The induction stove makes a sound when it’s on

Why showing EO error in prestige induction 20.0 cooktop??��

Why is the induction hob humming??

Loud hum occurs when the induction coil and the bottom of the cookware interact. If you put a cookware with a wet bottom on the induction hob, the crackling and humming will increase. If the sound accompanies the operation of the oven, its source is most likely the fan.

An induction hob can hum if the cookware has a thin bottom or the power has been made excessive for this type of cookware. If on the burner put a container with a diameter smaller than the diameter of the burner or the bottom of the same pan is multi-layered, the hum can also be.

A sound occurs in operation

If an electric stove of conventional design hums, it indicates a deviation from normal operating protocol or even a breakdown. When running, the noise can come from different areas of the appliance:

  • From the burner. Under each burner is a heating element. If moisture, grease or other debris gets on the contact of the heating element, it oxidizes or deforms, and that’s where the humming occurs. Also the metal part of the heating element itself due to the constant heating and cooling could be loose. Then the noise effect occurs due to the large amplitude of vibration of the material. This is the case with Hansa and Indesit appliances.
  • From the oven. There are also heating elements in the oven of an electric stove, usually larger but not as powerful as under the burner. The upper and side heaters are usually not covered, that is why they can get fat drops and condensate from food and clog the part. Also in the oven is a fan, which should disperse the air around the chamber and balance the temperature. If one of the blades is bent or the cooler motor is damaged, a loud humming noise may come from it. Do not ignore it: if this part does not work properly, it consumes unnecessary energy and wears out the entire mechanism. Also, a humming noise in the oven could indicate a broken thermostat. temperature sensor.
  • From the back of the oven. If you hear a steady hum coming from the back of the stove while it’s on, it indicates a damaged wiring or power cord. Turn off the power and call the master.

Induction stovetop buzzes when induction stove is in operation

An induction cooktop should generally make a buzzing noise?

Why the induction hob buzzes?

induction, stove, makes, sound

It’s normal if the induction stove hums?

induction, stove, makes, sound

Induction stoves hum, buzz, whistle and it’s normal.

That is, it should be, the sound is made by the induction coils when they interact with the cookware.

Another thing is that the level of those same sounds may be different, that is, some models are noisy, others are less noisy.

induction, stove, makes, sound

And in general cooking is not a quiet process, the noise of induction hob is difficult to relate to its disadvantages.

To minimize the noise, it’s better to buy special cookware for induction stoves.

For example, if you set the power of the stove correctly, taking into account the thickness of the cookware walls (bottom in particular) and the size of the cookware, the noise will be many times less.

For example you set a high power, or place a cookware with a thin bottom on the stove, and as a result you hear buzzing, whistling, or adjust the power, or use a different cookware.

Or too small dishes placed on a large burner, the stove will also make noise.

Or the bottom of the cookware is layered, there is a hum from the vibration.

95% of knitting problems with noisy induction stove, it’s not the right cookware, the hum of a working stove is a normal phenomenon, the stove is fine.

To a greater or lesser extent, the induction stoves of the vast majority of manufacturers and models hum. Usually out of the sound of induction coils, which are the main source of sound, is on the spectrum of frequencies inaudible to humans. But with increasing power, the hum becomes audible and sometimes intrusive and unpleasant.

Manufacturers have been struggling with this flaw for a long time, and quite successfully.

The quality of cookware plays a leading role in the extraction of this sound. Not the flatness of the bottom contributes to more hum, as well as the thickness of the bottom (the thinner, the stronger the hum) and the empty dishes will also whistle. Buying a cookware with a perfectly flat bottom and matched thickness, almost completely eliminates noise.

Answer: Yes, for an induction cooktop, a slight audible hum is normal and assumed by the manufacturer. It is not a fault or a defect of the product.

By the way, in the manuals for induction stoves, the manufacturer gives space to explain this effect as well. Read the instructions carefully before use.

Induction stoves are in high demand abroad, but the Russian market still treats them with caution. Is it justified? We’ve already dispelled five popular myths that stop you before buying, “Induction cooktop: 5 myths”. However, induction has objective disadvantages and advantages, which we will talk about in this article. Let your choice of stove be the right one!

Why the stove makes a clicking sound

All induction panels operate on magnetic field energy. At the base is a copper coil to which energy is supplied. It’s coated with a sheet of glass ceramic. The eddy current flows through it to the bottom of the cookware and heats it, not the surface of the tile. There are several components in the design of electric induction appliances that may click when in operation:

  • Impulse controller. Electric induction technology enables you to control the cooking temperature down to the degree. But it’s hard to achieve this precision when you consider the heat on the cookware, which is why this appliance features a pulse-periodic mode. For example, if the system is set to “low flame” (power 2-3), the temperature is maintained by turning the appliance off from overheating and on again with the control. The user in this case will notice that the appliance runs jerkily, and will hear a clicking sound every 3-7 seconds. If you have set it to pulse mode, it is normal to hear a clicking noise.
  • Cooling fan. The plate itself is not heated, but the high temperature from the bottom of the pot or pan through the hob is also transferred to it. In order to maintain the temperature mode and maintain the serviceability of the most important part, a fan is installed, which cools the plate during operation. In many models, it rotates while the stove is on and for a few more seconds after it is turned off.

If from the first day of use the device clicks and works, especially on the weak heating modes, you should not worry. But if the sound has become louder, or if there is a new crackling, grinding, or clicking noise, some part may have malfunctioned.

Features of the malfunction

When the induction hob clicks it’s worth paying attention to a few things. For equipment of this type is characterized by a clicking sound when heated or working at high power. If the stove clicks and runs, the relay regulates the power. There is also a sound when the heat level is reduced. In other cases, snapping is due to the presence of malfunctions arising from the following reasons:

  • Factory defect. Parts break during the warranty period. often in the first 1-3 months of active use. Repairs are inexpensive or under warranty from the manufacturer.
  • Natural wear and tear. Relay failed due to prolonged use. Relay needs to be replaced with a new one.
  • Improper use, care. Violation of the rules of use, cleaning, washing and other manipulation. We recommend to study the instructions of the equipment supplied with the purchase. If you have lost the brochure you can find it on the manufacturer’s official website.

The source of the sound

Despite the fact that the kitchen by definition can not be the quietest room in the apartment, the creators of kitchen appliances have always tried to make their devices as “silent” as possible. But sometimes negligent operation or a factory defect can cause various malfunctions of the stove. A direct consequence of these irregularities can be a deafening sound, remotely resembling the hum of the turbines of an airplane flying above you.

If you have a humming electric stove, familiarize yourself with the main causes of various unpleasant sounds:

Booster” function, as a rule, forces the heating elements to work in forced load mode, so you shouldn’t be surprised to hear more noise;

The burner may be clogged or deformed. Such damage is usually fraught with crackling due to vibrations on the surface;

induction, stove, makes, sound

Large metal parts of the housing expand when warmed and contract when cooled. This process may be accompanied by a soft crackle or the sound of bending of the metal sheet;

The tubular electric heater (TEN), which is the main heating element of electric stoves, can become loose and hum as the vibrations it creates enter into a wider amplitude;

If the sound comes from the oven, it could be due to the fan, which is involved in convection;

The fan that cools the front panel may move off the axis or even lose a blade, the consequence of which will be the appearance of rattling;

Sometimes the noise is caused by the interaction of magnetic coils and the material of which the cookware is made. The loudness of the hum depends on the thickness of the walls, the features of the material from which the cookware is made, the smoothness of its bottom, the weight and the tightness of the surface;

If the induction unit is operated with a wet bottom of the cookware, crackling (or whistling) is inevitable.

The price of a question

Many people were scared away by the price of a new product that appeared on the market. But against the background of that rose during the crisis, the difference in the cost of conventional electric stoves and induction stoves is not so noticeable. Of course, the price depends on the functionality, so you can simply abandon the extra features in favor of induction technology.

The most popular are induction hobs Bosch. We have monitored many sites and realized that they have the largest number of positive reviews. The second most popular brand is Electrolux. If you compare the cost of these two brands, it’s almost the same.

Professional repair of electric stoves

If there is any hum, atypical noise during the operation of the stove, you must first determine the source of its occurrence. If it is due to the use of improper cookware or other easily eliminated factors, you need to eliminate them. But if the source of the noise you have failed to identify or the stove requires repair, you need to turn to the professionals.

Repair in the service workshop “Polite Service 5” is guaranteed to provide you:

Noisy induction sound. Is this normal?

  • The repair at Polite Service 5 service shop is guaranteed to provide you:
  • Using only original spare parts when repairing.
  • High-quality repair of any complexity in a single visit to the masters.
  • Official warranty.
  • Best prices.

You can call the master by phone or by filling out a request form on the site. Open daily from 7:00 to 23:00, no weekends and breaks.

Professional assistance from Remontano

The personnel of Rémontano knows about all the shortcomings and faults of your appliances at first hand. Daily incoming requests and positive feedback from our clients show the result of productive work of the whole company staff.

Individuals, entrepreneurs and large companies use our services. Quality of service is emphasized. Technique repair is made at home at any time convenient for customers. The hours for a master visit are agreed upon in advance.

To order repair of induction technique is offered on or on a site. The specialists of the center are ready to repair any model of stove, regardless of year of manufacture and assembly type. We are waiting for your calls from 7:00 to 23:00, seven days a week!

| Denial of responsibility | Contacts |RSS