What to choose a water towel rail for a bathroom

choose, water, towel, rail

Ferrous metal, stainless steel or non-ferrous metals: which material should be preferred??

In apartments with centralized water supply it is better to buy a stainless steel radiator. Stainless steel. The material is not cheap, but it has a good heat output and high resistance to corrosion. For added protection against humidity and hot steam, the body of the coil has a gleaming chrome coating, which looks very smart and contributes to the visual expansion of the bathroom space. However, the bright chrome surfaces must be taken care of carefully, otherwise the product will dull and become covered with scratches.

With a stable hot water supply, all-welded stainless steel coils can withstand high pressure and pressure fluctuations in the network. Carefully check the seams. good sealing of the joints will prolong the lifetime of the radiator. Premium towel rails should be warranted for at least 5 years; medium quality radiators should be warranted for at least 3 years. Looking for a steel towel rail, make sure that the coating has no defects. Enamel and chromium perform a good protective function only if coated evenly, without tears or bubbles.

A spectacular copper and brass towel dryer will cost more than an ordinary steel coil, but at the same time cheaper than the best stainless steel radiators. Copper water towel dryer is the ideal solution for centralized DHW networks: copper does not fear corrosion, overpressure and water hammer, gives off heat intensively and, unlike iron alloys, does not react with impurities contained in water and is generally more durable. No limescale or mineral deposits are deposited on the walls of copper pipes, so blockages are rare. Brass can also boast marked anti-corrosive properties and does not form deposits, but does not tolerate high pressure. Brass towel rails are often purchased for cottages and townhouses with independent plumbing and heating.

The buyer is not entirely free to choose the material for the dryer. The technique of installation of water radiators requires that the coil is made of the same metal or alloy as the main pipeline.

Thermal capacity and the maximum heat of the towel radiator

In the story of how to choose a towel dryer, it is necessary to mention the following characteristics:

  • The maximum heating. As a rule, water models can withstand up to 90-100°C, while electric ones develop “only” 60-70°C. Although in practice the devices are equal. After all, the water supplied can be much cooler. That is why it is better to take these figures indirectly.
  • Thermal capacity. This figure is important for electric and combined towel rails. After all, the power of water radiators depends on the temperature of the water, which can fluctuate greatly. It should be guided by the approximate formula: 50 watts per 1 cubic meter of room.

Key features of water models and selection criteria

The water device is designed for apartments with a separate heating system. Also suitable for facilities that have year-round hot water supply.

Heating the room is provided by the hot water that circulates through the pipes of the device. They heat up and then give out heat. It warms up the air in the bathroom and dries any items.

The advantages of water models are as follows:

  • A wide variety of models. A large variety of products gives you complete freedom of choice. Finding a fixture that fits in the bathroom is simple.
  • Economy. You will not need to pay extra for the work of the water towel rail. You already pay for heating and hot water (with or without the appliance).
  • Safety. They do not emit electromagnetic waves, as electric models. And that is why they are completely safe even in the room with a high level of humidity.
  • Great service life. These devices retain their performance characteristics for many years. As a rule, they are replaced only during major repairs. And even then. just to put a newer model.
See also  Jelly red currants with a juicer

Heated Towel Rail. How to Choose a Model

To choose a suitable water towel rail, you should be guided by the material of manufacture, size and shape.

Production material

In the market of sanitary devices you can find water models made of:

  • Brass, copper, aluminum. They have a good heat output. Universal, look good in any interior. But have a modest service life. up to 10 years.
  • Black steel with chrome plating. Also not very durable, since they are afraid of corrosion.
  • Stainless steel. Are made of solid seamless pipes. Resistant to pressure fluctuations. Also withstand the negative effects of impurities in the water.

The most popular are devices made of stainless steel. All thanks to its advantages and reasonable price.

Dimensions and shape

The last option is the most common. First, it is characterized by a large area of heating. Secondly, it can simultaneously dry all the towels or a large number of just washed laundry.

As for the dimensions, they are chosen individually, taking into account the area of the bathroom. This should not be a problem.

How to choose a towel rail or bathroom radiator

Also do not forget about the nominal water pressure of the system. After all, the thickness and strength of the walls of the towel dryer are selected with this indicator in mind.

How to choose a towel warmer for the bathroom?

Constant contact with water in showers and toilets is a major cause of dampness and fungus. If this problem is not solved, then the joints between the tile and the floor covering near the walls will be covered with black and gray powder, which is not only unaesthetic and dangerous to health.

The towel dryer is an essential attribute of the bathroom, which improves the microclimate, helps to eliminate excessive humidity. By heating the room, the device creates a comfortable environment in the cold season. You can dry wet towels, bathrobes, underdry linen on the “snake”.

Towel rails come in different types, shapes, sizes. what is the first thing to pay attention to when buying? Can the device cope with the functions of heating? Can we do without it??

Let’s try to “lay out on the shelves” these issues and understand what to choose a towel dryer.

What types of towel dryers are there?

All towel rails, present in the market of sanitary equipment, can be divided into three groups.

Water devices

They are originally included in the standard equipment of the bathroom and are a curved tube in the form of a coil, through which the hot water circulates. At the moments of hot water supply cutoff the tubular product operation on purpose is impossible until the end of repair work.

If the device is connected to the heating system, then the period of its use coincides with the heating season. This means that the water towel dryer in this case is idle for more than three months a year. But life never stops, and residents of apartment buildings have to look for a replacement for this equipment.

Electric towel rails

These devices can become a great alternative to the water models. After all, they can operate in stand-alone mode, regardless of the functioning of other systems. There are also no strict requirements to the place of installation of such equipment. That is why you can find electric towel heaters not only in bathrooms, but also in kitchens and hallways. Such equipment only needs an uninterrupted power supply to work. Naturally, the constant use of electric appliances will lead to an increase in bills for the spent kilowatts.

See also  Water heater pressure relief valve where to put

Combined towel dryers

These units combine the design features of water and electric devices, so they can work in one of two modes if necessary. However, many buyers are still discouraged by the cost of such products.

Important! Evaluating the advantages and disadvantages of each type with regard to the individual characteristics of your apartment, you can understand how to choose a towel dryer for the bathroom so that it was beautiful, beneficial and functional.

Water towel rails are the most popular among Russians

How to choose a water towel rail for the bathroom: material

As the material of the water towel rail is used:

Professionals know how to choose a towel dryer by material, we share with you. Black steel is the worst case. This material is most susceptible to corrosion, the action of stray currents. In addition, it is not uncommon for black steel towel rails to use seam pipe, which itself has an unreliable seam. Stainless steel is the best option on the price / quality ratio. Stainless steel, covered with a galvanizing layer, allows avoiding corrosion and stray currents at a relatively low cost. Such towel rails are practically eternal. Copper is the most ideal material, but also the most expensive. We recommend especially the heated towel rails made of stainless steel with a protective coating.

How to choose a water towel dryer?

Towel rail determines the level of heat and comfort in the bathroom. Therefore it is not necessary to install the first device caught. Fortunately, the variety of assortment allows you to choose the model that will successfully combine the operational parameters and aesthetic qualities.

manufacturing material

Traditional clothes dryers, made of little presentable cast-iron pipes, covered with a thick layer of oil paint, long ago ousted by the so-called “design radiators”.

The material of manufacture for such devices is:

Dryers made of black protected steel are easy to corrode, so products from such material are more purchased when equipping country houses, where an autonomous heating system is provided.

Non-ferrous metals are also famous for good heat output. But the service life of structures made of non-ferrous metals is limited to 5-10 years.

If we talk about structures from non-ferrous metals, they are rather preferred due to their interesting appearance. Because of the precipitation and dissolution of impurities in the process of operation of the brass product on the bends and walls of the structure even after the first five years of service will be visible wear of the material.

The most popular, although the most expensive, are considered towel rails made of stainless steel. As a rule, they are made of seamless full-drawn pipes with a wall thickness of 3 mm. Due to such way of production the product gets high resistance to aggressions of hard water and differential pressure.

To give the external presentable appearance stainless steel products are additionally polished or chromed.

Concerning the price issue: painted models are more affordable, while the purchase of a polished device can “hit the “.

Shape and size

The form of the water towel dryer for the bathroom is also important. Today’s leading manufacturers offer such product configurations:

  • Classical models in the form of the letter “P” and “M”, as well as combined versions of “PM”;
  • “S”-shaped products, externally resembling a bending snake;
  • Modernized models equipped with one or two shelves;
  • Decorative versions in the form of stairs, drops, loops and cascades.

On sale are wide and narrow models, oversized designs and compact towel racks, equipped with miniature shelves. The choice is limited only by your preferences and the amount of money you are willing to allocate for such a necessary household attribute.

The designer’s design

The appearance of modern towel dryers can be both banally simple and pretentiously complicated. Depending on the finishing materials involved in the design and color palette that sets the tone in the walls of the bathroom, you can choose products in matte or silver shades.

See also  Kitchen fan with check valve

In the presence of metallic decorative elements in the interior, designers recommend stopping the choice on the chrome equipment. Rather roomy “multi-seat” arches and shelf-equipped circles.

If there are no chrome parts in the decoration of the bathroom, and a light arch or staircase fits harmoniously into the general design, it is more reasonable to choose a painted model in white color. The dryers that look like a sine wave are graceful.

You should not be carried away by overly pretentious options. They can go out of fashion in 2-3 years, and the time-tested classics will please with the laconism of forms for several decades.

Requirements for water pipes

Bathroom. the most humid place in the house and apartment, so you need to provide additional heating of the room. Towel rail helps quickly dry towels or laundry, prevents mold and eliminates damping of floor and wall finishes.

In addition, modern models are a stylish decoration of the bathroom interior, as progressive designers are constantly working on the appearance of the devices.

The water towel dryer in the standard version has a form of a curved tube, in the middle of which the hot water circulates. If the water supply stops circulating, the product stops working.

Choosing a water towel dryer. First of all it is necessary to take into account the pressure level in the pipes. According to current construction standards and GOST requirements, the water pressure in the water intake fixture is more than 6 Atm.

How to choose the heated towel rail? Advantages of water and electric towel rails.

The water pressure in the pipes of apartment buildings can be 2.5-7.5 Atm. The figure depends on the location of construction, the quality of communications and the number of floors in the building. In private homes, the pressure in the pipes is usually 2-3 Atm. Therefore, before buying, you should find out the performance of the plumbing system and add to the obtained value a few positions on the hydraulic impact.

The efficiency of the water towel dryer depends on the area of the pipe reaming. The original design in the form of a ladder has the ability to give the maximum amount of heat and easily endures a hydraulic shock.

When choosing a dryer, you should pay special attention to the diameter of the pipes. In some cases, for the installation and connection of the heating device requires a special adapter.

Electric towel dryer

As for the electric towel radiator, it is used year-round and heating the bathroom does not depend on the timing of the heating season.

It is easily mounted anywhere in the bathroom and the connection can be carried out by cable or by flush mounting. The device is equipped with a thermoregulator with a timer, which allows you to program the towel rail to work in automatic mode.

Please note! The heated towel rail has a lower heat output, and therefore a heater with a higher heat output is needed for heating large-sized bathrooms. In this case it heats effectively, removes excess moisture, than prevents occurrence of a fungus, and the low working temperature completely excludes a burn at a casual touch to the case.

An electric towel dryer is indispensable as an additional heating device and can also be used in summer, when the bathroom is warm enough and a towel dryer is needed only for drying towels. We should also take into account the fact that you can choose the electric towel dryer of any design and color, which will give a certain charm to your bathroom. The disadvantages are the constant consumption of electricity.

Therefore it is impossible to tell which towel dryer is better electric or water, everything depends on concrete conditions, factors and tasks.

| Denial of responsibility | Contacts |RSS