The machine does not heat water when washing Bosch. Non -working press stratum

The washing machine does not warm the water, how to fix it

As practice shows, the main reason for insufficient heating is the scale on the electric heater due to the low quality and hardness of the water. In good condition, washing machines can heat water to 95 ° C, but sometimes users notice problems with heating. over, the Bosch chiteling machine can behave differently: stop in 10-15 minutes or continue to work in “cold” mode. The latter is typical. First, it is better to check if there are really problems or are it subjective sensations.

  • Touch the hatch. After rinsing and drying, linen is cold, so this should not be misleading. Therefore, for checking you need to touch the hatch 20-30 minutes after the start of the cycle. Bosch washing machine glass should be warm and even hot, so be careful!
  • Check the connection. The washing machine should cyclically type and drain water with regularity, which depends on the installed program. If the washer constantly picks up water and merges, then she simply does not have time to warm up. This happens when the sewage system is incorrect, so you need to check the installation.
  • Set the correct mode. It is possible that after a delicate washing performed at 30 ° C, the regime was not translated. In individual models of Bosch washing machines, the choice of program and temperature is performed by different switches. Water will not heat up if, for example, the temperature regime is selected 95 ° C, and in the program it is set up to 60 ° C. The machine will focus on the program.

What has broken if the water does not heat up?

In the event that you have no time to repair the Bosch machine, and you need to wash the accumulated mountain of linen now, we offer an original way out. Immediately make a reservation that it is better not to operate a faulty machine for a long time and fix it as soon as possible. So, how to wash the linen with a qualitatively if the machine refuses to warm water?

  • First we determine at what temperature we will wash things. We set the indicated temperature on the home water heater (for example, 600C) and wait until the water is heating.
  • We approach the washing machine and block the supply of cold water into it. Open the powder receiver, pour powder into it and put the watering can in it.
  • We put dirty underwear in the washing machine, close the hatch door, turn on the machine and set the washing program.
  • We immediately turn on hot water, which through the watering can begins to flow into the powder receiver, washing off the powder into the tank of the washing machine.
  • We are waiting for the water to get and observe the behavior of the washing machine. As soon as there is enough water, the machine starts washing, at this time we must turn off hot water, remove the watering can from the tray and push the powder receiver to the place.
  • We open the previously blocked tap for supplying cold water and you can safely leave the bathroom. Further, the washing machine will finish the washing itself, salt soap water, rolls water for rinsing, rinse the laundry, and then squeezes it. All this will be done without your participation.

As you have already noticed, this method is suitable not only for those who have hot water. If you have only a cold water supply in your house, you can heat two buckets of hot water and gradually pour this water through the powder receiver into the tank of the washing machine. The effect will be exactly the same.

Interesting:

  • Which Bosch washing machine is better to buy
  • Electrolux washing machine does not warm water
  • How to repair a Bosch washing machine
  • Errors of dishwashers Miles
  • Review of built.in dishwashers Bosch 45 cm
  • Review of built.in dishwashers Bosch 60 cm

“If there is no blockage, it is necessary to check the resistance of the coil of the press start”. And that’s it? And where is the check description? What is the resistance of the coil?

How to check the press.steamstress, how it affects the ON/Off of Ten?

Pressostat has mainly only contacts! Yes, there are still electronic ones, but you can’t just check them out.

How to check whether the washing machine warms water

The situation may happen when the washing unit completely worked out all the stages of washing, but the laundry was well ground, although the same washing was used. One of the reasons may be non.compliance with the temperature regime. In other words, the car erased linen in cold water. In this case, it is worth checking whether the water entered the washing drum is heated.

To do this, you need to select one of the washing modes, which provides for water heating to a temperature of 50-60C and 20-30 minutes after it starts, touch the glass of the loading hatch. In machines with the upper load, put your palm on the top cover. If these elements are warm. water heats up, if cold. the washing unit is faulty. Having completed the washing, it is necessary to identify the reasons for the failure in work, and eliminate the malfunction. Further operation of the washing machine will not only not lead to the desired result when washing, but can also completely bring it into disrepair.

Reasons why the washing machine does not heat water

The washing unit is a complex household device consisting of many elements. The reason for the lack of water heating may be a failure or breakdown:

Washing Machine not Filling with water. How to diagnose the problem & test valves pressure switche

  • heating element (Ten);
  • water heating sensor (thermostat);
  • programmer (electronic unit);
  • water level sensor in the tank (press start).

Also, water may not heat up enough with:

  • improper connection of the washing unit to the drain system, as a result of which the heated water caused by a siphon effect occurs;
  • the wrong selection of the washing program in which the selected mode in favor of a higher temperature regime is ignored.

The reasons why the machine does not warm the water quite a lot, so in order to find out the source of the malfunction, it is necessary to go on the principle of “from simple to complex”.

Independent diagnosis and elimination of problems

The initial diagnosis can be carried out without calling the master. to identify what the reason is, check the details that we talked about above. We need both visual and technical inspection.

  • Inspect the sensor that controls the water level in the tank. Pressostat, or rather its tube, is filled with hair and small garbage. You can determine the clogging visually, just looking inside the tube. To get to the hose, you will need to remove the upper or side panel of the machine.
  • Checking the wires of parts. Most often, the wiring coming from the heater breaks off, but to guarantee, inspect all the wires inside the washing room. Perhaps some of them frayed, they need to be soldered and insulated with island.
  • Checking and inspection of Ten. Ten is checked by a special device. multimeter. To begin with, it is measured by its original resistance without inclusion in the network, then heated, measure and compare the obtained numbers. If the indicators are practically no different, the detail is faulty. It also happens that a whole and unharmed heating element is preserved under a layer of scale. details in our article:
  • Diagnosis of thermostat. If the heater, the press start and wiring is normal, but the water is still warming up, check the temperature sensor with a multimeter (in modern machines. thermistor). As a rule, the sensor is similar to a small metal cylinder, to which the wires are brought.

Prevention and tips

So that the machine does not fail in the future, follow these rules:

  • If you know that dirty water is coming from the water supply, add softening agents;
  • regularly, once every couple of months, clean the machine with citric acid or vinegar;
  • Explore and clean the pipe of the press starting periodically;
  • Clean the filter regularly.

This will be enough for the water in the tank to always heat up to a given temperature program.

Bosch washer diagnosis, ways to eliminate malfunctions in work

The lack of heating with the correct selection of the Bosch program and settings always indicates a breakdown. To clarify the state of the nodes, the washing room will need to be partially disassembled. But first, the device needs to be turned off from communications: be sure to pull the fork out of the outlet and close the crane that supplies water to the washing machine.

Ten burned

The failure of the heater is the most common error in statistics, which leads to problems with heating water. The tubular electric heating element is located under the Bosch washing machine. Access to the node is carried out with the front panel removed.

To analyze the condition of the part, a multimeter is used, and a visual inspection is carried out. The details that have become unusable are changed to a new. Details. in this article.

Damage to the thermostat

When the temperature sensor fails, the Bosch washing machine cannot determine whether there was heating or not. Is located a thermal attemptor on the heater. The performance of the element is checked by a multimeter. A broken part needs to be replaced.

Controls in the control module

The control unit controls the operation of the Bosch washing machine and coordinates the inclusion of nodes.

When burning certain elements on the board, signals associated with heating water are not received or accepted. As a result, heating does not occur.

Solving the problem. Module repair. Access to it is made with the upper cover removed and the upper control panel.

Repair of the control module is a difficult task that requires knowledge in electronics and special equipment, so it is more correct to entrust it to a specialist.

Wiring disturbances

In the Bosch washing machine, the main nodes are connected by electric wires, along which signals from the control unit and to it are passed. In case of violation of contacts, a break in the wires and a whole train, the information ceases to pass. Such a breakdown can lead to a lack of water heating, as well as to other failures.

Solution of the issue. replacement of wiring, execution of twist, consolidation of contacts. Work of this nature is carried out with a disassembled body of the washing machine.

Water level sensor

If water does not heat up in the Bosch machine, then one of the possible reasons may be a breakdown of the water level sensor. This element of the washer is not directly connected with heating, but when it fails, water may not heat up.

Where to find a sensor, and how to remove it. on

Supported lineup of Bosch washing machines

See the list of models below:

The Maxx 4 series includes two common modifications. Speed ​​Edition and Speed ​​Perfect.

2062 OE, WFC 1664 OE, WFC 1666 OE, WFC 1665 OE, WFC 1667 OE, WFC 2060, WFC 1262 OE, WFC 1263 OE, WFC 1600 By, WFC 1662 OE, WFC 1663 OE, WFC 2066 OE, WFC 2063 OE, WFC 2063 OE, WFC 2064 OE, WFC 2065 OE, WFC 2067 OE.

machine, does, heat, water

16180 OE, WLF 20180 OE, WLF 20181 CE, WLF 20164 OE, WLF 16060 OE, WLF 16062 By, WLF 16164 OE, WLF 20060 OE, WLF 20170 CE, WLF 20271 CE, WLF 24271 CE, WLF 16170 CE. WLF 16260 OE, WLF 16165 CE, WLF 16261 OE, WLF 20062 by, WLF 20160 OE, WLF 20171 CE, WLF 20260 OE, WLF 20261 OE.

1640 OE, WFO 1261 PL, WFO 2050 GR, WFO 1661 By, WFO 1662, WFO 2040 OE, WFO 2042 OE, WFO 2051 GR, WFO 2064, WFO 2264, WFO 2440 OE, WFO 2442 OE, WFO 2450. WFO 2451 GR, WFO 2464, WFO 2840 OE, WFO 2864, WFO 1660 By.WFR 2440, WFR 2441, WFR 2466, WFR 2830, WFR 2841, WFR 2866, WFR 3240.

2061 OE, WFH 1660 OE, WFH 2461 OE, WFH 1260 OE, WFH 1262, WFH 2060 by, WFH 2460 OE, WFH 2062 OE.

Modification of SpeedPerfect and SilenCeperfect. highlight of the Maxx5 series.

20462 OE, WLX 2048K OE, WLX 20362 OE, WLX 20364 OE, WLX 20161 OE, WLX 16163 OE, WLX 20160 OE, WLX 2036 Koe, WLX 20361 OE, WLX 20480 OE, WLX 20461 OE, WLX 20370 CE, WLX 24460 OE, WLX 24460 OE, WLX 24460 OE, WLX 24460 OE. WLX 24363 OE, WLX 20460 OE, WLX 24361 OE, WLX 24362 OE, WLX 24462 OE, WLX 24463 OE, WLX 2448 Koe, WLX 20162 OE, WLX 24163 OE, WLX 20363 OE, WLX 24364 OE, WLX 16162 OE, WLX, WLX 20463 OE, WLX 16161 OE, WLX 16160 OE, WLX 20163 OE, WLX 24461 OE, WLX 24360 OE.

24520 EU, WVD 2446 Soe, WVD 24460 OE, WVF 2400 EU, WVF 2401, WVT 1260, WVTI 2841 EU, WVIT 2842 EU, WVT 3230, WVD 24420 OE, WVTI 3240 EU, WVTI 2840 EU, WVTI 2842 EUU.

Calling the master

It is not always possible to determine the cause of the failure and repair the Bosch washing machine on their own. If there is doubt that everything will be done by yourself, it is better to contact the company for repairing household appliances.

Such companies are present in every city. Information about them can be found on the Internet, and read reviews there, study the price list and a list of services.

The price of new parts for the Bosch washing machine is paid by the customer and the cost of work is not included.

The lack of water heating in the Bosch washing machine is an unpleasant situation, but completely solved. It is possible to repair equipment even on their own. But if difficulties arose with this, then it is advisable not to delay the solution of the problem, and call the master from the profile company.

Often, during operation, a problem arises when the washing machine does not warm the water or heats it not enough. If such a malfunction occurs, most modern models with an automatic self.diagnosis system stop working and give out a malfunction code for a display. Simple units usually continue the process of washing in cold water, which may complicate the timely detection of this breakdown.

The first obvious sign of insufficient or complete absence of heating during washing is poorly worn underwear. You can check and eliminate this malfunction yourself or with the involvement of a repair master from the service center.

What has broken if the water does not heat up?

In the absence of water heating, and finding a solution to the problem, you may encounter certain difficulties:

Problem Ways to solve the problem
The washing machine is under warranty You should not open the washing housing yourself. When detecting a failure, you need to contact the service center
The new heater is not placed in the seat Most likely, a heating element that was not suitable for this model was chosen
I can’t get the heater The part is held in the seat of the central nut. In addition, Ten himself “sits” tight enough, which avoids leaks
After replacing the heater, the water in the drum still does not heat up It is necessary to check the remaining nodes that are involved in the process of heating the water. There is a chance that not only the heater turned out to be worn out

Low prices

Service Price
Diagnostics
When ordering repairs Is free
In case of refusal to repair 1 norm
Full diagnosis of the product (performance check) 2 norm-hour
Overhaul
Replacing the electric engine 1.5 norm-hour
Replacing the pulley of the drum 2 norm-hour
Replacement of shock absorbers without tank removal 1.4 norm-hour
Replacing an electric burner 2.2 norm-hour
Replacement of supports, cross 2.2 norm-hour
Drum replacement, tank 2.5 norm-hour
Replacing bearings 2.5 norm-hour
Installation of counterweights 1.3 norm-hour
Replacing corps elements 2 norm-hour
Repair of medium complexity
Sealing or replacing nozzles 1 norm
Replacing the drain pump 1.2 norm-hour
Elimination of a clip of drain pump, inaccessible pipes 1.2 norm-hour
Replacing the electromagnetic valve 1.5 norm-hour
Replacing the heater 1.5 norm-hour
Replacing the presettate 1.2 norm
Replacing the level sensor 1.1 norm-hour
Replacing the indication unit, electronic module 1.7 norm-hour
Replacement (installation-demonstration) KSMA 1 norm
Repair of an electrical circuit 2 norm-hour
Configuration (firmware) of the electronic unit 2 norm-hour
Replacing the signaling lamps of the dispenser, front panel 1 norm
Front replacement 1.1 norm-hour
Drying cleaning 1.5 norm-hour
Replacing the heater 1.5 norm-hour
Replacing the thermostat, drying timer, suspension springs, hatch lock 1.5 norm-hour
Closing the drum curtains 2.5 norm-hour
Extracting foreign objects from the tank 1.6 norm
Minor repairs
Removing transport fasteners 1 norm
Replacement of the hook, handle handle, hatch fasteners, glass 0.8 norm-hour
Replacing door seals, hatch cuffs 1.6 norm-hour
Opening the door of the loading hatch 1 norm
Replacing the power button, capacitor, network filter, network cord, repair of the KSMA pointer 0.7 norm-hour
Replacing the drain hose 1.2 norm-hour
Replacement of the water area (hydrostopia) 1.2 norm-hour
Little repair (not disassembling the car) 0.5 normal hour
Maintenance 1 norm
Related
Repair of nodes, modules 50% of the price of new
Installation-demonstration of a built-in device 1 norm
System cleaning 1 norm
Margin of margin
Building 1.8
Premium model 1.8
Urgent exit (within 15 minutes) 1.5
Cleaned working conditions 1.5
Any repair associated with complete disassembly of the product 2.5
Basic values
Normal (rounded up to half an hour) 1000
Final provisions
When carrying out the repair of the management board, the master takes the fee, after the repair returns it and sets spare parts and consumables are paid separately to the departure outside the city. 40 /km. The final price of the repair is determined by the master, based on the complexity of the breakdown and the observation of the ongoing works

See the list of models below:

The Maxx 4 series includes two common modifications. Speed ​​Edition and Speed ​​Perfect.

2062 OE, WFC 1664 OE, WFC 1666 OE, WFC 1665 OE, WFC 1667 OE, WFC 2060, WFC 1262 OE, WFC 1263 OE, WFC 1600 By, WFC 1662 OE, WFC 1663 OE, WFC 2066 OE, WFC 2063 OE, WFC 2063 OE, WFC 2064 OE, WFC 2065 OE, WFC 2067 OE.

16180 OE, WLF 20180 OE, WLF 20181 CE, WLF 20164 OE, WLF 16060 OE, WLF 16062 By, WLF 16164 OE, WLF 20060 OE, WLF 20170 CE, WLF 20271 CE, WLF 24271 CE, WLF 16170 CE. WLF 16260 OE, WLF 16165 CE, WLF 16261 OE, WLF 20062 by, WLF 20160 OE, WLF 20171 CE, WLF 20260 OE, WLF 20261 OE.

1640 OE, WFO 1261 PL, WFO 2050 GR, WFO 1661 By, WFO 1662, WFO 2040 OE, WFO 2042 OE, WFO 2051 GR, WFO 2064, WFO 2264, WFO 2440 OE, WFO 2442 OE, WFO 2450. WFO 2451 GR, WFO 2464, WFO 2840 OE, WFO 2864, WFO 1660 By.WFR 2440, WFR 2441, WFR 2466, WFR 2830, WFR 2841, WFR 2866, WFR 3240.

2061 OE, WFH 1660 OE, WFH 2461 OE, WFH 1260 OE, WFH 1262, WFH 2060 by, WFH 2460 OE, WFH 2062 OE.

Modification of SpeedPerfect and SilenCeperfect. highlight of the Maxx5 series.

20462 OE, WLX 2048K OE, WLX 20362 OE, WLX 20364 OE, WLX 20161 OE, WLX 16163 OE, WLX 20160 OE, WLX 2036 Koe, WLX 20361 OE, WLX 20480 OE, WLX 20461 OE, WLX 20370 CE, WLX 24460 OE, WLX 24460 OE, WLX 24460 OE, WLX 24460 OE. WLX 24363 OE, WLX 20460 OE, WLX 24361 OE, WLX 24362 OE, WLX 24462 OE, WLX 24463 OE, WLX 2448 Koe, WLX 20162 OE, WLX 24163 OE, WLX 20363 OE, WLX 24364 OE, WLX 16162 OE, WLX, WLX 20463 OE, WLX 16161 OE, WLX 16160 OE, WLX 20163 OE, WLX 24461 OE, WLX 24360 OE.

24520 EU, WVD 2446 Soe, WVD 24460 OE, WVF 2400 EU, WVF 2401, WVT 1260, WVTI 2841 EU, WVIT 2842 EU, WVT 3230, WVD 24420 OE, WVTI 3240 EU, WVTI 2840 EU, WVTI 2842 EUU.

2037 Koe, Wae 16160 OE, WAE 20440 OE, WAE 24160 OE, WAE 24360 OE, WAE 24440 OE, WAE 20360 OE, WAE 20370 OE, WAE 16440 OE, WAE 20160 OE OE OE.

24463 OE, WAE 24164 OE, WAE 24467 OE, WAE 24443 OE, WAE 2049 KOE, WAE 16161 OE, WAE 20161 OE, WAE 20163 OE, WAE 20164 OE, WAE 20361 OE, WAE 24441 OE, WAE 24466 OE, WAE 16442 OE. WAE 20364 OE, WAE 2047 SOE, WAE 24163 OE, WAE 24468 OE, WAE 20363 OE, WAE 16443 OE, WAE 24444 OE, WAE 24462 OE, WAE 24364 OE, WAE 16163 OE, WAE 24442 OE, WAE 28444 OE, WAE 28443 OE, WAE 28441 OE, WAE 24361 OE, WAE 20443 OE, WAE 24363 OE, WAE 20362 OE, WAE 24464 OE, WAE 20442 OE, WAE 16441 OE, WAE 20441 OE, WAE 24465 OE, WAE 2046 SOE, WaE 2044444. WAE 16444 OE, Wae 2044 Soe.

Supported lineup of Bosch washing machines

See the list of models below:

The Maxx 4 series includes two common modifications. Speed ​​Edition and Speed ​​Perfect.

WFC 2062 OE, WFC 1664 OE, WFC 1666 OE, WFC 1665 OE, WFC 1667 OE, WFC 2060, WFC 1262 OE, WFC 1263 OE, WFC 1600 By, WFC 1662 OE, WFC 1663 OE, WFC 2066 OE, WFC 2063 OE OE OE. WFC 2064 OE, WFC 2065 OE, WFC 2067 OE.

WLF 16180 OE, WLF 20180 OE, WLF 20181 CE, WLF 20164 OE, WLF 16060 OE, WLF 16062 by, WLF 16164 OE, WLF 20060 OE, WLF 20170 CE, WLF 20271 CE, WLF 20281 CE, WLF 24271 CE, WLF 161770 CE, WLF 16260 OE, WLF 16165 CE, WLF 16261 OE, WLF 20062 by, WLF 20160 OE, WLF 20171 CE, WLF 20260 OE, WLF 20261 OE.

WFO 1640 OE, WFO 1261 PL, WFO 2050 GR, WFO 1661 By, WFO 1662, WFO 2040 OE, WFO 2042 OE, WFO 2051 GR, WFO 2060 BY, WFO 2064, WFO 2264, WFO 2440 OE, WFO 2442 OE, WFO, WFO 2450, WFO 2451 GR, WFO 2464, WFO 2840 OE, WFO 2864, WFO 1660 By. WFR 2440, WFR 2441, WFR 2466, WFR 2830, WFR 2841, WFR 2866, WFR 3240.

WFH 2061 OE, WFH 1660 OE, WFH 2461 OE, WFH 1260 OE, WFH 1262, WFH 2060 by, WFH 2460 OE, WFH 2062 OE.

machine, does, heat, water

Modification SpeedPerfect and SilencePerfect. The highlight of the MAXX5 series.

WLX 20462 OE, WLX 2048K OE, WLX 20362 OE, WLX 20364 OE, WLX 20161 OE, WLX 16163 OE, WLX 20160 OE, WLX 2036 Koe, WLX 20361 OE, WLX 20480 OE, WLX 20461 OE, WLX 20370 CE, WLX 24460, WLX 24460 OE, WLX 24363 OE, WLX 20460 OE, WLX 24361 OE, WLX 24362 OE, WLX 24462 OE, WLX 24463 OE, WLX 2448 Koe, WLX 20162 OE, WLX 24163 OE, WLX 20363 OE, WLX 24364 OE, WLX 16162 OE, WLX 16162 OE, OE, OE, OE, OE, OE, WLX WLX 20463 OE, WLX 16161 OE, WLX 16160 OE, WLX 20163 OE, WLX 24461 OE, WLX 24360 OE.

WVD 24520 EU, WVD 2446 Soe, WVD 24460 OE, WVF 2400 EU, WVF 2401, WVT 1260, WVTI 2841 EU, WVIT 2842 EU, WVD 24420 OE, WVTI 3240 EU, WVTI 2840 EU, WVTI 2842 EU, WVTI 2842 EU.

Wae 2037 Koe, WaE 16160 OE, WAE 20440 OE, WAE 24160 OE, WAE 24360 OE, WAE 24440 OE, WAE 20360 OE, WAE 20370 OE, WAE 16440 OE, WAE 20160 OE OE OE.

WAE 24463 OE, WAE 24164 OE, WAE 24467 OE, WAE 24443 OE, WAE 2049 Koe, WAE 16161 OE, WAE 20161 OE, WAE 20163 OE, WAE 20164 OE, WAE 20361 OE 24441 OE, WAE 24466 OE, WaE 16442 OE, WAE 20364 OE, WAE 2047 Soe, WAE 24163 OE, WAE 24468 OE, WAE 20363 OE, WAE 16443 OE, WAE 2444 OE, WAE 24462 OE, WAE 24364 OE, WAE 16163 OE, WAE 24442 OE, WAE 28444 OE, Wae 28444444444444444444444444 OE, WAE 28444 OE, WAY WAE 28443 OE, WAE 28441 OE, WAE 24361 OE, WAE 20443 OE, WAE 24363 OE, WAE 20362 OE, WAE 24464 OE, WAE 20442 OE, WAE 16441 OE, WAE 20441 OE, WAE 24465 OE, WAE 2046 SOE, WAE 20444 OE, WAE 16444 OE, WAE 2044 Soe.

Vario Perfect translated from German means. Ideal quality. Sensitive. Sensitive washing. These two qualities combine the latest line of Bosch Logixx washing machines.

WLM 20440 OE, WLM 20441 OE, WLM 24440 OE, WLM 2445 Soe, WLM 2444 SOE, WLM 24441 OE.

WAQ 20440 OE, WAQ 24440 OE, WAQ 24460 OE, WAQ 24461 SNOE, WAQ 28440 OE, WAQ 28460 SNOE. (Avantixx)

WAS 20443 OE, WAS 2474 GOE, WAS 24740 OE, WAS 2044 GOE, WAS 2875 BOE, WAS 24440 OE, WAS 24442 OE, WAS 24741 OE, WAS 28743 OE, WAS 20440 OE, WAS 24742 OE, WAS 24743 OE, WAS 28740 OE, WAS 28741 OE, WAS 24443 OE, WAS 2876 BOE, WAS 24441 OE, WAS 28742 OE, WAS 20442 OE, WAS 20441 OE, WAS 28750 OE.

We serve professional machines WBB 24751 EU and WBB 24750 EU.

WOT 24552 OE, WOP 2050, Wol 2050 EU, Wot 20351 OE, Wor 16153 OE, WOT 20152, WOF 1800, Wor 20150 OE, WOT 16152, WOT 20350 OE, Wor 16150 OE, Wok 2031, Wol 2051, WOP 2051, Wor 20152 OE, WOT 24550 OE, WOT 24551 OE, WOT 26483 OE, Wor 20151 OE, Wor 20153 OE, WOT 20352 OE, Wol 2200, Wor 16152 OE, Wol 1650 EU, Wol 1670 EU.

WAN 24060, WAN 20060, WAN 28290, WAN 24260, WAN 24140, WAN 2416 S, WAN 20160, WAN 24290.

WLN 24242, WLN 24261, WLN 24260, WLN 24262, WLN 24241, WLN 24240, WLN 2426 E, WLN 2424 Z, WLN 2426 m.

WAT 28541, WAT 24442, WAT 28740, WAT 20441, WAT 24440, WAT 24441.

Way 32742, Way 24742, Way 28742, Way 3272 m.

WLT 24460, WLT 24560, WLT 24440, WLT 24540.

WAW 28740, WAW 32540, WAW 28540, WAW 24440, WAW 28440, WAW 32590.

WAA 12161, WAA 16160 OE, WAA 16161 OE, WAA 16162 OE, WAA 16163 OE, WAA 16170 CE, WAA 16171 CE, WAA 16260 OE, WAA 16261 OE, WAA 2016 Koe 2016 soe, WAA 20160 OE, WAA 20161 WAA 20162 by, WAA 20163 by, WAA 20170 CE, WAA 20171 CE, WAA 20180 OE, WAA 20181 CE, WAA 2026 Soe, WAA 20260 OE, WAA 20261 OE, WAA 20262, WAA 20263 OE, WAA 20270 CE, WAA 20271 CE, WAA 20272 CE, WAA 24160 OE, WAA 24162, WAA 24163, WAA 2427 SCE, WAA 24270 OE, WAA 24271 CE, WAA 24272 CE, WAA 2428 SCE.

WLF 16180 OE, WLF 20180 OE, WLF 20181 CE, WLF 20164 OE, WLF 16060 OE, WLF 16062 by, WLF 16164 OE, WLF 20060 OE, WLF 20170 CE, WLF 20271 CE, WLF 20281 CE, WLF 24271 CE, WLF 161770 CE, WLF 16260 OE, WLF 16165 CE, WLF 16261 OE, WLF 20062 by, WLF 20160 OE, WLF 20171 CE, WLF 20260 OE, WLF 20261 OE.

WFXI 2840 EU, WFB 2001 by, WFE 2021 EU, WFT 2830, WFK 2431, WFW 3231, WFG 242L GB, WFB 3200, WFB 4001, WFG 2060 By, WFG 2070, WFX 2440 OE, WFD 2060 BY, WFD 1660 BY, WFD 1660 BY, WFD 1660 BY, WFO 1607, WFD 2090 EU, WFF 1201, WFG 2420 GB, WFT 2806, WFX 2840 OE, WFXI 2842 EU, WFG 2220, WFB 4800 GB, WFD 1060, WFG 2020 GB, WFK 2831, WFP 1605 BY, WFF, WFF 1401, WFP 3231, WFW 2831.

Our service center serves any Bosch washing machines. All spare parts are new and original.

Ten malfunction in Bosch washing machine

Ten. A heating element designed to heat water to the temperature washing necessary for the program. These heating elements consist of tubes filled with a heat insulator.

The characteristic features in which you can independently determine the malfunction are a long washing cycle, or the cold glass of the hatch door.

If the Bosch washing machine erases for a long time, this is a clear sign of a faulty heating element. The thing is that with certain set washing parameters with a software module, a temperature sensor that must track the temperature gives a signal that the water is cold. And for this reason, the washing process does not end.

Either time or hard water can bring into disrepair. On behalf of the Bosch service center, we do not recommend using Calgon (Calgon) and other means of this type, to remove the scale. After all, it is hard water that leads to the formation of a large number of scenes.

Possible causes and ways to eliminate them

The parameters of temperature and washing programs are incorrectly exhibited incorrectly

The value set by the temperature regulator does not correspond to the chosen washing mode

Switch the temperature and washing regimen regulators to the relevant provisions according to the instructions

Self-melting hot water due to the siphon effect as a result of improper connection of the machine to the sewage system

During operation, the drain hose remains constantly warm or hot

Eliminate the siphon effect, correctly connecting the drain hose. If necessary, put a check valve into a drain system.

The wires or their insulation were damaged, connecting contacts were oxidized

Conduct a visual inspection of the wiring and contacts, check the tester for a cliff and short circuit

Restore the electrical wire and their insulation, clean contacts

Bad heating due to the formation of a large layer of scale on the heater

Check the heater by the tester, with its serviceability, get the heater and inspect it

Clean the heater from the scale mechanically and using a solution of citric acid

Check the heater by the tester for cliff and short circuit, the resistance between contacts should be within 20-40 Ohms

When identifying defects, replace the heater with a new. How to replace the heating element

The water level sensor is faulty (Pressostat)

Clean the receiving tube of the sensor from the crammed garbage.

The temperature sensor is faulty (thermostat)

Call the tester the electric chapter of the sensor for the cliff and short circuit

Restore electrical connections, a non.working sensor to replace (how to do it)

The electronic control unit (ECU) is faulty

The signal for the inclusion of the heater when all other components is not issued

Repair the computer in a specialized workshop or change it with a working one (how to replace the module)

Most of the malfunctions can be detected and eliminated independently, but in some cases you can not do without contacting the service center.

As practice shows, the most common malfunction in the absence of heating in the washing machine is the failure of the heating water due to the formation of a large layer of scale. To avoid this, it is necessary to add softening agents when washing (kalgon, antinagipine, etc.P.). On the incoming pipeline, a special filter for technical cleaning of water will be desirable. Periodically (once every 3-4 months), it is necessary to clean the internal parts of the machine from the scale with a solution of citric acid or other similar means.

Such preventive measures will extend the service life of the washing machine and avoid the need for its frequent repair.

If you decide to repair yourself, we offer the best range of spare parts for washing machines.

How to remove and clean filter on Bosch Washing Machine & keep it Hygienically Fresh

The washing machine does not warm the water, the causes and ways to eliminate the breakdown

The washing machine does not warm the water when washing. This problem is quite common, and the reasons why there is no water heating a lot. It is very important to eliminate this problem, because for washing various types of linen, a certain temperature is required.

Each housewife is known to achieve a better washing result, you should choose the desired temperature regime. For this, there is a special tag on things that indicate a point or digital value of the recommended temperature. If wool products are erased in cold water, then bedding or towels are erased in water heated to a certain temperature. But what to do if the washing machine does not warm the water? This article will describe and disassemble the main reasons for this malfunction, as well as ways to solve them.

How to identify a faulty element

When warm water is periodically drained, the siphon effect is eliminated correctly by connecting the machine for washing to the drain system. This is done by installing a check valve.

If the water does not heat up at all, then the rear or side panels are removed to check the connection of the heating device with the wiring.

An anneal regime exposes all the details of washing equipment to special loads. This leads to the separation of the elements.

Diagnosis of Ten

Damage of the tubular electric heater is the most common reason when the machine is erasing with cold water. In good conditions, Tenn has been working for 5 years or more. But the presence of hard water, low.quality detergents, non.compliance with operational conditions lead to the occurrence of scale. The result is the overheating and burnout of the heater.

Smarts are equipped with wet type electric heaters, with a capacity of 1.5 to 2.5 kW. It is indicated on the body of washing equipment or operational documentation. To diagnose the performance of the heater, you need a tester.

  • Disconnect wire terminals from an electric heater.
  • Put the tester into measuring mode up to 1000 Ohms.
  • Touch the multimeter electrophores to Ten contacts.

If the multimeter shows “0”, this means that there was a short circuit inside the electric heater. “1” or infinity speaks of a cliff. Both cases require replacement.

A breakdown on the case is checked by the testers in the “Zummer” mode. One probe is connected to the heater, the other to the housing of the electric heater. If there is no sound, there is no problem. With the sound signal, the heater should be replaced.

Diagnosis of temperature sensor

When the test test showed good work, you should pay attention to the temperature sensor.

machine, does, heat, water

A small metal cylinder is located in the electric heater housing.

  • Disconnect the electrical wiring and carefully remove.
  • The multimeter measure its resistance. The device is remembered.
  • Placed the sensor in hot water and measured. When the difference in the information is large, the device works properly. If there are no differences, you need to replace it.

SM cm brand Bosch, the type of temperature sensor may vary.

Verification of the press start

With a working and termistor, the next element to be checked, is a press start. When it is clogged, there is no signal about the fullness of the tank with water. So the control unit does not give an order to include the heater and open the inlet valve.

How is the diagnosis of the performance of the tracking sensor at the level of water:

  • The washing machine is turned off from the network;
  • unscrew the rear or front panel, depending on the model;
  • Remove the heating element, having previously disconnected the wires;
  • examine the press.start of the press;
  • Remove and clean the tube of the water sensor;
  • Check the tightness of the part and warming up.

Pressostate relay is clogged with small particles of garbage. If there is no external damage, the cm is collected back.

Checking the electronic module

The absence of water heating may be caused by a violation of the failure of the control unit, programmer or breakdown of electronics.

Similar of the electric part arises from voltage drops in the network. Mechanical damage to electronics. consequences of vibration loads. All this leads to an error in the electronic control unit.

The identification and elimination of damage to the electronic module is trusted by a qualified master at the service center.

Checking the presence of scale

Hard water and rust particles lead to plaque on an electric heating element. Having examined the detail on the presence of scale:

For preventive purposes, cm with citric acid or vinegar is periodically driven away.

The presence of scale contributes to a quick breakdown of equipment and an increased electricity consumption.

Connection check

If after the check all the details turned out to be serviceable, but the water does not heat up, check the correctness of connecting the washing machine to the runoff.

  • turn off the equipment from the network;
  • check the hoses;
  • clean filters;
  • Install the ball valve, previously wrapping the thread;
  • The drain hose is located 50-100 cm high from the floor.

Plum must be drawn through a siphon shells, a bathroom into sewer.

Prevention

In order not to encounter a problem when a washing machine does not heat water, preventive measures should be carried out:

  • Before operation, they carefully study the technical instructions;
  • With hard water, softening agents are added;
  • periodically drive cm with a lemon or vinegar;
  • From time to time they check and clean the pipe of the press.

When these rules are respected, the problem of not heating water is doubtful.

In most cases, with the reasons where the water in the washing machine does not heat up, you can cope yourself. But if the problem has occurred in the control unit, do not try to figure it out yourself. Better to call a service master.

| Denial of responsibility | Contacts |RSS