Turning on the Samsung refrigerator with a door display. Temperature settings in…

Refrigerator samsung constructions

Quite common among refrigerators manufacturing technologies is Samsung No Frost. It is also called a defrosting of a windy type.

Any Samsung No Frost refrigerator is equipped with an evaporator, which is taken from the Cold Cold chamber into the hull of the rear wall.

The kit includes an additional fan. According to the instruction manual, the Samsung No Frost refrigerator involves continuous circulation of cold air in the chambers.

Cool masses enter the cells. For this, special channels are provided that contains the Samsung No Frost refrigerator. The instruction of the device suggests that moisture does not settle on the walls. It accumulates in the form of hoarfrost in the coldest area, which is the evaporator.

Samsung Refrigerator Display Reset. RF Series

Samsung No Frost refrigerators, according to the instructions, turns off from time. This happens using a small heater.

The “No Frost” system has both freezing and refrigerating compartments. The presented technology will make cleansing inside the refrigerator departments only once a year. This strongly saves users time.

Samsung refrigerators

Depending on the model and type, the temperature in the closet and the freezer differs. If you change the temperature in the freezer, in the cabinet the parameters are also in dynamics. Adjustment is carried out using buttons, which are adjusted according to the indications of temperature sensors located:

The task of the sensors to transfer the measured parameters to the system of electronic control of the Samsung refrigerator. Temperature control is carried out on the display. In each case, setting up a certain model, you need to be guided by the instructions for installing the temperature of the refrigerator.

Before changing the temperature, it is necessary to give time in order for the thermostat to accept the parameters of the environment. After that, turn on the Samsung refrigerator, let it work to ensure parameters set in factory settings. You can check the correspondence of the indications of the electronic board using a glass of water installed in the center of the refrigerator and thermometer.

How to adjust the temperature within the permitted sector, it is written in the instructions for the Samsung refrigerator, use the advice of the master on the video from practical experience. To change the mode, you can use the Cooling Power, Fridge buttons and a display or manual thermostat. Do not strive to set the minimum temperature, this increases the power consumed.

If the Samsung refrigerator is two.chamber, the freezer is adjusted separately, it can have an accelerated frost function. The action of the intensive mode lasts no more than 72 hours, with an automatic transition to a standard level.

A new device after connection, it can work for a day without stopping. You can start setting the temperature after stabilizing the regime. It is important to be guided by the instructions. You can rearrange the temperature using buttons and display, or manual regulator. About how to regulate the regime, the manual developed for each series of Samsung refrigerators informs.

How to properly set the temperature in the refrigerator Samsung No Frost

Unlike drip defrusting systems, the system of dry lining changes the temperature balance in both chambers. The evaporator is put into the back wall, continuous ventilation of cameras is created. Samsung two.chamber refrigerators are also possible to configure the No Frost temperature as with a drip defrust, using electronic regulation or manual control.

On the example of the Samsung refrigerator with the No Frost system, the RL33 EAMS model, we will figure out why the display temperature rides. Flashing is explained by the reasons associated with the wrong temperature regime. Often there are deviations.

  • The temperature in the Samsung refrigerator is higher, due to frequent opening of the door in a very warm room. If you do not open the circuit for 2-3 hours, the blinking will stop. Perhaps the temperature in these conditions is unattainable. Then nothing remains, how to rearrange the task on the display towards the increase.
  • The mode is not set, indicators, notify the need to set control points for the correct operation of the system.
  • One of the temperature sensors is faulty.
  • With a loose door closed, the system signals a loud sound signal.

It should be noted that Samsung refrigerators are most reliable, and adapted for work in energy supply conditions.

It is difficult for a modern person to do without a refrigerator. But quite often it happens that a recently purchased and seemingly quite high.quality unit, which should serve at least a few years, fails in a couple of months. One of the most common reasons is the wrong temperature regime.

We offer to familiarize yourself with how to clean woolen costumes and jackets and how to care for them

Samsung produces several models of refrigerators. They differ not only by design, but also with functions. Respectively. each type needs its own temperature regime. Now on sale you can find the following types of units of a recognized Korean brand:

  • Two.chamber. In two.chamber models, the freezer is on top. These rather compact units have been produced for a long time, but are still very popular. Read more about them in our separate article “Samsung No Frost two.chamber refrigerator. operating instructions”.
  • Combi. In models of the Combi class, a large freezer is located below. The cameras are autonomous, have separate cooling.
  • Side-by-Side. This model consists of several cameras. Outwardly it resembles a closet, each department has its own door.

Samsung refrigerators can have a different purpose. On this basis, they are divided into several categories:

Samsung produces several models of refrigerators. They differ not only by design, but also with functions. Respectively. each type needs its own temperature regime. Now on sale you can find the following types of units of a recognized Korean brand:

  • Two.chamber. In two.chamber models, the freezer is on top. These rather compact units have been produced for a long time, but are still very popular.
  • Combi. In models of the Combi class, a large freezer is located below. The cameras are autonomous, have separate cooling.
  • Side-by-Side. This model consists of several cameras. Outwardly it resembles a closet, each department has its own door.

Samsung No Frost refrigerator: Operating instructions with a photo

Following the recommendations of the manufacturer and the operating rules, you will prevent many equipment breakdowns in the future. The basic rules for caring for the unit are simple, consider some of them.

Product storage:

  • Do not refrigerate hot and warm products in the refrigerator.
  • Store products in packets retaining freshness or in tightly closing containers with a lid so that the products do not dry out and do not make a smell.
  • Raw and ready.made products store separately.
  • Do not put the products too close to each other, leave the place between them for air circulation.
  • Strictly monitor the expiration date of the products.
  • Before putting washed vegetables and fruits in the refrigerator, let them dry.
  • Store vegetables and fruits in the compartment intended for them to maintain their taste and freshness for a long time.

Cleaning the refrigerator No Frost and caring for it:

  • If a layer of ice and hoarfrost formed inside the device, then immediately turn it off to defrost and remove the resulting water with a soft dry rag.
  • In refrigerators with the “No Frost” system, only in one chamber it is necessary to periodically defrost the drip type separation. Disconnect the device from the network and open the thawing doors.
  • If there is a need to clean the on the unit, then do it in a non.fire, since when overheating the compressor may fail.
  • To wash the refrigerator, use a soft rag and a dishes for washing dishes, you can use any abrasive products of household chemicals. Remain the detergent be removed with clean water, and the surface of the device is dry dry.
  • Do not forget to clean the back surface of the refrigerator from dust and dirt.
  • Remove the emerging pollution immediately so that they do not have time to eat into the surface of the internal details of the device.

Важно! Проводите очистку холодильника 1-2 раза в год, чтобы продлить срок службы устройства.

Safety precautions:

  • To avoid the compressor breakdown, the re.turning on the device is allowed no earlier than 5 minutes after disconnecting.
  • Do not spray fiery substances next to the refrigerator, such as varnishes and paints in aerosol spray cans, as this can lead to explosion.
  • Do not use the refrigerator outside the room, and also do not allow water to enter the device, including it from the rain.
  • In the summer heat, try not to open the refrigerator door too often, and at the same time do not hold the door for a long time open.
  • Do not store easily flammable, caustic and explosive substances in the refrigerator.
  • Do not store drinks in a glass container in the freezer, as the bottle can burst.
  • Do not use the refrigerator if it does not function properly or damaged.

Важно! Устанавливайте холодильное устройство вдали от прямых солнечных лучей, газовой плиты и других источников тепла.

Samsung refrigerator operating conditions

The correct installation of a new household refrigerator involves complete isolation from heaters and heating radiators. Install it in a cool and well.ventilated room. Do not also put near gas stoves and electric stoves. Also, experts do not advise placing at the southern windows, through which direct sunlight will penetrate daily on the corps. Oddly enough, the best place for installation is with a draft.

If the temperature of the kitchen room increases due to the “warm” floors, select a place on an inactive area. Or consider in advance when equipping such a gender that electrical appliances will be installed on it.

What threatens the constant finding of the refrigerator in warm areas? This will cause the continuous operation of the compressor due to the constant circulation of warm air around the housing. The uninterrupted operation of the motor will significantly reduce the service life of both itself and the electrical appliance.

Before you release the movers and install the refrigerator, check the equipment, re.read the warranty card and check the performance. Only having convinced all the components, the correctness of filling the guarantee and serviceability of the equipment, release the representatives of the store. If something went wrong, in place and in fact make a claim, otherwise it will be difficult to prove something then.

  • The humidity of the room should be no higher than 80%. If there is nothing to measure humidity, pay attention to the walls, floor and ceiling of the kitchen. if you notice condensate, humidity is overstated.
  • Provide sufficient ventilation. Having discovered problems, contact the housing office for cleaning ventilation ducts.
  • Choose the cool place in the kitchen.

Pay attention to the climatic class indicated on the information sticker.

You plan to install 2 refrigerators at once or put a freezer nearby nearby? Do not put them close to each other. provide a distance of at least 2 cm.

Also observe the rules for connecting to the mains:

  • Relate the parameters of the equipment with the parameters of the mains. If it works with a voltage of 220 V, connect to a two.phase electric network, 380 V is a three.phase.
  • Connect to a ground outlet to ensure the safety of operation. The installation of a difavtomat to protect the technique from voltage jumps will not hurt.
  • Do not use extension cords, carrying and adapters. connection is permissible strictly into a stationary outlet in the wall.

How to set the temperature in a double.chamber Samsung refrigerator

If the Samsung refrigerator is two.chamber, the freezer is adjusted separately, it can have an accelerated frost function. The action of the intensive mode lasts no more than 72 hours, with an automatic transition to a standard level.

A new device after connection, it can work for a day without stopping. You can start setting the temperature after stabilizing the regime. It is important to be guided by the instructions. You can rearrange the temperature using buttons and display, or manual regulator. About how to regulate the regime, the manual developed for each series of Samsung refrigerators informs.

How to properly set the temperature in the refrigerator Samsung No Frost

Unlike drip defrusting systems, the system of dry lining changes the temperature balance in both chambers. The evaporator is put into the back wall, continuous ventilation of cameras is created. Samsung two.chamber refrigerators are also possible to configure the No Frost temperature as with a drip defrust, using electronic regulation or manual control.

How to TURN UP a Samsung Fridge’s Temperature

On the example of the Samsung refrigerator with the No Frost system, the RL33 EAMS model, we will figure out why the display temperature rides. Flashing is explained by the reasons associated with the wrong temperature regime. Often there are deviations.

  • The temperature in the Samsung refrigerator is higher, due to frequent opening of the door in a very warm room. If you do not open the circuit for 2-3 hours, the blinking will stop. Perhaps the temperature in these conditions is unattainable. Then nothing remains, how to rearrange the task on the display towards the increase.
  • The mode is not set, indicators, notify the need to set control points for the correct operation of the system.
  • One of the temperature sensors is faulty.
  • With a loose door closed, the system signals a loud sound signal.

It should be noted that Samsung refrigerators are most reliable, and adapted for work in energy supply conditions.

Temperature setting on the refrigerator Samsung

turning, samsung, refrigerator, door

The instruction attached to the Samsung refrigerator, how to set the temperature, allows you to conduct an independent adjustment of equipment. When setting up the recommendations of the manufacturer, which will extend the service life of the equipment and ensure the safety of products.

How to set the temperature in the Samsung refrigerator?

It largely depends on which model and type. Even inside the unit, the temperature is different:

Important! Some models have the so.called “freshness zone”, where the temperature is about zero.

What are the sensors?

The temperature in the Samsung refrigerator, as well as in the models of some other brands, is carried out using the control panel. She, in turn, gives the “team” to the sensors that are inside. These elements serve in order to set the optimum temperature in each compartment and maintain it for a long time. From the sensor, the information enters the control scheme that “is responsible” for the compressor work.

The total sensor is located in the central part of the refrigerator. It gives out an average indicator, on the basis of which the regime is determined. In almost all models are universal temperature controllers 502at. If the sensor has failed, it must be replaced immediately, otherwise. the unit will first work unstable, and then it will stop at all.

Important! You should not change such devices yourself, it is best to contact the service center of the same company.

We set the parameters

An instruction is attached to each refrigerator model that must be carefully read and act in the indicated order. On the control panel you will find a display, on it you can see information about the mode and errors. For models in which the freezer and refrigerator are in the same closet, temperature control is carried out as follows:

  • Measure the exact temperature of cooling. for this you need to place a glass of water in the central compartment.
  • If the water cools up to 4 ° C. this is the best option, in the central part of the unit this temperature should be.
  • If the temperature is 1-2 ° C higher or lower optimal, you need adjustment.
  • On the control panel, find the Cooling Power or Fridge button and press it.
  • If there are no buttons, find the handle of the thermostat and turn it to the desired angle. from 1 ° C to 7 ° C.

Important! The temperature does not have to be minimal. the installation of the regulator at least leads to an increase in electricity consumption.

We adjust the temperature of the freezer

Like a refrigerator, the freezer has a thermostat. She has more modes. For example, if there is an accelerated frost mode, the temperature will drop for three days, and then return to the standard. The mode is regulated using the button, like the refrigerator.

The function no frost

This function gives a completely wonderful opportunity not to defrost your unit forcibly. Such refrigerators last longer, and they need a minimum care. So that the ice does not freeze, an additional fan is put in the model. The temperature regime is set in the same way as in two.chamber models.

If the indicator blinks

With “Samsungs” and some other models, situations quite often arise when the refrigerator seems to be working normally, and the indicator or display does not behave as it should be. for example, they blink. Incorrect behavior can be caused by a number of reasons, including related temperatures:

  • For example, the temperature is higher than you set-perhaps due to the fact that the door often opens, and at home it is very warm. In this case, you need to close the door and leave the unit alone for a couple of hours. He must return to normal.
  • In the same way, the display and the indicator react if the temperature regime is not given at all. They just do not know how to behave, and they blink, calling the owner to order. The only way out is to set the mode.
  • Most models for the ice tray are responsible for a separate indicator. He can also blink, signaling the owner that the tray is not as it should. Change the situation and everything will return to normal.
  • Sometimes indicators react in the same way if you rearranged the door shortly before. We’ll have to check how reliable the contacts are.

Possible problems and their elimination

During the use of Samsung equipment, users are faced with a number of troubles:

  • Increase in the temperature of the snot chambers caused by frequent opening of the front doors. To correct the situation, you should throw the product in a locked state for 1.5-3 hours, the temperature background of the snusy of the case will return to normal. The malfunction appears in the absence of air circulation around the heat exchanger placed on the rear wall of the case. To improve the cooling criterion, it is recommended to push the equipment from the wall and provide a gap between the sidewalls and furniture.
  • When installing refrigeration equipment near the heating radiators or under direct sunlight, the case overheats, leading to an increase in the temperature background in the freezer or refrigerator compartment. You need to move the product to another room or install protective thermal screens.
  • Damage of the indicator installed on the door. The disadvantage appears when rearranging the loops of the doors due to the incorrect or loose connection of the plugs. To restore performance, the connectors should be disconnected, and then correctly join the wiring train.
  • Error when adjusting the equipment (incorrectly exhibited cooling value). The inconsistency is decided by adjusting the options in coordination with the advice of the manufacturer.
  • The supply of warm water from the distribution tap (used to parts of equipment modifications). To cool fluid, air flows circulating in the refrigerator are used, to lower the temperature, it is necessary to increase the performance of the compressor.
  • Flickering the scoreboard displaying the temperature in the refrigerator compartment. Deficiency appears with a long open door or after placing hot goods on the shelves. To eliminate the deficiency, you need to turn off the power for 10 minutes, after re.turning on and rebooting the controller, the flicker stops.
  • Freezing of goods when located near the ventilation channels in the refrigerator is not a malfunction, since cooled air is supplied from the channel. It is recommended to move the products to another section or set the shelf at a distance from the ventilation window.

An additional prerequisite is a breakdown of an electric temperature measurement sensor or a breakdown (oxidation) of the connecting harness. To restore the assembly, you need to contact the service center, independent intervention in the design of the refrigeration unit leads to irreversible damage to the nodes.

Samsung refrigerator temperature sensors

The purpose of the temperature sensor. registration of temperature in a certain area of ​​the refrigerator. Passing the information received to the control scheme, it determines the compressor operating mode, changing its intensity.

In each refrigerator chamber, you can set the required temperature.

Samsung is responsible for the temperature regime in Samsung refrigerators: subsequent sensors:

The conclusions of all sensors come to the electrical control scheme that issues commands to maintain this regime. For the base, the average temperature indicator in the central area of ​​the refrigerator is taken, because the main sensor is in this area.

Temperature setting in Samsung refrigerators

Each model of the refrigerator or freezer is equipped with instructions indicating the order of actions necessary for the normal operation of the entire unit. There is a display on the control panel, informing about the mode and possible problems. Adjusting the Kombi type refrigerators, when the general and freezers are in one closet, is as follows:

The exact temperature of cooling is determined. For this, a glass of water is used, placed on the central level of the refrigerator. 4 indicates normal work. An increase in one or the other indicates the need for intervention;

There is a display on the control panel, informing about the mode and possible problems. Temperature setting can be carried out by the Cooling Power or Fridge button if the model is equipped with them. Or the temperature regulator, in the form of a rotated handle.

Standard range of refrigeration chamber adjustments from 1 to 7 degrees.

The temperature of the freezer, in two.chamber refrigerators, has separate settings, only the adjustment range here is much wider.

turning, samsung, refrigerator, door

With the function of accelerated frost, the freezer reduces the temperature to a minimum by 72 hours. At the end of this mode, she returns to normal work.

Types of faults of the refrigerator

A fairly unpleasant situation when the Samsung No Frost refrigerator suddenly does not freeze. This can be caused by a number of reasons.

Most often, the equipment breakdown is caused by its improper operation and installation. It happens in rare cases that the factory defects of the equipment become the cause of the malfunction.

To preserve the warranty service of the manufacturer, make an independent disassembly of the Samsung No Frost refrigerator strictly prohibited.

Many models are equipped with a display on which a certain type of malfunction is displayed. Based on self-diagnosis, warranty repair and disassembly of the Samsung No Frost refrigerator are made by a qualified specialist of the manufacturer.

Malfunctions are more and less common. What they are and how to avoid them, you should study in more detail.

In order to facilitate the process of caring for this type of equipment, the manufacturer has provided an automatic process. To understand how to defrost the refrigerator “Samsung No Frost”, you should familiarize yourself with the sequence of the standard procedure of this action.

How to set up temperature in the refrigerator? Samsung and other manufacturers make reliable manufactured models. However, the incompetence of consumers in setting up causes equipment malfunctions.

Private user does not always bother with the correct setting of temperatures in the refrigerator, which is fraught with disorders. The presented material will tell about the functioning mode of devices that allows you to save products and cooling device. We describe technical details and common breakdowns found during operation.

The No Frost models from the World manufacturer Samsung comes together with the instructions. The latter allows the user on their own to put a suitable method of action of the apparatus. We advise you to adhere to the instructions of the plant to prevent excesses during the use of the refrigerator.

How to adjust the control panel correctly?

A glass of water is placed in the central part. Thus, we measure the exact temperature of cooling.

If the final temperature is 4, then everything is fine.

In the case of an elevated temperature by 1-2 degrees, it is necessary to adjust the Cooling Power, Fridge button or the thermostat handle.

If the button is absent, then the handle of the thermostat with seven divisions will help. Turn it to the required temperature.

It makes no sense to set the minimum temperature, as this will incur high energy expenditures and constant overload of the compressor.

Malfunctions associated with temperature regimes

Samsung refrigerator operation may be accompanied by the following situation: the temperature indicator on the display or control panel flashes. At the same time, the unit functions and does not reveal obvious breakdowns. What to do in such a situation will tell the instruction.

The temperature increased more than 3 degrees. The reason is a frequently opened door at high ambient temperatures. For liquidation, it is necessary to close the door and let the refrigerator enter the normal mode (2-3 hours);

The temperature regime is not set. Install according to the instructions;

The ice tray is incorrectly installed (separate indicator). Check and put correctly;

Malfunction in the contacts of the electronic panel. Occurs in the case of rearrangement of doors. Check the connections.

If the relevant actions do not give changes, the intervention of a specialist is required.

Incorrectly set temperature in the refrigerator leads to the formation of ice crust. In addition to inconvenience, this is accompanied by increased energy consumption. The flow of water in the tray indicates abnormal work. These factors are the reason for the rapid damage of the stored products, which manifests itself not only in decay, but also in drying. Therefore, at the slightest suspicion of problems, you should refer to the attached instructions.

Watch the video review of the Samsung RL-36 No-Frost model:

It is difficult for a modern person to do without a refrigerator. But quite often it happens that a recently purchased and seemingly quite high.quality unit, which should serve at least a few years, fails in a couple of months. One of the most common reasons is the wrong temperature regime. How to properly redo, set, configure, adjust the temperature in the refrigerator “Samsung” No Frost, as well as in some other popular models? How to reduce, lower to reduce cold? Read about this in our article.

turning, samsung, refrigerator, door

How to set up different models!?

The user must set the temperature in the Samsung refrigerator manually, focusing on the degree of equipment loading and external conditions. The attached instructions for configuration and operation contains advice on adjusting the product. In the design of the refrigerators, sensors are mounted that measure the air temperature inside the equipment, as well as in the room and body of the evaporator. Information is transmitted to the electronic control unit, which adjusts the performance of the compressor.

How to adjust the temperature refrigerator Samsung RS50 / RS52 / RS54

Temperature control in the freezer:

The temperature in the freezer can be set in the range from.14 ° C (8 ° F) to.25ºC (-14 ° F) for your certain needs. Press the Freezer button (“freezer”) until the necessary temperature appears on the display. Remember that products such as ice cream can melt at temperatures.16ºC (4 ° F). The values ​​on the temperature display will change sequentially from.14 ° C (8 ° F) to.25ºC (-14 ° F). After indicating the display.14 ° C (8 ° F) The countdown will begin again with.25ºC (-14 ° F). Five seconds after installing a new temperature on the display, the current temperature in the freezer will be shown again. However, this value will be changed after the transition of the freezer to a new temperature. The temperature in sections with two stars is slightly higher than in other sections of the freezer.

Temperature control in the refrigerator:

The temperature in the refrigerator can be set in the range from 7 ° C (45 ° F) to 1ºC (34 ° F) for your certain needs. Press the Fridge button (“Refrigerator”) until the necessary temperature appears on the display. Temperature control in a refrigerator occurs as a temperature control in a freezer. To install the required temperature, press the Fridge button (“Refrigerate Camera”). After a few seconds, a new temperature will be installed in the refrigerator. This will be displayed on a digital display.

  • The temperature in the freezer or in the refrigerator may increase from the door opening too frequent, or if a large number of warm or hot products are placed on one of the sides.
  • This can lead to blinking a digital display. After returning the freezer and refrigerator to normal set temperatures, the flashing will stop.
  • If flashing does not stop, it may be required to “reset” the refrigerator. Try to turn off the device from the network, wait for about 10 minutes and turn it on again.

How to adjust the temperature refrigerator Samsung 20nams

  • The temperature level in the freezer can be set between 1 (Cold) and 9 (Colder).
  • Close the Fre button sequentially. TEMP until the desired level has been reached.
  • When choosing each level, the LED indicators light up and go out, as shown in the table.
  • The temperature level in the refrigerator can be set between 1 (Cold) and 9 (Colder).
  • Click the Ref button sequentially. TEMP until the desired level has been reached.

When choosing each level, the LED indicators light up and go out, as shown in the table.

Note! For ease of use, temperature levels for refrigerated and freezer chambers were programmed at the manufacturer. When the refrigerator is first turned on, after installing it, the temperature level is both for the refrigerator and the freezer to be set to the norm (level 5).

How to adjust the temperature refrigerator Samsung RB-37J5271SS

Press the Fridge button (refrigerator) to set the desired refrigerator temperature in the range from 1 ° C to 7 ° C. The default temperature value is 3 ° C, and each time when the Fridge button is pressed, the temperature will change in the following order, and the temperature indicator will display the desired temperature. Press the button for 3 seconds to activate the Vacation function. The Vacation indicator lights up, and the refrigerator is installed on a temperature below 17 ° C to minimize energy consumption when you go on a long vacation or business trip, and there is no need to use the refrigerator. When the Vacation function is activated, the freezer remains turned on. The Vacation function will be automatically deactivated if you adjust the refrigerator temperature when the Vacation function is enabled. Do not forget to remove products from the refrigerator before using the Vacation function. When the Vacation function is activated, the CoolSelect Zone function does not work. When the Vacation function is not activated, the CoolSelect Zone function works.

Press the Freezer button to set the desired temperature of the freezer in the range from.15 ° C to.23 ° C. Default temperature is equal.19 ° C, and each time when the Freeze button is pressed, the temperature will change in the following order, and the temperature indicator will display the desired temperature. Press this button for 3 seconds to turn on the Power Freeze function. The Power Freeze indicator lights up, and the refrigerator reduces the time required to freeze products in the freezer. This function will be activated within 50 hours, and the indicator of the freezer will not change. This function will turn off automatically. When the Power Freeze process is finished, the Power Freeze indicator turns off, and the freezer switches back to the previous temperature setting. When using this function, energy consumption increases. Do not forget to disconnect it if this is not necessary, and return the freezer to its original state. To turn off this function, press the Freezer 3 seconds button. If you need to freeze a large number of products, activate the Power Freeze function 20 hours before.

How to setup

The user must set the temperature in the Samsung refrigerator manually, focusing on the degree of equipment loading and external conditions. The attached instructions for configuration and operation contains advice on adjusting the product. In the design of the refrigerators, sensors are mounted that measure the air temperature inside the equipment, as well as in the room and body of the evaporator. Information is transmitted to the electronic control unit, which adjusts the performance of the compressor.

Capillar system

Equipment with a drip principle of defrosting has various temperature settings for the refrigerator and freezer. The change in the temperature background in the freezer is automatically reflected in the state of the main compartment.

To configure the temperature in the Samsung refrigerator, you need to set the desired value by a rotary corrector or buttons, the number is displayed on the display (if there is a node). To verify the operability of the node and the correctness of the device’s readings, a glass of water is used, which is placed in the center of the refrigerator. The water temperature should be 1-5 ° C (determined by the domestic thermometer laid in the container).

Two.chamber refrigerator

Two.chamber models differ in the use of separate regulators, additional keys are mounted on parts of modifications of refrigeration units for accelerated cooling of the upper chamber and quick freezing of products located in the freezer. If the equipment was transported in winter, then before starting the setup, the product warms up in the room for 10-12 hours.

In order to adjust the temperature, it is recommended to set the minimum value for 1 hour. During this time, the cavity of the freezer is cooled, and the compressor begins to work with stable performance. Then the user sets the desired temperature value by turning the controller or clicking on the buttons. For some models equipped with 2 compressors, separate tuning for the freezer and refrigerator is used.

Temperature control in the Samsung refrigerator using a regulator

  • Find the temperature controller. The regulator must be preliminary with the arrow indicating to the center. On the right you can see the word “warmer”, while the word “colder” will be on the left.
  • Look to the right and left of the regulator. Next to the words “colder” and “warmer” you will see a number of numbers. Having set the regulator on value 1 in the direction of the cold, it will slightly reduce the temperature in the refrigerator, while the installation of the regulator per value of 1 in the direction of heat will slightly increase the temperature.
  • In accordance with the measured temperature in the refrigerator, move the regulator by 1 aside “warmer” or “colder”. After 5-8 hours, check the temperature again to find out if the adjustment for temperature changes affected. If you do not notice a sufficient change, turn the regulator for the next number.
  • Continue to turn the regulator and measure the temperature until you get the desired temperature inside the refrigerator.
  • Make a mark on the regulator to indicate perfect settings. If the regulator moves to the side, you will know how to return it to the desired value.

Temperature control in the Samsung refrigerator using a switch

  • Find a sliding switch in the refrigerator. A number of numbers can be located on top or bottom of the switch. Most often, “1” means the coldest settings, while a higher number means warmer settings.
  • Move the switch to the left of 1 if you want to reduce the temperature in the refrigerator. Or move the switch to the right if the temperature in the refrigerator is too low.
  • Measure the temperature after 5-8 hours. If you received the desired temperature inside the refrigerator, then the switch is placed correctly. If the temperature is still not the same that you need, move the switch to an additional mark to the right or left until you get the desired temperature inside the refrigerator.
  • Marker note the ideal position of the switch on the refrigerator wall. You will always know where to move the switch if it moves.

Temperature control in the Samsung refrigerator using a digital keyboard

  • Find a digital temperature indicator in the refrigerator. The digital indicator is usually located at the top of the refrigerator, immediately under the freezer.
  • Using the shooter, configure the temperature until it is from 2 to 4 degrees Celsius. If you have a keyboard, then just enter the desired temperature.
  • After 5-8 hours, measure the temperature inside the refrigerator to make sure that there is a sure temperature.

What temperature should be

The optimum temperature in the refrigerator and freezer is indicated in the documentation. The manufacturer recommends installing the value in the freezer.18 ° C, providing uniform cooling of the refrigerator compartment. The technical characteristics of the compressor allow reducing the air temperature to.26 ° C, the function is used for accelerated freezing of products. Long.term operation of the equipment at maximum performance leads to damage to the components and the failure of the refrigerator.

The standard air temperature in the refrigerator does not exceed 5 ° C. Samsung produces installations with convection heat transfer, which differ in varying degrees of warming up the air inside the compartment. The Samsung No Frost refrigerator with electronic control is equipped with fans for the forced movement of air masses, the temperature spread inside the refrigerator does not exceed 1 ° C.

Do you need a freezer?

Refrigerators are used for a variety of purposes. Therefore, Samsung has released several refrigerators:

By the type of cooling mechanism, two types are distinguished:

Absorption refrigeration systems are of noiselessness, less weight compared to compressor. Their performance is much less than that of compressor refrigerators and they, simply put, give less cold. Their internal temperature depends on the ambient temperature due to the temperature mechanism from a liquefied ammonia. Since the system uses ammonia, circulating under pressure, its leak is extremely dangerous for a person and can damage the mucous membrane and respiratory tract. If problems with absorption models are found, the next to immediately communicate in the service center. The procedure for repairing such household appliances is carried out only in factory conditions by professionals equipped with special protection.

Light bulb. error or problem?

Most Samsung models are equipped with an indicator that signals the problems. Often after the purchase, the indicator does not behave for the user. After all, usually the light bulb burns or off constantly, and the couple begins to blink. The most common reasons for the strange behavior of the indicator and display:

Frequent opening of the door leads to an increase in temperature inside and the sensors signal this.

The temperature regime is not configured. If after the purchase the refrigerator was turned on and left alone, doing nothing, the system will respond to negligence and remind the buyer about its duties.

Ice tray. Often a separate indicator for the freezer indicates the wrong position of the tray. It is necessary to change the position and everything is normalized.

When rearranging the door, some indicators begin to flicker. It is necessary to check all the contacts and normalize the tightness.

If you have tried everything from the above and nothing helped, you need to contact the service center.

Refrigerator is an important element of the life of a modern person. This is a technique that manufacturers try to make especially high.quality and reliable, because the health of people depends on the safety of products. However, often much earlier than users expected, the refrigerator breaks. The most common cause is non.compliance with the correct temperature regime. If you want to know how to avoid breakdowns and correctly configure the temperature regime in the Samsung Now Frost refrigerator and similar models, then this article will help you.

Samsung No Frost refrigerator settings with video display

Continuing to use this web site, you agree that Cookies and other means of statistics and online analytics are used on this website, which in certain cases can collect and process information about your visit and activity. Please read the details in the policy of statistical data and cookie files.

Continuing to use this web site, you agree that your personal data can be collected and processed for purposes, in cases and in the manner set forth in politics regarding the processing of personal data on the Internet, which we convincingly ask you to familiarize yourself with.

Continuing to use this web site, you agree that Cookies and other means of statistics and online analytics are used on this website, which in certain cases can collect and process information about your visit and activity. Please read the details in the policy of statistical data and cookie files.

| Denial of responsibility | Contacts |RSS