The saeco machine empties into the drip tray

Decalcify ventilate in your saeco machine

Started to get very frequent rinsing and the last one stopped working and the hot water started flowing. The water connection from the boiler to the pump was not airtight.After start-up, the machine finishes its work and dispenses Ventilate. I understand it does not detect water or air in the system. Which sensor keeps this in check?

j-boiler_incanto_r.s.sup021yr_100-120v_189.pdf 149.27 KB Downloaded: 3066 times

Kahn’s Theorem: If nothing else works, read the abstract after all.

If the machine says VENTILATE, there is an air lock in the system.

VENTILATE Run the water through the water / steam tap until the message goes out. To do this, turn the circular valve counterclockwise (for most coffee machines). For machines with a quicksteam system, you must first press the drop button (to put the machine in water mode), then turn the valve to start the water.

VENTILATE. air in the system. What to do?: Take out the water tank, hold it for a few seconds and push it back in. If it still says so, fill a full tank of water. Place a glass under the hot water duralumin pipe. Open the tap. Fill a full glass of water until the message disappears.

What to do when the inscription VENTILATE ? This inscription indicates that you need to make small stones of the system. Fill a full container of water and open the hot water tap. Wait until the water flow is moderate, then the inscription will disappear.

This is detailed! Thank you, tomorrow I will try.

I have downloaded the two explanations: in German and Italian. it does not get any easier

Hello all. Vprinpipi practically this way once worked but water bucket probably ran if small, and now is not clear as the same picture only view from the side! in two rows inscription (the top inscription requires cleaning, the bottom air in the system (decalcify ventilate)) and cleaning and running water did not help (previously by the way there was the same) may someone find a solution in some other way? (I’ve been to the dishwasher once before and I’ve had it repaired. where once came the message of a magnetic valve and that in it there is a discrepancy) is a candidate for a trip to the service center

Main menu

Quick guide on how to perform descaling (Decalcify message ) in the Saerco Royal Professional coffee machine.

Yesterday I spent a lot of time until I managed to understand what was meant in the instruction manual for Russian users, which came with this machine.

As, I think, this information will be useful to many if not many owners of coffee machines Saeco decided to write a little literacy. Quick Introduction : the elimination of illiteracy) how exactly to do descaling Saeco Royal Professional. At a glance I will notice, judging by simplicity of the software of this coffee-machine, most likely the given sequence will approach and for their other machines.

For a start, if your Saeco machine shows on its monitor the message Decalcify, which means “perform descaling”, it is advisable to perform the function Descaling.: descaler). I have had this message shown somewhere on an 850-cup and six months after I bought the machine. It is recommended to see. We use only clean water and “Brita Intensa” filter.There is a small possibility that this message, when using tap water, may have seemed earlier.

To begin with, it is recommended to remove the water filter

It’s expensive, and needs to be changed every 2000 cups if you use it. Of course, with clean water, not that sludge that pours from the faucet. Our water in Lviv is just a terrible quality, plaque in the kettle, using water from the tap. it grows after a couple of boiling. That’s why I personally think it is imperative to use a filter.

Then it is recommended to pour a half-cup (100ml) here is a means (Pufas Glutoclean descaler), directly into the water tank:

Sold it in Ukraine in hypermarkets “Epicenter”. The cost of this case is 100 grivnas (12). Whether to use the brand-name, 8 times more expensive solution from Saeco, is up to everyone. I decided that Saeco got a little cheeky with the prices. Let’s see if I was right or not.

Next, it is advisable to add a water container, under the very top. In the coffee drawer, under the paranello you need to put the pot by 2.5 liter. If you do not have one, you can use the smallest container and glass, which alternate. The water drain cycle takes about 1 minute, in other words it is better to do it next to the drain, or have an additional container. You can use a container like this:

Next, it is recommended to press the menu button and select (press the “down” key repeatedly) the Descalling mode

press the “Enter” button (right upper). In this case, the monitor display shows Descaling.

After that it is necessary to turn the knob “paranello” (from below on photo), in the last position counter-clockwise, in other words to open it:

The machine will start to drip water at this point. Pour out 50 ml in some places and pause for a minute. This will be repeated until the reservoir runs out of water. This takes anywhere from 45 minutes to an hour. I will unknowingly perform this function twice.

As it came out, in other words, ran out of water. close the faucet “paranello” pour out everything you have in your container. Reverse the bowl. You press ESC on the keyboard. That’s the bottom right button. Select the menu item “Signal Descal”, go into it by pressing “Enter”, change its value up and down. on “Yes” and press ESC a couple of times to exit the menu. After this the machine stops showing the message about the necessity of cleaning. A displays the usual menu.

Water flows into the drip tray

Even if the rinse water will fall into the cup through the coffee spout, this water will still be in the drip tray. This is because the coffee machine drains the flushing water into the drip tray during automatic flushing to control internal flushing and ensure optimum performance.

The automatic rinse is performed by resetting the machine after a beverage has been prepared or after the cappuccinator has been used.

This flushing water can make it feel like there’s always some water left in the drip tray, or that it’s filling up faster than it should. However, this is not the consequence of a leak in the coffee machine.

Note. If the drip tray fills up with water after making 2 cups of coffee or overnight (without using the machine), you are advised to contact us for further assistance.

Block: 3/5 | Number of characters: 937

Individual peculiarities

For different brands of this class of home appliances are characterized by their own characteristics of operation and causes of such a problem when the coffee machine drains the water in the pan.

Drip Tray, Dreg Drawer & Brew Unit Maintenance on the Gaggia Accademia Espresso Machine


Excess water in the drip tray of your Saeco coffee machine can be an indication that it has not been drained on time. To avoid this problem it is sometimes sufficient to simply pour out the accumulated water each time after brewing. Also note that the Saeco coffee machine drains some of the excess water through the coffee spout after the automatic flushing cycle. In this case, it is not a sign of malfunction and is considered absolutely normal.

If the water when using or after washing Saeco fills the whole pan or pours over the edge, then this problem can be solved by placing an empty cup under the spout, through which the water drains. For ease of use, the manufacturer of Saeco. Philips. has equipped most models of its coffee machines with a special indicator light, which will let you know if the machine tray is full.

saeco, machine, drip, tray


Along with home appliances for the kitchen by the company Philips, units of the German manufacturer Bosch are very popular, among which the special recognition among consumers got, including the Bosch model TES71621RW. Products of this company are characterized by a high degree of automation of the coffee-making process and a variety of functions, among which there is even a self-calculation. However, despite the high European quality of parts and assembly, at times consumers of this equipment are also faced with a problem when a Bosch coffee machine dumps water in the pan. Practice shows that the most common cause of such faults is leakage at hose and bushing connections.


The products of the market-proven coffee machine manufacturer Delonghi also cause irregularities in which excessive amounts of water leak into the drip tray. However, unlike other manufacturers, in the vast majority of cases the cause of Delonghi malfunctions are cracks in the plastic parts of the machine.

Cost and repair of coffee machines with defect of water in the sump

We have already repeatedly eliminated the problem with water in the coffee machine tray, and we know the reason why it occurs. Below is a table of repaired machines.

Service Price
Diagnostics free
Work 2500
Details in table

The first block of malfunctions is the most serious. They should be eliminated only by professionals, because amateur intervention will often only worsen the situation.Addressing to the service ensures a client a consistent and thorough diagnosis, identifying primary and secondary causes of failure, the repair of the coffee machine. The availability of parts and components at the master will speed up the work, which means that the coffee machine will return to its owner as quickly as possible.What malfunctions are encountered by professionals when the coffee machine pours water into the tray:

  • Wear of sealing elements. on the piston or other parts. This defect appears in the process of long-term use of household appliances and is associated with wear and tear of highly elastic material. The sealing rings crack over time. the water begins to flow into the pan, getting on the body elements, prevent the normal operation of the product.
  • Mechanical damage such as cracks in the metal and plastic parts, in the bulb, in the filter elements. Occur when handling equipment carelessly, as well as due to manufacturing defects or as part of the natural aging of materials. One solution. complete replacement of the defective element.
  • Hydraulic malfunction is the most common problem with capsule coffee machines. Sometimes professional cleaning of the hydraulic system is sufficient to eliminate the defect, but in some cases serious repairs are required.
  • Leak tightness in the joints of bushings and hoses. A mechanical problem, often leading to water in the sump.
  • Scale build up. Not all people regard this defect as serious. And in vain. Scale accumulated on the walls of the tubes leads to the appearance of a variety of failures, and most of them just breaks the tightness of the mechanism elements. The negative effect of limescale. water in the pan. Do-it-yourself descaling is possible for units with self-cleaning function. In other cases, professional intervention is recommended.
saeco, machine, drip, tray

It is worth understanding that there is no perfect home appliances: both the Bosch coffee machine drains into the tray, and KRUPS models, and products of the firm Delonghi. Only necessary to locate and repair the cause in good time.

Breakage of the float sensor

If you have poured water into the tank, but there is no water and the coffee machine does not respond to it, then the problem is usually a broken float sensor. Check whether this sensor is working, you can do the following:

How to Reset a Gaggia Anima Brew Unit. Solves Drip Tray and Brew Unit Insertion Problems

Check whether the float appears on the surface of the tank;

If the float does not float, it is necessary to clean the working place of the float.

Only rarely is the float actually repairable. often it needs to be replaced. If you decide to replace the float with your own hands, you should choose a similar float responsibly. If you want to protect yourself from these problems, then feel free to call the master.

What to do if the water supply in your coffee machine is broken?

Carry out the maintenance recommended by the manufacturer. Then inspect all connections. If the equipment is connected to the water mains, make sure the lines are not blocked, there is water in other appliances, plumbing in the house.

If you cannot solve the problem when the device does not pump water yourself, use the services of the Remontano repair shop. You can call an engineer at home, in the office by dialing 8(495)777-19-19 from 7 to 23 hours on any convenient day of the week. If necessary, place a callback order. We work with famous brands including Nespresso, Delonghi, Krups, Dolce Gusto. Our service is covered by official warranty. You will be personally present during the repair, you can verify the fault of specific nodes, parts.

Block: 3/3 | Number of characters: 818

Water goes into drip tray if coffee is not poured completely

Philips HD8745 coffee machine doesn’t fill fully, water goes in the tray, what to do??

Check the brewpot seal, check the coffee pipe connection.If you don’t know anything about the coffee machine, call a specialist, it will be cheaper.

First of all, the water spills when you turn it on and off through the same path as the coffee, to flush the tract. If you don’t put a container underneath. Everything goes in the drip tray. Secondly, even if you collect this water, quite a lot still flows into the tray during brewing. This is not a hole in the pipe but a feature of this machine.

The customer writes about the coffee, not the rinse.When you make coffee in a Saek, there is a minimum amount of water in the tray, it’s not Bosch.

When you pour the coffee, unlike the rinse, a small amount of water enters the tray.If your machine has half of the liquid in the tray when you serve coffee, check whether it is coffee or water.If it is water check the seal on the brewing unit and the brewing connector, if it is coffee check if the pipe inlet of the brewing unit to the coffee pipe is broken.

Good afternoon, check the seals on the brewing unit and the valve. It is very likely that they are out of order.

This is what happens when the top strainer is clogged. During brewing all the water that has passed through the coffee goes up into the cream valve. Coffee is squeezed between the upper and lower mesh, a spring that presses the lower mesh piston upwards. But if the flow of water through the upper mesh is hampered, the water entering the coffee under pressure pushes the piston down, and the coffee machine is a lot of water, as well as can be clogged channels, you need a complete diagnosis of the machine. Repair costs from 1500 diagnostic for free.

You need a complete preventive maintenance of the equipment.complete disassembly, lubrication, cleaning of the grid and ducts. 2000r approximate price of such service

Error code “E05/E14” is displayed

Switch the coffee machine off and leave it to rest for 1 hour.

Call us at tel. (495)507-73-17 and get advice on what to do if the error code “E05” appears.

Please refer to the operating instructions for the meaning of the indicators. Download your Saeco espresso machine manual, find the chapter on what the LEDs mean and try to fix the problem yourself.

To repair your Saeco Minuto hd87. To eliminate the leak

Today we will repair your Saeco.The defect. it began to pour a little coffee into the cup, and leaks in the tray. This is a typical defect of this line of coffee machines. If the leak is not in the brewing unit, it is inside the coffee machine. Our coffee machine is leaking inside the casing.Let’s proceed to disassemble and repair the defect.For disassembly, we need a flat and Phillips screwdriver, Torx10, pliers and a spatula (table knife), as well as part from the manufacturer with the number 421941279742Open the top covers. Removing the water container. Pulling out the tray. Remove the brewing unit. Removing the panarello nozzle (cappuccinator). You must also remove the remains of coffee from the coffee hopper. To do this, use a Phillips screwdriver to unscrew the plastic element covering the grinder. Remove the coffee from the tray with a spoon.Disassembly will consist of several stages:1 stage is unscrewing stainless steel self-tapping screws from the top.Step 2. disassembly of the front panel: namely, removing the frame of the cappuccinator tube with a flat screwdriver, as well as the tube itself, and remove the liner and further disassemble the coffee delivery mechanism. Under this mechanism there are self-tapping screws, which also need to be unscrewed. Now lift the upper part of the housing, and after separating the water supply tube and the loop of the water sensor in the tank, set aside.3 step. Unscrew screw near the cappuccinator tube, screw near the magnetic lock of the side door, 2 screws near the coffee dispenser, and 4 screws on the bottom of the cabinet under the brewing unit.

Then slide the inside of the coffee machine upwards. Our problem is a plastic tee that connects the pipe from the boiler to the brew block and the pipe that leads to the cappuccinator.We use a Torx10 to unscrew this tee. A defective tee has a crack, through which the hot water leaks into the sump. Disconnect the rubber tubes from the adapter using pliers and replace the damaged assembly with a new one.Replace the tubes and fasten them.Now you can assemble the coffee machine in the reverse order. While assembling take care that the water tubes are not squeezed. Don’t forget to connect the water sensor loop in the tank. Screws made of stainless steel should be used in those places where moisture can accumulate.Checking the operation of the coffee machine. If everything is done properly the coffee machine will be happy again with a big cup of aromatic coffee.

| Denial of responsibility | Contacts |RSS