What to do if the refrigerator beeps?
Modern models of refrigerators are equipped with audible alarms that warn you if the door is not closed properly or if the temperature inside the unit changes. As a rule, the sound signal is accompanied by the light signal: a special indicator on the fridge body in red or orange blinks or lights up. An alarm when the unit’s door is open “forces” it to close and thus prevents some serious breakdowns.And if you find out that the fridge beeps when the door is closed then this sound can be the alarm signal.
But first of all it is worth ascertaining that there is no other reason of the refrigerator “sociability” besides the malfunction.
- First of all, check whether the fridge door is really closed all the way, nothing is obstructing its complete closure from inside. Probably some handle from the pan or the pan rests against the door. Try to push the crockery standing inside the fridge deeper.
- The cause of the continuous squeaking also can be the simultaneous loading of too many products at the room temperature, which makes the interior of the fridge become warmer. In this case, don’t worry, the squeaking will stop after a few minutes.
- In a new refrigerator, the squeak may be the result of temperature gain. It may take up to 24 hours to reach the desired temperature mode, and during this time some models of refrigerators may be beep.
- There is a thick layer of ice in the freezer compartment and the temperature sensor is “reading” the temperature incorrectly. In this case it is recommended to defrost the fridge completely and see how it operates after defrosting.
- Check if the “Super freezing” mode is on for intensive food freezing. If this is the case, turn it off.
If none of the situations described above resembles your case, we recommend you to think about calling a specialist who will diagnose and, if necessary, repair your refrigerator.
malfunctions requiring repair action
Occurrence of a beep, which cannot be eliminated independently, is often accompanied by additional attributes: blinking of a light bulb, increase of temperature. Let’s list the most likely malfunctions that can be accompanied by these symptoms.
Refrigerant leaking from the system can occur due to the development of corrosive processes, a punctured evaporator or damaged spigot. In addition to the activation of the alarm light, the breakdown often manifests itself in the occurrence of such phenomena:
- Continuous work or too frequent switching on of the compressor;
- Absence of cooling in one or both chambers of the refrigerator;
- activation of light indicator of emergency mode;
- Displaying of information about the error on the device display, in particular in models of brands Ariston, Siemens, Haier.
In order to repair the failure, it is necessary to find the damage through which the refrigerant is leaking, seal it and recharge the system with freon.
Temperature sensor failure
Alarm signal is activated due to the breakage of the thermistor which causes the temperature increase inside the fridge cabinet. The malfunction can affect both one cooling compartment and the freezer.
ХОЛОДИЛЬНИК Gorenje NRK 6191 MC (Отзыв реального пользователя).
Simultaneously with the sound signal you can detect the lack of cold in the compartments of the device, flashing of the indicator light and displaying of the error code on the electronic model. The compressor is running non-stop, trying to regain the desired temperature.
The problem of defect of temperature sensor is often found in refrigerators of trade marks Electrolux, Siemens.
Troubleshooting involves replacing the broken temperature sensor.
If your refrigerator has been in operation for a long time, a piercing squeak when the door is closed can be caused by a faulty compressor. This malfunction is not uncommon in Minsk refrigerators.
The problem can manifest itself in several ways.
- Increase in temperature inside the refrigerator chambers;
- Blinking of light indicators on the display;
- Continuous humming of the compressor.
- Lack of cold inside the chambers;
- Motor housing heating;
- unsuccessful attempts to start the compressor.
- stoppage of cooling of the compartments;
- activation of color indicators on the control panel;
- Disconnection of the compressor at short intervals.
In this situation, there is only one way to solve the problem. to buy a new compressor.
Electronics unit malfunction
Failure of the electronics unit can occur for several reasons:
- frequent changes of voltage;
- Due to oxidation of the board contacts. as a result of high humidity in the room where the refrigerator stands;
- Due to the fault of the manufacturer. because of a manufacturing defect.
An audible alarm is not the only sign of a broken board. In addition, you can diagnose the stoppage of cold in one or both compartments of the household appliance. In some models of refrigerators of such brands as Electrolux and Samsung there is a flashing of the color indicator. The units of Minsk and Virpul will inform the owners about the problem by the constant beeping.
In order to make the fridge-freezer work properly, you should either re-flash the board or replace it with a new one.
Door seal wear and tear
The persistent squeaking noise can be caused by the refrigerator door not closing properly because of the sealant becoming worn. The material damage can also be caused by the way the appliances are used: opening and closing the door too often, slamming the door.
As a result of the peeling and deformation of the gasket, the temperature conditions inside the refrigerator are disturbed and the refrigerator tries to emit sound and light alarms.
You can fix it yourself. For this purpose follow the steps below:
- Determine the place of loose fit by placing strips of paper between the door and the refrigerator body;
- After finding the area where the rubber band has come away from the door, carefully glue it with a suitable adhesive;
- If the area of the sealant damage is too large, remove the deformed rubber sealant and replace it with a new one.
Failure of the cooler supplying air into the refrigerator chambers may look differently depending on the variety of the household appliance:
- In a fridge with the Know Frost system, the temperature inside the freezing chamber of the appliance increases but the compressor is functioning properly. The buzzer sounds continuously and the alarm LED may blink.
- In appliances with Full No Frost system the temperature of the air in both the fridge compartment and freezer compartment will increase in case of a fan breakage.
- On a unit with a drip defrost system, the malfunction will be indicated by the buzzer going off. In this case, the chambers of the device will work in normal mode.
In order to restore the normal refrigerator operation if the cooler breaks, it must be replaced with the new one.
The flap is jammed
One of the reasons of constant noise of refrigerator with Full No Frost system is gate jamming in “No supply” mode. This means that cold air from the evaporator does not flow into the appliance compartment.
There are a number of reasons for this phenomenon: Failure of a reed switch or gear motor, icing on the door.
The way to solve the problem is to replace the broken parts with new ones.
Malfunction of defrost system
Failures in the functioning of elements of the defrosting system most often disturb owners of refrigerators equipped with the No Frost system. Frosting of the air ducts causes the cold air to stop flowing into the main compartment of the appliance. As a consequence, the temperature rises and the refrigerator begins to emit a warning beep.
Besides the audible signal, a thick layer of ice is freezing on the evaporator and the red light is blinking.
Causes of the refrigerator door squeaking unrelated to the malfunction
If the door of the device is closed, and the device itself performs its cooling functions properly, but at the same time the alarm works. the cause of the peep may be minor and can be easily eliminated without calling a specialist.
Pay attention to the following points:
- How long has the refrigerator been plugged in? If the unit is new, it will give an alarm until the temperature reaches the programmed temperature. The unit can reach the desired temperature after a fairly long period of time.
- How tightly the door of the device is closed. If there is even a small crack, the alarm will sound.
- How much uncooled food has been placed at one time. If there is a large number of them, the temperature inside the refrigerator will rise briefly. It takes about 15 minutes for the temperature to return to the correct value, after which the signal will disappear.
- Significant icy layer in the chamber. Temperature sensor in this case fails because it can not read the information correctly and the cooling unit turns on the alarm. Full defrosting of the appliance can fix the problem.
- Is the super freezing mode active. After turning off this function the beeping should stop.
Repair and operation of Gorenje refrigerators
Gorenje nrk 6191 gx double chamber refrigerator (with electronic control, digital display, one compressor motor and No Frost in both chambers). The digital panel on the front door suddenly turned off. Checked cable from door, found 2 broken wires. With some experience in radio engineering, repaired the loop. Turning on the unit, symptoms are: lights on top and bottom indicator light faintly. All other digits are off. LL lights up when you press the top or bottom ON indicator, nothing happens at all when you press any other touch buttons (and LL does not light up). When pressing the “bell”. nothing either. I think that the refrigerator has gone into some kind of lockout mode? How to reset it? Maybe there is some kind of RESET somewhere on the control board (by the way, where is it located)?
There is no reset and no lockout either. You need to check the plume completely, in addition to the damaged plume, there may be some internal damage to the plume. To reset, just unplug the unit for about 20 minutes.
In the two-chamber refrigerator Gorenje rk 41200 w the display shows 14/-18. Chol temperature. The chamber is not dropping even when the unit is in full load mode. What could have happened and how to fix the problem? Is it possible that the sensor is just broken? May need to restart? How to make it work?
Causes of malfunction and incorrect operation of the chill. Chambers could be the following: The temperature sensor has failed and is not signaling the temperature in it; The compressor has burned out. Motor does not turn on or deliver the desired temperature; Control board failure. The board doesn’t properly control the cooling system.
In operation Gorenje rk 6191 aw two-chamber refrigerator with 1 compressor. The compressor runs continuously, the condenser is intermittently hot and cold, the temperature in the chillers is constantly high. The chamber does not reach the setting value (1) and fluctuates in the range of 5. 12 (approximately) degrees. If the unit is disconnected from the network and turned on after three hours, it operates normally for two to three hours, then the condenser cools down, and the compressor continues to work. And so repeatedly. Sometimes the refrigerator and freezer have time to cool, and the compressor automatically stops. Who has faced with this problem?
There is water in the refrigeration system. Freezes in the tube and stops the circulation of refrigerant. The water should be fought by the master. But water in the system is half the trouble. the main thing is to find where it is.
Gorenje rk 6201 fw. A month ago, on the display in the part of the fridge and freezer. EE appeared in the chamber (well I found it, somewhere the loop is frayed, it can be solved). And today after moving the x-ka a little bit, the display is weird at all, the top shows EE, the bottom (freezer part) just dashes “”. Of the buttons, only the power button responds with a beep (and nothing changes on the display) and the mute button (a bell icon flashes, but it is somehow corrupted). The unit is buzzing, like it is working. What to do?
Well yes, “the loop is frayed” and as soon as the EE’s appeared. You should call a mechanic, you have to do everything in time. And now it’s probably too late, replacing the loop may not help anymore. Look for a knowledgeable technician, you need a diagnostic to determine the defective parts.
Bought a Gorenje nrk 6192 mch refrigerator with No Frost system a year ago. Standing. Turned on the other day. Very bad cold. compartment. What can be the reason?
If there is cold in the freezer, the most probable causes of malfunction are as follows: The evaporator heater is defective. The unit has one evaporator in the freezer, and the cold is supplied to the refrigerator by the fan. Heater defrosts it quickly to prevent formation of snow in the freezer; The fan motor is burnt out and the fan is not blowing cool air into the fridge or the evaporator. Defective defrost sensor. It’s the sensor that turns on the heater to defrost the evaporator.
Gorenje rk 41200 fridge. The display shows “Freezer compartment temperature too high” every 2 to 3 hours. Tried setting different temperature range, now it is.16, and all still. What can it be??
The models in this series come in several variations. They come with both 1 compressor motor and two. Always with electronic control. Depending on your configuration, problems may include the following: Freon leak in the freezer system (for 2 compressor models); Compressor motor malfunction. It’s no longer giving the necessary pressure; The freezer air or evaporator temperature sensor has failed. But first of all we recommend to defrost your freezer for 12 hours, then turn on the machine and check. It is very hot outdoors. The freezer compartment may have frozen in (ice has frozen over) and ice is blocking the passage of cold into the compartment.
The Gorenier nrk 6191 mc refrigerator (electronically controlled with No Frost in both chambers) has gone into some strange mode: when I open the top door on the touchscreen control panel on the door, there is an error (?). E0. With the door closed, the touchscreen control panel on the door is set to ECO mode and temperatures 5 and.18. To any presses of the touch buttons on this panel gives error LL, that is, does not allow to change the ECO mode, and therefore, change the temperature or turn on the freezing. The off and on buttons on the same panel also gives an LL. Maybe there is some combination of presses to get it out of this mode? Or the panel is out of order? Compressor can be heard turning on and off, fan can also be heard turning on sometimes. Tried to leave it off for about a day, turned it on. Temperature indicators were blinking (5. 18). Then, when the temperatures inside reach these values, stop flashing.
LL blinking means control lock enabled. You can disable this mode by pressing and holding for 5-7 seconds on the G indicator (alarm off indicator).
Gorenjej nrk 6192 mch refrigerator (with electronic control and FULL No Frost system). On the control module the upper temperature indicator does not light up and the upper chamber does not work, the lower indicator.18, it works, freezer compartment works. Tried to unplug the unit, but can’t restart, shows LL on the upper display and then goes out and that’s it. Please tell me what to do?
Flashing LL. means the control lock is on. You can deactivate this mode by pressing and holding for 5-7 seconds on the G indicator (alarm off indicator). If you have half of the screen not working, it may not be an LL error, but an EE error and it means a fault in the loop.
Troubleshooting Refrigerator Burning
Gorenje nrki 5181 lw built-in refrigerator. The light does not turn on when the door is open, no indication on the display. Started with the backlight being off when I open the door. Replaced the bulb with a functioning. Do not light. Suspicion fell on the reed switch. Could be a broken reed switch. Removed the display board (the reed switch is mounted on it), after returning the display board back in place all the front panel display is off (LEDs and temperature indicators are not lit). Question: which reed switch to replace. to open or close the circuit (I know the current of 0.25A)? Please advise how to replace?
If the reed switch is damaged, the unit does not see the open door and does not turn on the light Hold. Chamber and indication. Disconnect reed switch, short-circuit all solder pins. Lights on, display? If so. The problem is in the reed switch.
We have a built-in two-compartment refrigerator Gorenje rki 4181 aw with electromechanical control and one compressor motor. The fridge is not working. camera. Freezer is working. What kind of repair does it need??
You might have a problem with the thermostat or a freon leak. Need to change the thermostat for a new one, or look for a leak, seal the place and recharge the system.
Bought a few days ago a two-compartment refrigerator Gorenje rc4180aw with electromechanical control. Its noise level is 40 dc. But it makes some extraneous noises when it works: whistling, sometimes squeaking, and it feels like something is jingling in the compressor. Noise is heard most at the top of the freezer. The compressor is not Chinese. Please advise what could be the reason?
Most likely one of the tubes at the back of the fridge is making noises. Move it out of the way and check. Nothing in the freezer compartment can bang, i.e.к. You have a model without No Frost. Also check the condensate vessel on the compressor, perhaps it is poorly secured.
After the purchase of the built-in refrigerator burning rki 5181 kw was installed in the kitchen and a year of problem-free operation. After about a year the compressor burned out, a repairman came and replaced it under warranty without explaining the cause of the failure. The unit worked, but here’s the problem, after the set temperature it stopped shutting down. Repeated call and replacement of the solenoid valve did not solve the problem. After much deliberation, we decided to order the control module. Ordered module came in, replacement and the problem remained. The Warranty expired, the repairman opened his hands and left. Need sound advice on how to rebuild and repair.
Probably bricked up, and from overheating broke the compressor, varnish went into the system, jammed the valve, disrupted circulation and heat exchange in the evaporators and condenser.
I have a model rc 4180 aw with one compressor and two evaporators (in x.to the top and m.to the bottom). The flow is switched by the valve kmv 432. Lately the mk has stopped working (shows 0 and intermittently), x.к. works and keeps the temperature. Called a master, he said that you need to change the control unit T.к. I have decided to try and solve the problem myself, I’ll always have time to replace the block, and I don’t believe in cardboard cracks.к. modern electronics. reliable enough. First I removed the board from the connectors, and wired up the temperature sensors. There are 4 of them in total, and they were all serviceable (resistance about 4-5 com). Checked the valve, it switches too, t.е. when you disconnect the x.к., then the temperature in the mc starts to go down, when you turn on x.к. I checked the valve, it switches back on again, and in the m.к. begins to rise in temperature. Who can tell me what could be the problem? I do not believe that the control board is to blame.
If compressor is running long and does not rest much, it means that you have low freon pressure. The electronics are most likely malfunctioning.
Inside the Gorenje rkv 42200 e two-chamber fridge there is frosting under the freezing chamber that is on the top, this did not happen before. It’s constantly running and won’t shut off.
Check the seals for mechanical damage and check the thermostat. Most likely, the water drain hole from the freezer is frozen, so part of the water gets into the chamber. It is necessary to defrost the unit thoroughly.
Gorenje rki 5181 kw built in dual chamber refrigerator. Beeping very often, as if the door is open. And the second problem. There’s no light inside the unit. If you turn it off, the light comes on, but when it starts to cool, it goes off again.
The refrigerator squeaking means that there is not enough temperature in one of its chambers. This could be due to a faulty control module or a malfunction in one of the temperature sensors. The situation with the light bulb may indicate a breakdown in the control module or in the light bulb itself.
Built-in two-compartment refrigerator Gorenje nrki 5181 lw (with electronic control, No Frost system and drip system of defrosting). Does not freeze the refrigerator compartment, but in the freezer on the contrary, the temperature has dropped to.24 degrees. What could be the reason? First of all. The compartment started working, the walls were covered with snow, and then after 15-20 minutes everything started to thaw. Tried turning it on / off several times. Result: in the freezer.24, fridge 9 degrees blinking, button on the sensor does not lock.
Т.к. your model has a drip defrost system chol. cameras, then work it with thawing droplets. is an absolutely normal system. The droplets are formed because the evaporator is behind the plastic and after switching off the droplets condense and flow down the drain. No need to worry about this. Turn it on in the freezer compartment.16-18 degrees, and 57 in the refrigerator, and leave the unit alone for a couple of days without turning it on and off, it will work fine.
After 5 years of faultless operation the refrigerator Gorenje rkv 42200 e (usual two-chamber with one compressor) began to freeze an ice cap on the back wall of the cold. cameras. The thermostat was set to 2-3, but it did not help. Thus the freezing chamber also freezes strongly (there is an ice coat), and the unit itself works equally without any changes. What is the reason, can I fix the problem myself?
Gorenje appliances really stand out for their faultless operation and reliability. In your case, if you have never defrosted both cameras in 9 years, we recommend this procedure. That is, for 12-24 completely turn off the equipment, then wipe it and turn it on empty. After an hour of running the empty unit, you can put the food back in. If you defrost it regularly (at least once a year), it is possible that there is a clog in the capillary system. In this case, the ice (“coat”) freezes unevenly (usually more to the right edge). In this case it will not be possible to repair it independently, it is necessary to call the master for “breakdown” of a blockage.
Why the refrigerator beeps?
“Why does the modern refrigerator beep all the time?? How to turn off the sound? What malfunctions can cause the beeping? Let’s consider the most widespread malfunctions, which can be accompanied by an annoying squeak”
Modern refrigerators of different manufacturers are equipped with the option of sound notification about the unclosed door. It would seem that it is very convenient, but sometimes this squeak brings inconvenience to the user, because in case of malfunction it can signal continuously for more than one hour. In this article we will tell you why the fridge beeps and what factors can cause it.
To understand why the refrigerator beeps, you should consider the main reasons for the unpleasant sound. There are several of them, some require calling a master.
If your Bosch refrigerator squeaks, there is a possibility that a temperature failure has occurred. Such a situation is observed when:
These situations do not require a call to the master. Check that the interior doors are properly closed and that the food has been placed correctly. At the same time, check for debris between the rubber seal and the cabinet.
You should wash the contact places with water and soap to remove dirt.
If the unit beeps after defrosting or because the door is not properly closed, the sound will disappear when the temperature in the chambers is at the optimal level. The process takes from 15 minutes to 4-5 hours. If this does not happen within a day, you should disconnect the equipment and call a master.
Control system malfunction
Squeaking is sometimes caused by control panel malfunction or damage. Such phenomenon is observed when there is dirt, dust, grease clogging up the space between the buttons. The control system does not work properly as a result.
To prevent the refrigerator Biryusa, Bosch or any other model from squeaking, it is recommended to wipe the panel with a wet rag moistened in soapy water. Once the dirt is removed, the control panel should be tested for proper operation. After that the squeaking sound must disappear.
If the buttons work, switching modes, but the sound remains, check the parameters of the set temperatures. LG refrigerator beeps when the quick freeze function is activated. You need to turn it off to stop the squeaking.
When the buttons on the panel do not respond to manipulation, you should call a master. The circuit board may have to be replaced due to wear and tear or water and dirt getting inside the electronic part. Repair costs depend on the brand of equipment.
The cooling system is iced up
The refrigerator “Atlant” can make a squeak when the cooling system is icing up. Owners of models with the No Frost system can also face this problem. This problem requires defrosting the unit and removing the ice.
Frosting can affect not only the chambers but also the space between them. If you simply remove the ice without defrosting it, the squeaking sounds won’t go away. It is necessary to defrost the equipment completely, then the problem will disappear. There are cases when this measure does not help, and the sound remains. It speaks about a malfunction, for carrying out diagnostics and elimination of a squeak it is necessary to invite the master.
If the refrigerator Liebherr, Bosch or any other model squeaks when the door is closed, the problem may lie in the incorrect operation of the compressor. The device must periodically turn off and not work all the time.
It is necessary to get acquainted with the instruction and to learn about the duration of work and rest periods of the compressor. When the unit does not turn off, it indicates a malfunction. It is difficult to independently determine the problem. It will be necessary to apply to the service center and call a master. It may be necessary to replace the entire compressor, but in some cases it is enough to put new parts and refill the freon.
Electronic display defect
Squeaking sound sensors in some cases may be accompanied by a lack of any indication of the digital display. Often the problem is accompanied by the termination of the lighting of the unit’s chambers.
The most common cause is damage to the cable between the control module and the door. The defect is eliminated quite simply. by replacing the loop with a new one.
Door closing sensor failure
If Liebherr fridge beeps there is a probability of door closing sensor failure. It is impossible to correct the problem yourself without knowledge in this area. You should call a handyman to carry out the repair. Until this time it is recommended to turn off the equipment.
One of the reasons of constant noise produced by refrigerator with Full No Frost system is gate jamming in “No supply” mode. This means that the cold air from the evaporator does not flow into the appliance compartment.
There can be several reasons for such a phenomenon: failure of reed switch or geared motor, icing of the shutter.
The way to solve the problem is to replace the broken parts with new ones.
Loss of air tightness
This sound could indicate damage to the door’s rubber gasket. It is not sealed tightly and warm air is getting in. The sealant may be deformed, cracked or come off. Sometimes it becomes clogged with food crumbs and does not ensure air-tightness. The flap needs to be washed, glued, and lubricated with silicone.
You can check the tightness with a piece of paper: clamp it with the door and try to pull out. If it is easy to do so, it is better to change the gasket.
Gorenje NRK 6202 GHW4. обзор холодильника с NoFrost Plus и Fresh Zone
Failure of the cooler, which supplies air to the refrigerator chambers, may look different depending on the type of appliance:
- In a fridge with the No Frost system the temperature inside the freezing chamber of the appliance increases while the compressor is functioning properly. The audible signal sounds continuously, the alarm LED may blink.
- In appliances with the Full No Frost system, if the fan breaks down, the air temperature in both the cooling compartment and freezer compartment will increase.
- In the appliance with a drip-freezing system the defect is indicated by the activation of the sound signal. In this case, the chambers of the device will work in normal mode.
To restore normal operation of the refrigerator when the cooler is broken, it must be replaced with a new.
Malfunction of the electronic block
Failure of the electronics unit can occur due to several reasons:
Hello. When you turn on and off the compressor of the refrigerator Gorenje NRK6201EW4 there is a knock. Video of switching off.
Why the compressor of the refrigerator does not start more than 2 months ago Gorenje RK 65364 E Refrigerators
Hello. Gorenje RK 65364 E two-compressor refrigerator, the upper chamber is working properly. The bottom chamber works fine.
New Gorenje RK 63392 E Fridge more than 3 months ago
Hi all. The refrigerator Gorenje RK 63392 E gives out an error on the display EE, the upper chamber and the freezer, what is this error and how to fix it?
The refrigerator makes a strange sound more than 6 months ago Gorenje NRK6201SYW Refrigerators
Hello. The new fridge Gorenje NRK6201SYW after a few days of operation occasionally began to make a sound, like a screw.
The cooling chamber does not cool more than 6 months ago Gorenje NRK 6201 TX Refrigerators
How do you live? Gorenje NRK 6201 TX refrigerator works fine for a month, freezer freezes and fan runs. After that.
Refrigerator does not cool more than a year ago Gorenje NRK6201ES4 Refrigerators
Hello. Gorenje refrigerator NRK6201ES4. At first, the back wall like winds up only noisily, and today the indicator light flashed.
Good night. The freezer in the Gorenje refrigerator works fine, but in the main chamber in the center of the back wall is heating, and on the.
Problem with refrigerator burning more than a year ago Gorenje NRS9181VXB Refrigerators
Hello. Gorenje NRS9181VXB fridge bought 3 days ago. Before turning it on, waited 8 hours. It’s constantly on and on and on. Noise.
The refrigerator does not light up the power indicator more than a year ago Gorenje NRK 6191 TX Refrigerators
Hello. Yesterday took apart the freezer in the refrigerator Gorenje NRK 6191 TX, taking out all the drawers, and then put them back already filled.
Ice forming on the back wall of the refrigerator more than a year ago Gorenje RK 4295 E refrigerators
Hello! Within a year, in the refrigerator Gorenje RK 4295 E at a specified place (cork blue), a small piece of ice is formed, and under the.
Gorenje RKI 2181 A1 fridge gurgles more than a year ago Gorenje RKI 2181 A1 Refrigerators
Good afternoon. Gorenje RKI 2181 A1 refrigerator every time the door is closed it gurgles all over the apartment, is this normal? over, put it.
Hello! The temperature jumps in the refrigerator Gorenje K357/2MELA (not in the freezer, but in the refrigerator). I set one temperature and.
After switching off the compressor, the fridge begins to make some strange noises: squeaking. clicking, crackling, etc.д. At first.
Built-in fridge. The temperature in the refrigerating compartment rises up to 9. When I open the window the temperature.
Fridge breakage burning more than a year ago Gorenje NRK 6201 TX refrigerators
Refrigerator Burning NRK6201TX, the refrigerator does not turn off, and the freezer does not freeze, solenoid valve works, tell me in.
Gorenje fridge doesn’t turn off more than a year ago Gorenje RC 4180 W Refrigerators
Hello. Our fridge Gorenje does not turn off at all and constantly works, but what to do we do not know, please help?!
The freezer compressor does not turn off more than a year ago Gorenje K 337/2 MELB Refrigerators
The freezer compressor does not turn on and the electronic display of the freezer does not light up, what is the reason?
Gorenie refrigerator turns on, hums for 3-5 seconds and turns off for a moment, with the light bulb flashing, turns on again and.