer media is carried out continuously through the wall separating them.

Installation can be horizontal or vertical, and universal or floor

Types of filters and the dirt they trap

Coarse dust filters classes G1(EU1), G2(EU2), G3(EU3), G4(EU4) Fine dust filters classes F5(EU5), F6(EU6), F7(EU7), F8(EU8), F9(EU9) High efficiency filters H10(H10), H11(H11), H12(H12), H13(H13), H14(H14)

Noise reduction in the equipment. Most often the equipment is made in a soundproofed enclosure, which plays a role in sound insulation. Noise measurement is expressed in decibels.

EC motors, or electronically commutated permanent magnet motors. Brushless DC motors with external rotor with integrated control function and direct connection to the AC mains. Unlike traditional motors, with transformer or electronic control of speed, in EC-motors an optimal and effective work at any speed is ensured by electronic (contactless) switching.

A ventilation unit is a single piece of equipment assembled to provide ventilation for the premises under certain parameters. The equipment comes in different versions.

ErP fans meet the requirements of the Environmental Design Directive (ErP) for energy-related products, which sets efficiency limits for fans.

Suction heaters to heat and manipulate products contained in storage tanks

Duct fans are the most common devices for ventilation systems, as well as versatile: can supply air into and out of the room. They are quite compact and can be easily built into ventilation shafts or ducts.

Motorwheel (ebmpapst) made in Germany

Practical and profitable solution for industrial, office and administration buildings. Our company offers a wide range of units, fans and accessories for the installation of a reliable and durable system.

How to choose a unit?

The structure of the system includes several interrelated functional parts, which together provide the implementation of the tasks. The system includes: fans, filters, sound attenuators, trunking, valves, automatic elements for controlling the installation. To buy a supply and exhaust units, pay attention to the technical features of the devices, relating them to the tasks they need to perform.

In order for the installation to be functional in a particular room, you need to know the following data:

  • The purpose of the room, the peculiarities of the air composition;
  • The level of fire hazard;
  • The number of people who will be in the room (especially for industrial installations);
  • The height of the ceilings and the area of the rooms;
  • Type of building residential or non-residential;
  • A set of tasks to be carried out.

Features of the range

In the catalog you will find products of domestic and leading European manufacturers:

    German manufacturer of high-quality, innovative ventilation equipment for residential, industrial and administrative buildings. The brand offers units with recuperators, accessories, additional devices for ventilation systems.

  • Ostberg is one of the best known European manufacturers of ventilation equipment. Offers a wide range of special equipment, which is rated the highest by both users and industry experts. SAU units are suitable for small rooms, are compact, low-noise, economical. Supply and exhaust units HERU efficient device of high quality, low noise level and efficiency.
  • Arktos is the leading manufacturer in terms of sales in Russia. The brand is focused on versatility offers the installation, both for residential and industrial buildings, premises with specific conditions. Air handling units Compact is a thoughtful solution for ventilation of buildings and structures for various purposes.
  • Systemair is major European company based in Sweden, known in 45 countries of the world. Long years of development allow to guarantee the quality of products, functionality, actively and effectively use modern technology. Russian producer with a focus on the domestic market and the countries of Asia, Europe. Main activity is development of effective ventilation systems for residential and commercial buildings.
  • High level of functionality: provide an optimal microclimate in all respects, even with closed or no windows;
  • Fast removal of waste air masses;
  • Low noise level;
  • Possibility to control air humidity;
  • resistance to external influences;
  • Variety of equipment, which allows you to pick up a model for a specific purpose buildings;
  • Additional equipment with filters or other accessories possible;
  • Automation system makes regulation easier.

With a smart navigation system you can easily select the model according to your individual requirements.

Plants with electric heating

APPLICATION FIELD General ventilation in offices, stores, cottages, apartments using a network of ducts.

INTENTION Constant supply of fresh outdoor air, free from dust and with automatic temperature control.

Maximum airflow from 500 to 1000 m3 /h.

RANGE OF APPLICATION Suitable for apartments, houses, offices, stores, etc.п. Total floor area from 50 m2 to 1800 m2.

INTENT Constant supply of fresh, dust-free outdoor air, with automatic temperature control and maintenance of the set point.

The PU has an 8-step fan speed control. On its basis it is possible to create VAV-systems, optional Full-VAV-equipment with built-in pressure sensor is possible.

Maximum airflow: 550 to 3500 m³/h

AREA OF APPLICATION Control Gear for facilities with a shortage of electric power.

INTENDED USE Combined with Breezart air humidifier can maintain required temperature and humidity at limited power of electric heater.

Maximum airflow. 1000 m3/h.

INTENT Air handling unit with electric heater and built-in freon cooler.

Maximum airflow. 1000 m3 /hour.

RANGE OF APPLICATION : General ventilation in offices, stores, cottages, apartments using a network of ducts. PURPOSE Air handling units are designed for continuous supply of fresh, dust-free outdoor air, with the possibility of automatic control and maintenance of the set temperature. ECONOM series.

Airflow rate. 105 to 1350 m3 /h.

AREA OF APPLICATION General ventilation in offices, stores, cottages, apartments using a network of ducts. DEFINITION Supply air units are designed for continuous supply of fresh, dust-free outdoor air into the room, with the possibility of automatically controlling and maintaining the set temperature. ECONOM series. Air consumption. 200 to 4000 m3 /h.

All rights to the materials on this site are protected by law.

| Denial of responsibility | Contacts |RSS