The handle of the door of the Washing machine Indesit broke.

The handle broke on the washing machine Bosch Logixx 8

Problems with opening or closing the hatch in Bosch washing machines can occur for no apparent reason. If the hatch is not closed, then errors will begin to be given. When blocking, the main recommendation is not to make physical efforts and not pull the handle that may break. Do not use tools and improvised tools for forced opening the hatch. If the reason is not a breakdown, then there are simpler ways for this.

  • If the Bosch washing machine has passed the full cycle and there is no water in it, then it is better to wait 4-5 minutes. It is possible that the team has not yet entered the program to open the hatch.
  • If this did not help, then you can pull the fork out of the outlet, wait 15-20 minutes, then turn on the car and try to open the hatch.
  • You can start the washing program again. Bosch washing machine will check whether the hatch is closed, unlock it and block it again. Immediately after a characteristic click that indicates unlocking, you need to have time to interrupt the washing program.
  • Use the cable of emergency opening, which is located next to the drain filter on the front panel. You can recognize it by color (orange or yellow). If there is a cable, then you need to carefully pull it. For forced blocking without a cable, you need to remove the top panel. After that, tilt the car, feel the latch and take it to the side.

How to fix a door handle to the Indesit W105TX washing machine

Recently, a sister broke off a handle from the door of the washing machine. Most likely this happened due to the fact that they tried to open the door ahead of time, without waiting for a shutdown of protection from the fool, and perhaps the unsuccessful design of this very handle affected. In the photo below the door is already disassembled, in principle, there is nothing complicated in its disassembly. It is enough to unscrew the six screws from the inside, after which, from the front side, remove the plastic platband from the latches, which holds the glass on the door and to which the door handle is also attached.

How to open a Broken washing machine door handle Open using a shoe lace

If you managed to open the hatch, you still need to determine the cause of the blocking. It is possible that electricity just turned off. Another common reason is that water remained in the car, so the hatch is blocked. This is already a problem with the drain, which is described in the article “Why is the Bosch washing washing machine does not drain water?””. It happens that the function “without plum” is included, which individual models have.

  • The handle broke. This can be seen by the fact that the handle moves freely or dangles. This often happens with inaccurate circulation. It will take a replacement of the pen.
  • Blocking devices or electronic module damaged. In the first case, you will need the help of the master to enforce the hatch and replace the device. The signal of the hatch is given an intellectual module. If it is damaged, the specialist is firming the control board or replacing the Bosch washing machine module himself.

Typical problems

What problems can the user face when repairing the door of the washing machine? First of all, these are problems with the opening of the hatch. After all, the handle most often fails when you are trying to open the door after the end of the washing cycle.

What if you understand that you cannot extract things from the drum?

To open the door mechanically, use the following methods:

  • Take it up to it through the top or bottom of the washer. To open the latch through the top of the car, remove the top cover, twisting two screws from behind. Then push the lid in the opposite direction and set aside.
  • Tilt the case cm back a little back. So the drum will move a little to the side.
  • Put your hand to the lock and open it.

The same manipulations are carried out through the bottom of the machine. You need to remove the lower cover, if it is, and unlock the lock.

handle, door, washing, machine, indesit, broke

There is another popular method of how to act in this situation. to use the rope. Take a thin rope, take it between the door and the body. Now pull it on both sides, pulling the lock in turn. He must open.

Clearly this method was demonstrated by masters on

Step-by-step instruction

The part cannot be repaired, you will need a new handle on the washing machine to replace. Buy it in any specialized store, just name the brand and model of the washer to the seller.

We are dismantling

First of all, turn off the machine from the network and tighten the input tap to block the water. Armed with a screwdriver, get to work:

  • Put it with glass up on a flat surface.
  • Unscrew the screws that attach two parts of the door around the perimeter.
  • To squeeze plastic latches, you can use a slotted screwdriver. Go through the tool in a circle, unclenching latches.
  • Now remove the outer part, as well as glass.
  • The inside has remained in front of you.
  • To properly collect the details, take a picture of the handle on both sides.
  • Using a thin screwdriver, push the pin that holds the elements together.
  • As soon as you pull out the pin, the rest of the details can be free.

Before performing the repair of the handle of the launch of the washing machine, we will analyze what it consists of:

We install a new pen

Even if only one element of the handle is broken, it is necessary to replace the entire mechanism. Adhere to the assembly order:

Step 2

In our articles, we have repeatedly mentioned when discussing various breakdowns that there are always several reasons for the breakdown of the automatic locking system of the hatch. In our situation, there can also be a lot of reasons with the hatch blocking, but there is no sense in disassembling at all, so we focus on the main reasons.

Step 3

The first reason is a malfunction of the electronic unit in your washing machine.

If the problem has arisen in an electronic module, then the situation can be corrected by clicking fingers. To do this, you just need to restart this module, that is, turn off the washing machine from the power supply and connect again. If this does not help, then try to choose the fastest and simplest washing mode and wait until the machine finishes the process. If the problem did not solve after that, then most likely the problem is more serious and the help of a qualified master will be required, who can help eliminate it.

Step-by-step instruction

The part cannot be repaired, you will need a new handle on the washing machine to replace. Buy it in any specialized store, just name the brand and model of the washer to the seller.

Frigidaire Washer Repair. How to Replace the Door Lock and Switch Assembly (Frigidaire # 131763256)

We are dismantling

First of all, turn off the machine from the network and tighten the input tap to block the water. Armed with a screwdriver, get to work:

handle, door, washing, machine, indesit, broke
  • Put it with glass up on a flat surface.
  • Unscrew the screws that attach two parts of the door around the perimeter.
  • To squeeze plastic latches, you can use a slotted screwdriver. Go through the tool in a circle, unclenching latches.
  • Now remove the outer part, as well as glass.
  • The inside has remained in front of you.
  • To properly collect the details, take a picture of the handle on both sides.
  • Using a thin screwdriver, push the pin that holds the elements together.
  • As soon as you pull out the pin, the rest of the details can be free.

Before performing the repair of the handle of the launch of the washing machine, we will analyze what it consists of:

Install a new element

We will sign the algorithm in detail, which will allow you to independently install a new door handle.

handle, door, washing, machine, indesit, broke
  • Start installation from the spring, place it in the right place.
  • Next, go to the latch, install it from the side. Hold the element and enter the pin into one eye of the spring.
  • Install a plastic handle on the latch, and then push the pin to the final state.
  • It remains only to assemble the door: get the glass under the handle, install the upper part on it (do not forget to press the latches). Attach the door to the washing machine.

As you can notice, replacing a broken handle on a washing machine is not the same and a complex operation. anyone can perform it. If you have any problems, you can always turn to our masters for qualified help.

How to open the brow door on your own

Before starting the repair of the LG, Samsung, Bosch, Indesit car, you need to open the hatch door. Take a look, perhaps water remained in the drum. then drain it.

  • Disconnect the washing machine from the mains.
  • Open a small hatch under the front panel of the car. To do this, use a flat screwdriver to loosen the latches.
  • Prepare the container and drain the water by twisting the filter.

If your lump is missing, then you can get to the hatch of the hatch from below.

Previously drain the water from the doster, so that when the case is tilted, it does not result in the control module.

Then reject the body back and stick your hand from below to open the door of the washing machine.

Checking the door handle

After the opening, inspect and pull the handle. If it moves too free, then it is broken. You can replace the handle yourself by removing the door with glass from the body. Pre.buy replacement replacement.

Inspection of the castle ub

First you need to externally inspect the lock and wiring. To do this, unscrew two mounting screws on the hatch. Then bend the cuff and remove the metal clamp. Running your hand to the case, take out the lock.

  • Inspect the wiring of ub. If the burnt parts are visible, replace it. In this case, UBB loses contact with the control board.
  • The castle itself is checked by a multimeter. By applying the probes to the UBB contacts, measure the resistance.
  • If there are no indicators on the screen, the lock needs to be changed.

If you are faced with the fact that the hatch does not open for a long time after washing, do not be alarmed. The situation can be dealt with yourself. Regardless of the washing brand (Siemens, Candy, Zanussi, Ariston, Gorenje), in models with front loading the replacement of the lock is performed the same.

Follow our recommendations to quickly open the door of the washing machine and continue the wash.

Cautions

In the case when the door of the washing machine is blocked, there may be a desire to open it as quickly as possible. At this stage, serious injuries of technology are possible.

To avoid them, you should remember a number of prohibitions:

  • If the hatch is blocked, then you can’t pull and pull the handle with force. A threat of hatch damage is created.
  • You should not try to open the door using rough strength using a crowbar, a large screwdriver or another rough tool. Such unjustified actions can lead to a hatch breakdown, cuff damage and deformation of the machine itself.
  • If there are doubts about the serviceability of the door mechanism, they should take care of. The malfunction should not be left “for later”.
  • Do not try to open the door to drain from the water machine.

A lot of important and useful information about the repair of Indesit washing machines is presented in this section.

Preventive measures

Most consumers with a breakdown of the handle of the hatch in the washing machine do not face at all. If there is no factory marriage, and all the operating standards of washing equipment are observed, the part serves as faith and the truth for years.

In order not to face such breakdowns in the future, you should adhere to the following prevention measures:

  • When opening the door of the washing machine for laying linen or its extraction, the door cannot be allowed to hit extraneous objects.
  • When opening/closing the hatch, force should not be used.
  • The laundry sent to the washing should easily fit into the drum. without stuffing and pressing.
  • If the washing machine does not open after washing, then to open the door, it should not be picked up with sharp objects or try to press even more on the handle. To solve the problem, there are other, safer, methods.
  • If the handle does not work stably, it is better to immediately figure out what is the matter, without waiting for it to completely jamming it.
  • The washing machine should be protected from childish pranks and curiosity of pets.

Repair Indesit WS 84 TX. Luke’s pen replacement

The handle of the hatch of the washing machine is almost the key to clean contents. And how insulting when the key is in the hands, and the contents are still inaccessible. Now we will consider a classic case when it is required to replace the handle of the hatch with Indesit WS 84TX

The broken handle is clearly visible in the first picture, but I give you a good opportunity to make a breakdown properly. It is very easy to open the hatch, press the screwdriver in the indicated place and the door will open.

So that manipulations with the hatch are quite simple, the hatch must be removed.

handle, door, washing, machine, indesit, broke

Put the hatch as in the photo and twist all the screws around the perimeter.

Then take the screwdriver and start to push the edges of the hatch up along its entire length.

If you did everything correctly, you should open the following picture.

Remove the glass, before that, do not forget to remember how it stood. Turn the hatch after which with a thin screwdriver, push the left edge of the metal rod to the right.

Then turn the hatch over again and pull the ending end until the entire rod goes outside.

If you think that the most difficult thing is behind, I hurry to disappoint you, the difficulties are just beginning. Collect the structure with the new handle of the hatch, as indicated in the last photo and put the rod in the starting position, it is advisable to lubricate the metal with solidol before that.

To achieve a high.quality, quick result, we recommend that you contact the specialists of the Bison company. The master will come to you, install the part. As a result of this operation, you can again use your technique. We use high.quality expenditures and materials. The cost of the service is low. You can clarify the price with our employees.

Typical malfunctions

Before you start repairing, study the structure of the door, the features of its fastening. What problems happen:

  • Glass bursts.
  • The latch does not work or on the contrary shows.
  • Rinses on the loop breaks.
  • Luke lock device does not work (UBB).

If the damage is mechanical, you can perform repairs yourself. But it happens that the failure happens in the control unit. then the door is also not blocked. It is better to entrust the diagnosis and repair of the unit to a professional.

Elimination of damage

Immediately prepare the necessary tools and materials:

Repair ub

After washing, you can’t open the hatch? Perhaps the castle of UBB has broken. Since it works from electronics, check if the light has been turned off in the apartment. In this case, the door will remain locked.

The principle of operation UBB is simple: the control module supplies an electric current to the lock plates. Heated, they bend and put pressure on the latch that snaps up the hatch.

How to understand that the device has broken? By these signs:

To make sure that the problem is in the device, not control, you need to diagnose a multimeter.

  • Attach the tester’s probes to the contacts “Neutral” and “Castle Phase”.
  • Measure the indicators.
  • Everything works if three digits are shown on the screen.
  • Then attach the probes to the contacts “Neutral” and “General”.
  • Zeros or unit on the screen indicate a breakdown.

To open the door when blocking, you can use the method proposed by our users. Take a thin ribbon, pride it between the casing of the SMA and the hatch. Clutching the ends on both sides, pull the braid over yourself. After the opening, you can start repairing.

  • Move the cuff.
  • Using a screwdriver, remove the clamp. If it is plastic, disconnect the latch.
  • Unscrew the bolts that hold the device.
  • Take the cuff inside and take out the lock.
  • Disconnect the wiring.

Replacing the latch

Over time, the latch lever is deformed, irregularities appear on it, which interfere with normal closure. To make a replacement, you need to know how to remove the door:

  • Remove the clamp and rubber cuff. If there is no desire to completely remove it, bend and season it inside.
  • On the side you will see door mounts.
  • Unscrew two screws.
  • Raise the hatch up and remove from the seat.

To return the latch to the latch, you need a file. stiffen and bumps and bumps. Lubricate the details with graphite lubrication for better work. Fix the door in the same place.

The reason for the loose closure of the drum may be sagging loops, weakened mounts. When installing the hatch in place, you need to adjust its position so that the latch normally enters the hole.

Glass replacement

It’s good if you can replace the glass in your Human Glass model, but such luck rarely falls. Otherwise, you will have to close the cracks.

  • On the outside, you need to attach a plastic film with tape. It is important that there are no cracks.
  • Put the reinforcing tape on the damaged part.
  • In a separate vessel, prepare a solution of epoxy resin.
  • Pour the slot with a solution.
  • After 24 hours, remove the film. Remove the flow with sandpaper.

How to make tar? So that the product has good stickiness and resistance to temperature changes, hardener is added to the composition. You can prepare a solution based on EDP glue:

  • Take 6 parts of the resin and 4 parts of the hardener.
  • Mix in a separate container until a homogeneous mass.
  • If it turned out too thick, warm it a little in a water bath.

Carefully read the instructions before breeding: an error in the relationship will affect the quality of the resin.

In some cases, you can use a special sealant, although it will not last as long.

Adjustment or replacement of plastic support

To do this, remove the door, disassemble the handle and repair the support.

  • Remove the hatch. Put it on a flat surface.
  • Remove the mounts around the perimeter.
  • Remove the upper part and glass.
  • Now you can remove and replace the handle in case of breakdown.
  • Remove the renewal support, drill a hole with a diameter of 3.8 mm in it.
  • Cut a nail on the desired length. Heat it and pass it into the hole.
  • Wait until it has cooled for 2-3 minutes.

To avoid breakdown of a pen or other elements, you do not need to strongly pull it when opening. Also close the hatch carefully, do not clap the door. Otherwise, the elements will quickly worn and break down.

Now you know how to carry out your own repairs. Follow the operating rules and study the instructions before turning on. Then the technique will last many years.

| Denial of responsibility | Contacts |RSS